PIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Silver

Original price was: €349.00.Current price is: €340.00. incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Up to 30W per Channel at 8 Ohms
  • 2-Channel Amplifier Configuration
  • 4x Stereo RCA, 1x Phono MM Stereo RCA-In
  • 1/4″ Headphone Jack
  • Up to 30W per Channel at 8 Ohms
  • 2-Channel Amplifier Configuration
  • 4x Stereo RCA, 1x Phono MM Stereo RCA-In
  • 1/4″ Headphone Jack

 

Read more

Enjoy enhanced quality stereo sound with your music source, speakers, and the Pioneer A-10AE Stereo 60W Integrated Amplifier. It delivers up to 30W per channel at 8 ohms and has a phono MM input and four stereo RCA inputs. The A-10AE features a front-panel 1/4″ headphone jack for private listening.

Direct Energy Amplification
Pioneer’s Direct Energy Design is based on the Direct Energy Concept – lossless transfer of energy from the amplifier to the speakers. Using this philosophy, the integrated amplifiers feature optimized power supply/output circuit blocks and an enhanced part layout. This helps the amp reproduce clear sound with reduced distortion for an enhanced signal transfer and high S/N ratio.
Isolated Power Supply
The windings for the power amplifier, pre-amplifier, and controls are each separated inside the power transformer to help prevent mutual noise interference.
Direct Function
This playback mode bypasses all circuits other than the volume to provide a pure listening experience for your musical content. It features a finely tuned design to help enhance the musicality.
Anti-Standing Wave Insulators
These insulators feature a design with no parallel sides inside to prevent cavity resonance. This helps make sound localization, tone, and scale clearer while also contributing to a seamless connection between the channels and enhanced response to quick sound.
Non-Magnetic Speaker Terminals
The speaker terminals use non-magnetic material, which is less susceptible to external noise and transmits signals to the speakers at higher purity.
Phono (MM) Input
The A-10AE is equipped with a phono input terminal, letting you connect your turntable to enjoy your vinyl records.
Auto Standby
The amplifier automatically switches to standby mode after 20 minutes without audio input or operation.
Additional Features
  • Screw-type speaker terminals support thick cables
  • Balance and loudness control
Number of Channels
2
Power Rating
30 W per Channel @ 8 Ohms, 20 Hz to 20 kHz, 0.7% THD, 2 Channels Driven, FTC
50 W per Channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2 Channels Driven, FTC
Speaker Impedance
4 to 16 Ohms
Frequency Response
10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
Signal to Noise Ratio
Line In, Speaker Out: 103 dB
THD
0.05% @ 8 Ohms, 1 kHz, Half Power
Damping Factor
Not Specified by Manufacturer
Tone Control
Bass: ±10 dB, 100 Hz
Treble: ±10 dB, 10 kHz
Connectors
Input
5 x Stereo RCA (1 Phono with Ground Screw)
Output
1 x Stereo RCA Line Out
1 x 1/4″ / 6.35 mm headphone (front)
Speaker Connectors
2 x Binding Post Pairs
Physical Specifications
Construction Material
Chassis: 1.6 mm Thick Steel
Power Requirements
120 VAC, 60 Hz
Power Consumption (Active)
130 W
Power Consumption (Standby)
0.1 W
Dimensions
17.13 x 5.06 x 12.72″ / 435 x 129 x 323 mm
Weight
15 lb / 6.8 kg
Weight 7.50 kg

Reviews

There are no reviews yet.

Be the first to review “PIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Silver”

