PIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Black

Original price was: €349.00.Current price is: €340.00. incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Up to 30W per Channel at 8 Ohms
  • 2-Channel Amplifier Configuration
  • 4x Stereo RCA, 1x Phono MM Stereo RCA-In
  • 1/4″ Headphone Jack
  • Up to 30W per Channel at 8 Ohms
  • 2-Channel Amplifier Configuration
  • 4x Stereo RCA, 1x Phono MM Stereo RCA-In
  • 1/4″ Headphone Jack

 

Read more

Enjoy enhanced quality stereo sound with your music source, speakers, and the Pioneer A-10AE Stereo 60W Integrated Amplifier. It delivers up to 30W per channel at 8 ohms and has a phono MM input and four stereo RCA inputs. The A-10AE features a front-panel 1/4″ headphone jack for private listening.

Direct Energy Amplification
Pioneer’s Direct Energy Design is based on the Direct Energy Concept – lossless transfer of energy from the amplifier to the speakers. Using this philosophy, the integrated amplifiers feature optimized power supply/output circuit blocks and an enhanced part layout. This helps the amp reproduce clear sound with reduced distortion for an enhanced signal transfer and high S/N ratio.
Isolated Power Supply
The windings for the power amplifier, pre-amplifier, and controls are each separated inside the power transformer to help prevent mutual noise interference.
Direct Function
This playback mode bypasses all circuits other than the volume to provide a pure listening experience for your musical content. It features a finely tuned design to help enhance the musicality.
Anti-Standing Wave Insulators
These insulators feature a design with no parallel sides inside to prevent cavity resonance. This helps make sound localization, tone, and scale clearer while also contributing to a seamless connection between the channels and enhanced response to quick sound.
Non-Magnetic Speaker Terminals
The speaker terminals use non-magnetic material, which is less susceptible to external noise and transmits signals to the speakers at higher purity.
Phono (MM) Input
The A-10AE is equipped with a phono input terminal, letting you connect your turntable to enjoy your vinyl records.
Auto Standby
The amplifier automatically switches to standby mode after 20 minutes without audio input or operation.
Additional Features
  • Screw-type speaker terminals support thick cables
  • Balance and loudness control
Number of Channels
2
Power Rating
30 W per Channel @ 8 Ohms, 20 Hz to 20 kHz, 0.7% THD, 2 Channels Driven, FTC
50 W per Channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2 Channels Driven, FTC
Speaker Impedance
4 to 16 Ohms
Frequency Response
10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
Signal to Noise Ratio
Line In, Speaker Out: 103 dB
THD
0.05% @ 8 Ohms, 1 kHz, Half Power
Damping Factor
Not Specified by Manufacturer
Tone Control
Bass: ±10 dB, 100 Hz
Treble: ±10 dB, 10 kHz
Connectors
Input
5 x Stereo RCA (1 Phono with Ground Screw)
Output
1 x Stereo RCA Line Out
1 x 1/4″ / 6.35 mm headphone (front)
Speaker Connectors
2 x Binding Post Pairs
Physical Specifications
Construction Material
Chassis: 1.6 mm Thick Steel
Power Requirements
120 VAC, 60 Hz
Power Consumption (Active)
130 W
Power Consumption (Standby)
0.1 W
Dimensions
17.13 x 5.06 x 12.72″ / 435 x 129 x 323 mm
Weight
15 lb / 6.8 kg
Weight 7.50 kg

Reviews

There are no reviews yet.

