| Content |
The PR? 15P packs power and full-range sound quality into one compact loudspeaker.
This 2-way powered system contains 270 watts of bi-amped power. A separate amplifier
for each speaker provides crystal clear sound even at very high levels. 200 watts powers
the heavy-duty 15 inch woofer and 70 watts is dedicated to the RX? 14 compression driver.
Both amplifiers feature DDT? compression, which virtually eliminates audible power amplifier
clipping. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal
form, with a coated steel grille to offer an eye-pleasing yet durable powered speaker system.
The PR? 15P has a built-in three-channel mixer with individual level controls for XLR or 1/4 inch
connections. Molded-in handles provide ease of transport while multiple mounting points for
pole stand and Peavey Versamount? brackets make it perfect for installs. The Peavey PR?
15P has a variety of applications such as sound reinforcement, public address, side fill system,
karaoke, or musical playback. It also makes an excellent stage monitor and can be easily
added to an existing sound system. Now with light weight Neodymium woofer.
Features
Bi-amplified powered system with 270 watts total peak dynamic power
Both power amps have DDT? compression
15" woofer with 2.375" VC with lightweight neodymium magnet
RX?14 1.4 inch titanium compression driver
Peak SPL up to 120 dB with music
Combo jack with 1/4 inch TRS and Female XLR mic or line-level balanced input
Two 1/4 inch phone jack inputs with concentric level controls
Input mixing built-in
Molded-in horn has exceptionally smooth response and pattern control
Top and sides handgrips
Pole mount molded-in
Top and bottom flying point insert
Now with light weight Neodymium woofer.
Specifications
Dimensions 21.25" W x 28.5" H x 17.25" D (Unpacked)
24.25" W x 30.5" H x 19" D (Packed)
Weight 50.7 lbs./ 23 Kg. (Packed)
41.2 lbs./ 18.70 Kg. (Unpacked)
|
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
|
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features :
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for
extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated
die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).
Optional DPCN (CobraNet?) digital audio input
module available.
Specifications:
|
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
|
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
|
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
|
Directivity Factor (Q) |
: |
15.85 |
|
Directivity Index (DI) |
: |
12 dB |
|
Maximum Peak Output1 |
: |
138 dB SPL 1m |
|
Transducer Section |
|
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
|
Bandpass
Nominal Impedance |
: |
4 ohms |
|
Mid/High
Frequency Section |
: |
|
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer |
|
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
|
Waveguide |
: |
JBL PT-K64-MHF |
|
Bandpass
Nominal Impedance |
: |
8 ohms
|
|
System |
|
|
|
DP2 Internal
Amplification Output
(at nominal load) |
: |
2200 Watts Peak,
1100 Watts Continuous |
|
DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance) |
: |
750LF/350HF Watts |
|
DP2 Output Section |
: |
2-Channel, Class I |
|
Audio Input connector: |
: |
XLR with loop-through |
|
Network
Control Connector |
: |
Ethernet, RJ45 |
|
Signal Processing |
: |
DSP Based, resident in
Input Module |
|
System Management
|
: |
DSP based limiters for mechanical
and thermal protection |
|
AC Power
Operating Range |
: |
Auto Select 90-132VAC/
216-264VAC, 50/60Hz
|
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%) |
|
AC Input Connector |
: |
Neutrik PowerCon |
|
AC Loop-Thru |
: |
Neutrik PowerCon |
|
AC Current Requirement |
: |
6A per system at 120V, 3A per
system at 240V |
|
Enclosure |
|
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.
|
|
Suspension System |
: |
6 standard air-cargo 3 in. track
and 12 M10 fittings
|
|
Grille |
: |
14 Gauge Black powder-coated
perforated steel with foam backing
|
|
Dimensions
(H x W x D) |
: |
914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in) |
|
Net Weight |
: |
44 kg (97 lb) | |
Two-way active full range with DSP. 1500W
15'' woofer, 3'' driver, 50 x 40 dispersion.
1000W + 500W class D power amplifier.
Optional: LD2.4 USB interface for remote PC connection.
CV-Spot protective cover. NOTE : SPOT 1500 can not drive the bass cabinet SPOT15B.
|
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
GENERAL
The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.
JB Systems PSA-15 Speaker: Polypropylene
The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.
CONNECTIONS
The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included. |
Reviews
There are no reviews yet.