| Content | Providing compatibility between computers and professional equipment, the PLI04USB is a dedicated interface to feed unbalanced stereo audio from USB ports to balanced mic inputs of mixing consoles. Supporting 44.1, 48 and 96 kHz sample rates it provides high quality digital-to-analog conversion with 24-bit resolution. Signal output is transformer balanced on standard wiring male XLR connectors with individual isolating switches for the left and right channels.
Featuring a mono summing switch, the unit effectively doubles as a signal splitter to route the mono signal into separate audio systems. In addition, the PLI04USB features a headphones output with level control for convenient monitoring and a ground lift.
- Dedicated USB to pro audio interface
- High-quality 24-bit D/A converter with 44.1, 48 and 96 kHz sample rates
- Transformer balanced 3-pin XLR outputs
- Individual L and R isolating switches
- Mono summing with signal splitter function
- Headphones output with level control
Product type
Line Isolators
Input connectors
1 : 2, 41000, via USB port
Output connectors
3.5mm TRS, XLR
Output impedance
550 Ohm(s), headphones 43 Ohms Ohm(s)
Frequency response
10 - 41000 Hz
Cabinet material
Aluminium
Cabinet surface
Powder coated
| Behringer DI-400P High-Performance Passive Direct Injection Box
Introducing the Ultra-Compact DI-Boxes from BEHRINGER
There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal.
The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.
This is the sort of medicine that?ll cure headaches in your studio or on stage. |
Inline Transformer IA-2
The model IA-2 line matching transformers !S designed to properly match a low impedance
signal to a low impedance source. The advantage of "ground lift" switching allows to optmize
hum problems.
Technical Data
Frequency response 20 Hz - 20 KHz + 1 dB
Impedance 600 : 600 Ohm
THD K3 50 Hz = 0.5 %
Level < + 6 dBm
Weight 100 g
Dimensions diameter 17 mm, lenght 115 mm
|
Passive DI box especially designed for guitars.
The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow“, "Normal“, or "Bright“.
Technical specifications:
- Input: 6.3 mm jack with parallel "THRU" socket
- Output: male XLR transformer balanced
- Attenuator: (Level switch) 0 dB for line signals, -15 dB for small amps up to 10 w, 30 dB for large amps up to 200 w
- No battery necessary
|
1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal 1 low-impedance output (XLR) Gray housing | Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. |
Reviews
There are no reviews yet.