PEAVEY PR 10 2-WAY SPEAKER SYSTEM

The PR? series delivers superior sound quality by utilizing advanced materials, like its
lightweight, roadworthy molded polypropylene exterior. The PR? 10 is a two-way speaker
system that is lightweight yet rugged for live music or speech applications and will handle
400 watts program and 800 watts peak. It utilizes a heavy-duty 10 inch woofer with a 2
inch voice coil and a RX14? 1.4 inch titanium diaphragm compression driver coupled to
a constant directivity horn. Its durable injection molded enclosure features a black powder-
coated steel grille that provides driver protection and a professional appearance. This system
can be used on the floor, be pole mounted or flown via top and bottom flying inserts.
 Connections are made via two 1/4 inch phone jack connected in parallel to accommodate
daisy-chaining. Now with light weight Neodymium woofer.

Features
Two-way sound reinforcement enclosure
400 Watts program, 800 watts peak
One 10" woofer with 2.375" VC and lightweight neodymium magnet
lightweight neodymium magnet
RX14? compression driver with 1.4 inch titanium diaphragm 1 inch exit
90 x 40 constant directivity horn
Tweeter protection
Heavy-duty crossover
Lightweight molded polypropylene enclosure
Molded-in pole mount system
Heavy-duty metal grille
Now with light weight Neodymium woofer.
 
Specifications
Dimensions 14" W x 19" H x 13.375" D (Unpacked)
16.875" W x 20.25" H x 15.5" D (Packed)
 
Weight 24.5 lbs/ 11.11 Kg. (Packed)
20 lbs/ 9.10 Kg. (Unpacked)

Features

    Hard-suspension bass with Kapton spool
    High-range horn with thermal overload protection
    Integrated high-quality frequency cross-over (not for RSP-18 S)
    Sound characteristics geared especially to heavy-bass sounds like hip hop, techno, house & breaks
    High-performance reserves
    Extremely durable, road-compatible carpeting
    Protective metal corners
    Large carrying shells made of metal
    Sunk-in metal flange for tripods (not RSP-12 M and RSP-30)
    Robust front grid
    Connections via PA pro speaker cable and 6.3 mm jack


Technical Data

    100 watt RMS PA-speaker
    Max. capacity: 200 watt
    Type: 2-way system
    Frequency range: 45 Hz - 20 kHz
    Acoustic pressure: 97 dB
    Speaker: 25 cm (10“) woofer, mid-range and tweeter
    Impedance: 8 ohm
    Dimensions: 530 x 375 x 340 mm
    Weight: 11.5 kg

Specifications

Technical data

Speaker Type    2-Way Passive Speaker
Acoustical data

Nominal Power Rating    300 W/RMS
Program Power Rating    600 W/RMS
Peak Power Rating    900 W/RMS
Impedance    8 Ohms
Sensitivity 1W@1m    96 dB
Frequency Response [-10dB]    70 - 20.000 Hz
Frequency Response [+/- 3dB]    90 - 19.000 Hz
Max SPL    127 dB
HF    1 "
Type HF  Compression Driver
Voice Coil HF    1.5 "
Driver Protection    PTC
Directivity    90X70 °
Horn    CD Horn Aluminium
Rotatable Horn    Yes
Crossover Frequency (passive)    1800 Hz
Slope MF-HF    18 dB/Octave
LF    10 "
Voice Coil LF    2 "
Input Section

Signal Input    1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output    1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics

Housing    Multiplex birch plywood
Housing Design    Multifunctional
Color    Black
Surface Texture    Textured acrylic lacquer
Handles    1x on back
Pole Mount    36mm
Angles Up    Monitore use 45 °
Front Grille    1.5 mm metall grille with acoustic foam in back
Rigging Points    12 x M8
Width    320 mm (12.8 in)
Height    508 mm (20.32 in)
Depth    320 mm (12.8 in)
Weight    14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components

The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications.

 Made for permanent sound placement.

The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES

    10″ 2-way low-profile installation loudspeaker
    10″ high-output ceramic woofer with 2″ voice coil for maximum output
    1.4″ titanium compression driver provides smooth, consistent high-frequency response
    8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
    Rotatable center logo allows for clean presentation in all configurations
    Convenient terminal strip connectivity saves time and cost
    Dual Neutrik parallel connectors
    Lightweight, compact and durable 15mm poplar cabinet construction


SPECIFICATIONS

iP-10 10" 2-Way Passive Loudspeaker

    Frequency range (-10 dB): 50 Hz - 20 kHz
    Coverage pattern: 90° x 50°
    Power handling: 200 watts continuous / 400 watts program
    Max SPL: 124 dB
    Crossover frequency: 3 kHz
    Nominal impedance: 8Ω
    Height: 20.5 in / 520 mm
    Width (Front): 12 in / 310 mm
    Width (Rear): 6.8 in / 172 mm
    Depth: 13.4 in / 340 mm
    Product weight: 26 lb. / 11.8 kg

The C3110 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.

Its compact size makes it ideal for low visibility side wall mounting.The high-frequency section is a constant directivity horn loaded to a 1” Neodymium  compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 10” woofer with a 2” voice coil.