Be the first to review “PIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

PIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Black removeCAMBRIDGE AUDIO CX A80 Integrated Amplifier 80W with DAC removeYAMAHA A-S201 (S) Integrated Amplifier removeCAMBRIDGE AUDIO 851A HI-FI AMPLIFIER 120W 8 Ohms 200W 4 Ohms removeYAMAHA A-S301 (B) AMPLIFIER removeAUDIOENGINE N22 Premium Desktop Audio Amplifier 22W per channel iPOD, iPHONE, PC, TV remove
NamePIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Black removeCAMBRIDGE AUDIO CX A80 Integrated Amplifier 80W with DAC removeYAMAHA A-S201 (S) Integrated Amplifier removeCAMBRIDGE AUDIO 851A HI-FI AMPLIFIER 120W 8 Ohms 200W 4 Ohms removeYAMAHA A-S301 (B) AMPLIFIER removeAUDIOENGINE N22 Premium Desktop Audio Amplifier 22W per channel iPOD, iPHONE, PC, TV remove
Imagea-10ae-blackpioneer-amplifier-stereo-hifi-integrated
SKUA10AEBMGPCXA80S000.30899851AS000.30902N22
Rating
Price Original price was: €349.00.Current price is: €340.00. incl. GR VAT Original price was: €1,230.00.Current price is: €1,229.00. incl. GR VAT Original price was: €289.00.Current price is: €279.30. incl. GR VAT Original price was: €1,900.00.Current price is: €1,899.00. incl. GR VAT Original price was: €433.00.Current price is: €417.89. incl. GR VAT Original price was: €200.00.Current price is: €198.40. incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Up to 30W per Channel at 8 Ohms
  • 2-Channel Amplifier Configuration
  • 4x Stereo RCA, 1x Phono MM Stereo RCA-In
  • 1/4" Headphone Jack
Content
Enjoy enhanced quality stereo sound with your music source, speakers, and the Pioneer A-10AE Stereo 60W Integrated Amplifier. It delivers up to 30W per channel at 8 ohms and has a phono MM input and four stereo RCA inputs. The A-10AE features a front-panel 1/4" headphone jack for private listening.
Direct Energy Amplification
Pioneer's Direct Energy Design is based on the Direct Energy Concept – lossless transfer of energy from the amplifier to the speakers. Using this philosophy, the integrated amplifiers feature optimized power supply/output circuit blocks and an enhanced part layout. This helps the amp reproduce clear sound with reduced distortion for an enhanced signal transfer and high S/N ratio.
Isolated Power Supply
The windings for the power amplifier, pre-amplifier, and controls are each separated inside the power transformer to help prevent mutual noise interference.
Direct Function
This playback mode bypasses all circuits other than the volume to provide a pure listening experience for your musical content. It features a finely tuned design to help enhance the musicality.
Anti-Standing Wave Insulators
These insulators feature a design with no parallel sides inside to prevent cavity resonance. This helps make sound localization, tone, and scale clearer while also contributing to a seamless connection between the channels and enhanced response to quick sound.
Non-Magnetic Speaker Terminals
The speaker terminals use non-magnetic material, which is less susceptible to external noise and transmits signals to the speakers at higher purity.
Phono (MM) Input
The A-10AE is equipped with a phono input terminal, letting you connect your turntable to enjoy your vinyl records.
Auto Standby
The amplifier automatically switches to standby mode after 20 minutes without audio input or operation.
Additional Features
  • Screw-type speaker terminals support thick cables
  • Balance and loudness control
Number of Channels
2
Power Rating
30 W per Channel @ 8 Ohms, 20 Hz to 20 kHz, 0.7% THD, 2 Channels Driven, FTC 50 W per Channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2 Channels Driven, FTC
Speaker Impedance
4 to 16 Ohms
Frequency Response
10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
Signal to Noise Ratio
Line In, Speaker Out: 103 dB
THD
0.05% @ 8 Ohms, 1 kHz, Half Power
Damping Factor
Not Specified by Manufacturer
Tone Control
Bass: ±10 dB, 100 Hz Treble: ±10 dB, 10 kHz
Connectors
Input
5 x Stereo RCA (1 Phono with Ground Screw)
Output
1 x Stereo RCA Line Out 1 x 1/4" / 6.35 mm headphone (front)
Speaker Connectors
2 x Binding Post Pairs
Physical Specifications
Construction Material
Chassis: 1.6 mm Thick Steel
Power Requirements
120 VAC, 60 Hz
Power Consumption (Active)
130 W
Power Consumption (Standby)
0.1 W
Dimensions
17.13 x 5.06 x 12.72" / 435 x 129 x 323 mm
Weight
15 lb / 6.8 kg

Choosing the DAC

Both our CXA60 and CXA80 amplifiers employ the same Wolfson WM8740 DAC, and thereʼs a very good reason for that: it sounds superb! There are more recent Wolfson DACs in circulation, however none sound quite as great as the WM8740 in our view. Which is why, time and again, we choose them.