Your email address will not be published. Required fields are marked *

Quick Comparison

PIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Silver removeCAMBRIDGE AUDIO 851A HI-FI AMPLIFIER 120W 8 Ohms 200W 4 Ohms removeLYRIC AUDIO TI 120 signature M TUBE AMPLIFIER removeYAMAHA A-S201 Integrated Amplifier 2 x 140W removeARCAM FMJ P49 Integrated Amplifier 2x 200W 8Ω removeCAMBRIDGE AUDIO CX A60 Integrated Amplifier 60W with DAC (Silver) remove
NamePIONEER A-10AE 50Wx2 Integrated Stereo Amplifier, Silver removeCAMBRIDGE AUDIO 851A HI-FI AMPLIFIER 120W 8 Ohms 200W 4 Ohms removeLYRIC AUDIO TI 120 signature M TUBE AMPLIFIER removeYAMAHA A-S201 Integrated Amplifier 2 x 140W removeARCAM FMJ P49 Integrated Amplifier 2x 200W 8Ω removeCAMBRIDGE AUDIO CX A60 Integrated Amplifier 60W with DAC (Silver) remove
Imagea-10ae-silver-pioneer-amplifier-stereo-hifi
SKUA10AESMGP851ATI 120 signature MS000.30898FMJP49CX A60 SILVER
Rating
Price Original price was: €349.00.Current price is: €340.00. incl. GR VAT Original price was: €1,900.00.Current price is: €1,899.00. incl. GR VAT Original price was: €3,276.42.Current price is: €3,112.59. incl. GR VAT Original price was: €289.00.Current price is: €279.30. incl. GR VAT4,536.59 incl. GR VAT Original price was: €894.99.Current price is: €894.00. incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Up to 30W per Channel at 8 Ohms
  • 2-Channel Amplifier Configuration
  • 4x Stereo RCA, 1x Phono MM Stereo RCA-In
  • 1/4" Headphone Jack
Content
Enjoy enhanced quality stereo sound with your music source, speakers, and the Pioneer A-10AE Stereo 60W Integrated Amplifier. It delivers up to 30W per channel at 8 ohms and has a phono MM input and four stereo RCA inputs. The A-10AE features a front-panel 1/4" headphone jack for private listening.
Direct Energy Amplification
Pioneer's Direct Energy Design is based on the Direct Energy Concept – lossless transfer of energy from the amplifier to the speakers. Using this philosophy, the integrated amplifiers feature optimized power supply/output circuit blocks and an enhanced part layout. This helps the amp reproduce clear sound with reduced distortion for an enhanced signal transfer and high S/N ratio.
Isolated Power Supply
The windings for the power amplifier, pre-amplifier, and controls are each separated inside the power transformer to help prevent mutual noise interference.
Direct Function
This playback mode bypasses all circuits other than the volume to provide a pure listening experience for your musical content. It features a finely tuned design to help enhance the musicality.
Anti-Standing Wave Insulators
These insulators feature a design with no parallel sides inside to prevent cavity resonance. This helps make sound localization, tone, and scale clearer while also contributing to a seamless connection between the channels and enhanced response to quick sound.
Non-Magnetic Speaker Terminals
The speaker terminals use non-magnetic material, which is less susceptible to external noise and transmits signals to the speakers at higher purity.
Phono (MM) Input
The A-10AE is equipped with a phono input terminal, letting you connect your turntable to enjoy your vinyl records.
Auto Standby
The amplifier automatically switches to standby mode after 20 minutes without audio input or operation.
Additional Features
  • Screw-type speaker terminals support thick cables
  • Balance and loudness control
Number of Channels
2
Power Rating
30 W per Channel @ 8 Ohms, 20 Hz to 20 kHz, 0.7% THD, 2 Channels Driven, FTC 50 W per Channel @ 4 Ohms, 20 Hz to 20 kHz, 0.9% THD, 2 Channels Driven, FTC
Speaker Impedance
4 to 16 Ohms
Frequency Response
10 Hz to 100 kHz, +1, -3 dB (Direct Mode)
Signal to Noise Ratio
Line In, Speaker Out: 103 dB
THD
0.05% @ 8 Ohms, 1 kHz, Half Power
Damping Factor
Not Specified by Manufacturer
Tone Control
Bass: ±10 dB, 100 Hz Treble: ±10 dB, 10 kHz
Connectors
Input
5 x Stereo RCA (1 Phono with Ground Screw)
Output
1 x Stereo RCA Line Out 1 x 1/4" / 6.35 mm headphone (front)
Speaker Connectors
2 x Binding Post Pairs
Physical Specifications
Construction Material
Chassis: 1.6 mm Thick Steel
Power Requirements
120 VAC, 60 Hz
Power Consumption (Active)
130 W
Power Consumption (Standby)
0.1 W
Dimensions
17.13 x 5.06 x 12.72" / 435 x 129 x 323 mm
Weight
15 lb / 6.8 kg

Class XD™ amplification designed to eliminate crossover distortion at low signal levels
New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms.
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers
A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box
CAP5 protection technology for trouble free operation
Acoustically damped full metal chassis with thick brushed aluminium front panel
Customisable front panel display
Balanced and unbalanced analogue audio inputs for superior connectivity
RS232 controllable
Eco-friendly Available in black and silver finishes


Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.

