Content |
The PR? 15P packs power and full-range sound quality into one compact loudspeaker. This 2-way powered system contains 270 watts of bi-amped power. A separate amplifier for each speaker provides crystal clear sound even at very high levels. 200 watts powers the heavy-duty 15 inch woofer and 70 watts is dedicated to the RX? 14 compression driver. Both amplifiers feature DDT? compression, which virtually eliminates audible power amplifier clipping. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an eye-pleasing yet durable powered speaker system. The PR? 15P has a built-in three-channel mixer with individual level controls for XLR or 1/4 inch connections. Molded-in handles provide ease of transport while multiple mounting points for pole stand and Peavey Versamount? brackets make it perfect for installs. The Peavey PR? 15P has a variety of applications such as sound reinforcement, public address, side fill system, karaoke, or musical playback. It also makes an excellent stage monitor and can be easily added to an existing sound system. Now with light weight Neodymium woofer.
Features Bi-amplified powered system with 270 watts total peak dynamic power Both power amps have DDT? compression 15" woofer with 2.375" VC with lightweight neodymium magnet RX?14 1.4 inch titanium compression driver Peak SPL up to 120 dB with music Combo jack with 1/4 inch TRS and Female XLR mic or line-level balanced input Two 1/4 inch phone jack inputs with concentric level controls Input mixing built-in Molded-in horn has exceptionally smooth response and pattern control Top and sides handgrips Pole mount molded-in Top and bottom flying point insert Now with light weight Neodymium woofer. Specifications Dimensions 21.25" W x 28.5" H x 17.25" D (Unpacked) 24.25" W x 30.5" H x 19" D (Packed) Weight 50.7 lbs./ 23 Kg. (Packed) 41.2 lbs./ 18.70 Kg. (Unpacked) |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 6.5" (Mid), 1.75" (H)
HF Driver Power Amp 500W Class D (Shared Between Mid and HF)
Frequency Range 35Hz-20kHz (-10dB)
Crossover Frequency 500Hz, 2.1kHz
Maximum Peak SPL 134dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 43.1“
Width 18.5“
Depth 16.8“
Weight 87 lb.
Manufacturer Part Number KW153
|
Product Features:
High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
High-performance MP3 player included to play audio files via USB stick
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Features: DH-1K 1.5-inch Titanium Diaphragm Compression Driver EVS-15K 15-inch Woofer 124 dB max. SPL 500 W Class-D Amplifier Integrated DSP with FIR filter Cabinet Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design Maximum Amplifier Output Capability, IHF-A 500 W Amplifier Power RMS 420 W Max. SPL 1m / calc. 124 dB Frequency Range (-10 dB) 50 Hz to 17 kHz Nominal Coverage Angle 90° x 50° (Horizontal x Vertical) Audio Input (LINE 1 or MIC/LINE 2) XLR and 1/4" TRS combination Audio Input (AUX) Stereo RCA, unbalanced Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 1.7 kHz Product Dimensions (W x H x D) 708 x 432 x 382 mm Net Weight 22.5 kg Optional Accessories --- SH-115A, Dust Cover F01U270396 VPM 1500, variable speaker pole F01U141047 BS 35, speaker stand F01U141046 |
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
|
Reviews
There are no reviews yet.