  Two-into-one transformer

The CXA80 utilises two separate windings on the oversize toroidal transformer. In effect, this is like having two toroidal transformers wound onto one chassis, providing separate windings for each amplification module. If you get a huge transient in the right channel, it wonʼt unsettle whatʼs going on in the left. The current is being drawn from a different path, rather than a common path, so the output is stable and remains unflustered, whether your liking is for Little Richard or Lamb of God.

Dynamic Thermal Tracking transistors

The transistors used by the CXA80 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can rebias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA80 is always running at optimum performance.

Musical Subwoofer output

If you want to use a subwoofer as part of your speaker complement, the CXA80 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3KHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Reinventing the signal path

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet.

 

Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA80 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well. Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences.

This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier.We can hear very clearly what each of those components is doing.

 

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

High resolution asynchronous USB

In order to offer 24-bit 192kHz resolution via asynchronous USB we use a specialist XMOS device dedicated to the USB input. Weʼve also written a custom driver to allow PC users to access the higher sample rates available in USB Audio 2 mode. This bespoke code allows us to stream audio files at the highest possible resolution.

Bespoke Bluetooth

If you want to use your CXA80 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100, including the aptX implementation, is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Embracing classic design

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA80 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA80 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA80 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.

 

 

  • Power output:80W RMS into 8 Ohms, 120W RMS into 4 Ohms
  • DAC:Wolfson WM8740
  • Frequency Response:
High sound quality and sophisticated design based on Yamahaʼs rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
  • Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
  • Pure Direct Mode for greater sound purity
  • Simple and sophisticated design
  • Phono MM terminal for vinyl playback
  • Screw-type speaker terminals
  • Speaker selector and speaker terminals for two systems
  • Simple design remote control
  • Head phone terminal

Class XD™ amplification designed to eliminate crossover distortion at low signal levels
New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms.
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers
A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box
CAP5 protection technology for trouble free operation
Acoustically damped full metal chassis with thick brushed aluminium front panel
Customisable front panel display
Balanced and unbalanced analogue audio inputs for superior connectivity
RS232 controllable
Eco-friendly Available in black and silver finishes


Designed for excellent sound quality, with a beautiful appearance.
An integrated amplifier with the advantage of digital input.

    ToP-ART (Total Purity Audio Reproduction Technology) and high quality parts
    - I/O (input to output) Direct Symmetrical Design
    - ART (Anti-Resolution and Tough) Base
    - Custom-made power transformer / 6,800uF block capacitors / Aluminum-extruded heat sinks
    95W x 2 (max), 60W x 2 (RMS) high power output
    Pure Direct Mode for Greater Sound Purity
    Continuous Variable Loudness Control
    Digital audio inputs for TV or Blu-ray Player
    Connection for YBA-11 Bluetooth Wireless Adapter
    Simple yet sophisticated design (aluminium front panel and knobs)
    Auto Power Standby

Audioengine N22 General Specifications
Type: Compact Integrated Stereo Amplifier Power Output: 80W peak total (22W RMS/40W peak per channel), AES Amplifier type: Dual Class A/B Voltages: 110-240V, 50/60Hz auto-switching for worldwide voltages Inputs: RCA and 1/8" (3.5mm) mini-jack Outputs: RCA variable preamp Speaker outputs: 5-way binding posts SNR: >95dB A-weighted THD+N:

Weight7.50 kg9.00 kg6.70 kg8.40 kg9.00 kg1.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.50 kg
Weight 9.00 kg
Weight 6.70 kg
Weight 8.40 kg
Weight 9.00 kg
Weight 1.60 kg