Content | Overview
The PVX 12 passive loudspeakers deliver superior sound quality by utilizing advanced materials like its lightweight, roadworthy molded polypropylene exterior. Lightweight, durable and voiced for live music or speech applications, these two-way speaker systems will handle 400 watts program and 800 watts peak power and feature heavy-duty woofers, 2-3/8" voice coils and the Peavey RX14™ 1.4-" titanium diaphragm compression driver coupled to a constant directivity horn.
Features
- 400 watts program
- 800 watts peak
- Top, bottom and right side flying point inserts
- Full-coverage heavy-duty perforated steel grille, with powder-coat finish
- Rugged Construction
- Patented, asymmetrical Quadratic Throat
- Waveguide™ Technology - 100º by 50º coverage. 15º upward and 35º downward directing sound to your audience
- RX14™ - Titanium Compression Driver
- Weight Unpacked: 37.00 lb(16.783 kg)
- Weight Packed: 43.00 lb(19.505 kg)
- Width Packed: 20“(50.8 cm)
- Height Packed: 26.75“(67.945 cm)
- Depth Packed: 18.25“(46.355 cm)
|
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 133 dB | | Horizontal coverage angle: | 60° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 100 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 2000 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12“woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600/23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs | |
|
Features * DVX3121 12" LF Transducer with forced air cooling * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver * 90° x 50° Coverage Pattern * 600W Continuous (2400W peak) power handling * High sensitivity, 131 dB maximum SPL * Adjustable monitor angle (45° or 55°) * 2 Anchor plates for single stud fittings and 7integral suspension points * Available in black or white * Passive/biamp selectable * Full line of accessories Specifications * Frequency Response (-3dB): 58Hz-15kHz * Frequency Range (-10dB): 48Hz-20kHz * Rec. Hipass Frequency: 50Hz * Axial Sensitivity: 97dB (1W/1m) * Max. Calculated SPL: 131 dB * Horizontal Coverage: 90° * Vertical Coverage: 50° * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak * LF Transducer: DVX3121, 12" driver * HF Transducer: ND2, 1" exit Neodymium compressiondriver * Crossover Frequency: 2kHz * Nominal Impedance: 8 ohms * Minimum Impedance: 6.2 ohms * Connectors: (2) Neutrik Speakon NL4\'s * Enclosure Material: Polypropylene structural foam * Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“ * Net Weight: 43.7 lbs * Shipping Weight: 48.6 lbs | A fullrange enclosure in classic 12“/1" format, this cabʼs balanced sonic image, speech intelligibility, and high SPL are certainly impressive. It is the perfect satellite for the PR:O 18 S. The PR:O 12 MA also features 600 watts power circuitry and a Speakon® port for connecting a passive auxiliary cabinet.
Features
Application: Fullrange Cabinet / Satellit
Power Capacity: 400/800 Watt
Max. SPL: 128 dB
Frequency Range: 68 Hz – 19 kHz
Title PREMIUM PR:O
Product Class Passive Systems
Model PR:O 12
Info Classic full-range cabinet doubles as compact PA or part of satellite system.
Power-handling nominal (RMS) 400 W
Power-handling, peak 1200 W
Power-handling, program 800 W
Frequency response +/- 3 dB 68 Hz – 19 kHz
Frequency response -10 dB 60 Hz – 19 kHz
Nominal impedance 8 ohms
Sensitivity 1W 104 dB
Maximum SPL, @ 10% THD 128 dB
Connections 2x Speakon
LF Speaker 12"
HF Driver 1"
Horn characteristics 60° x 40° CD horn
HF protection (passive) Dyn. protective circuit
Crossover frequency 2 kHz,12 dB / oct.
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 2, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 39 cm x 57 cm x 36 cm
Weight 18,5 kg / 40.8 lbs. |
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1 |
Reviews
There are no reviews yet.