 

echnical specification
 

 

 

Integrated Amplifier

Frequency response:

10 Hz - 50 kHz (± 0.5 dB)

Total harmonic distortion (THD):

1 % (1 kHz)

Signal-to-noise ratio:

92 dB

Input Impedance:

100 kOhm

 

 

Vacuum tube:

4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7

Dimensions W x H x D:

440 x 220 x 390 mm

Weight:

28 kg

Accessories:

Remote Control

Input Terminals:

Tape, CD, AUX, Tuner

Output terminals:

Tape out

Circiut:

Class A/B P.P.

Colour:

Chassis chrome, transformer black

Colour front:

black, silver

Sensitivity

590 mV

Output Impedance:

4 Ohm, 8 Ohm

Power Output:

2 x 70 Watt @ 1 % THD

Consumption:

max. 380 Watt

Highlights

switchable reduction of feedback

 

High sound quality and sophisticated design based on Yamaha\'s rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
  • Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
  • Pure Direct Mode for greater sound purity
  • Simple and sophisticated design
  • Phono MM terminal for vinyl playback
  • Screw-type speaker terminals
  • Speaker selector and speaker terminals for two systems
  • Simple design remote control
  • Head phone terminal
Specs Receiver / Integrated Amplifier
Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) 140 W + 140 W
Maximum Power(8 ohms, 1 kHz, 10% THD) 100 W + 100 W
High Dynamic Power/Channel (8/6/4/2 ohms) 125 W/150 W/165 W/180 W
Frequency Response 10 Hz-100 kHz(0 ± 0.5 dB / 0 ± 3.0 dB)
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) 0.2%
Signal-to-Noise Ratio (CD) 100 dB (S: 500 mV)
Input Sensitivity (CD) 500 mV / 47 k-ohms
Standby Power Consumption 0.5 W
Dimensions (W x H x D) 435 x 141 x 333 mm; 17-1/8" x 5-1/2" x 13-1/8“
Weight 6.7 kg; 14.8 lbs.

Technical Specifications

Continuous power output, per channel, 8Ω

  • Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
  • Single, 4Ω, at 1kHz - 400W

Inputs

  • Nominal sensitivity  for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
  • Input impedance - 10kΩ
  • Frequency response 20Hz-20kHz +/- 0.05dB
  • Signal/noise ratio (Awtd) 50W / 8Ω - 110dB
   

General

  • Power consumption (standby) -

Toroidal Transformer

We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.

  Dynamic Thermal Tracking transistors

The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can re-bias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA60 is always running at optimum performance.

Musical Subwoofer output

If you want to use a subwoofer as part of your speaker complement, the CXA60 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3kHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Fully balanced signal management

Thereʼs some revolutionary signal management happening beneath the lid of the CXA60. For the first time, our engineers decided to go fully balanced rather than single-ended all the way through. As a consequence, any noise that that might be picked up in the audio signal while routing through the amplifier is cancelled before itʼs output.

Reinventing the signal path

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet. Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA60 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well.

 

Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences. This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier. We can hear very clearly what each of those components is doing.

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

 

Bespoke Bluetooth

If you want to use your CXA60 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100 is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Embracing classic design

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA60 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA60 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA60 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.


   
  • Power output:60W RMS into 8 Ohms, 90W RMS into 4 Ohms
  • DAC:Wolfson WM8740
  • Frequency Response:
Weight7.50 kg8.40 kg28.00 kg6.70 kg20.00 kg8.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 7.50 kg
Weight 8.40 kg
Weight 28.00 kg
Weight 6.70 kg
Weight 20.00 kg
Weight 8.30 kg