Content | User-friendly control layout
High-torque direct drive system
Designed for optimal sound quality
Tempo control with variable width levels
Detachable power and audio cables
MAIN SPECIFICATIONS
Power Requirements AC 110-120V/220-240V, 50 Hz/60Hz
Power Consumption 9W
Output RCA x 1
Main Unit Weight 28.88 lbs.
Maximum Dimensions 17.83” (W) x 6.25” (H) x 13.89” (D)
TURNTABLE
Drive Method Quartz lock serve type direct drive
Wow and Flutter 0.1% or less WRMS (JIS WTD)
Motor 3-phase brushless DC motor
S/N Ratio 70dB (DIN-B)
Braking System Electronic brake
Turntable Aluminum die-casting diameter: 13.07”
Rotation Speed 33-1/3rpm, 45rpm
Starting Torque 4.5kg-cm or more
Rotation Speed Adjustment Range ±8%, ±16%, ±50%
Start Time 0.3 seconds (at 33 1/3rpm)
TONE ARM
Arm Type Universal type S-shape tone arm, gimbal-supported type bearing structure, static type balance
Tracking Error Within 3º
Effective Length 9.05”
Arm Height Adjustment Range 0.23”
Overhang 0.59”
Stylus Pressure Variable Range 0oz to 0.14oz (1 scale 0, 0.03oz)
Proper Cartridge Weight Single cartridge: 0.12oz to 0.45oz (When shell weight is used: 0.12oz to 0.22oz)
When only balanced weight is used: 0.21oz to 0.35oz (When sub weight is used: 0.33 to 0.45oz) | |
Features
- NEW features of the MK2 version:
- Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
- More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
- Particularly light weight and rigid, satin aluminium material used for tone arm
- Adjustable Pitch scale for precise adjustments
- Optional ground terminal offers additional protection in complex club & studio environments
- Easily replaceable, freely rotatable LED needle light in new aluminium design
- High-quality and hard-wearing deep black, metallic finish
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 - 6 sec.)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
- Precision manufactured, die cast aluminium turntable
- Rubber inlays for reduction of vibrations and background noise
- Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
- Quartz lock
- Additional start/stop button for vertical positioning
- Reverse function: switch for forwards and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no grounding required)
- Removable mains and RCA cable
- Safety mains switch
- Shock-absorbing feet against vibrations
Technical Data
Turntable:
-
- Type: direct-drive turntable
- Drive: quartz driven upper-torque direct drive
- Motor: 16-pole, 3-phase, brushless motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
- Starting torque: 2.8 – 4.5 kg/cm (adjustable)
- Adjustable stop time (0.2 - 6 sec.)
- Start-up time / change to RPM: 55dB (DIN-B)
- Brake system: electronic brake
Platter:
-
- Material: die cast aluminium
- Diameter: 332 mm
- Weight: approx. 1.5 kg
Tone arm:
-
- Type: universal, static balanced, S-shaped
- Effective length: 230 mm
- Overhang: 15 mm
- Tracking error range: < 3°
- VTA setting range: 0-6 mm
- Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
- Anti-skating range: 0 – 3 g
- Effective tone arm mass: 30 g
Connections:
-
- 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
General:
-
- Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
- Power consumption: 13 W
- Dimensions: 458 x 354 x 144,6 mm
- Weight: approx. 11.7 kg
Accessories included:
- turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, power cord, operating instructions
|
ORTOFON TA-210 TONERAM
The Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. TA-210 armtube is a lot less stressed than conventional armtubes due to the Technical rubber and TPE excellent damping properties.
FEATURES:
• TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
• TA-210 has a standard 5-pin DIN connector for tonearm cable
• The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
• Counterweight with Inner/outer scale
- Inner scale to be applied with main counterweight
- Outer scale to be applied when extra mass ring is added
• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
• TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
• Extra mass ring, weight 45 g, for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
TECHNICAL DATA:
• Effective mass without headshell: 5 g
• Effective armlength (distance between the stylus and pivot point): 329.0 mm
• Mounting distance (distance between the pivot point and turntable center): 316.6 mm
• Offset angle: 16.5 degrees
• Overhang: 12.4 mm
• Tracking force adjusting range (direct reading): 0-3/0-4 g
• Height adjustment range: 35-55 mm
• Diameter of the armbase mounting hole: 19-20 mm
• Diameter of the center shaft of tonearm: 18.0 mm
• Inner null point: 66 mm
• Outer null point: 120.9 mm
• Counterweight for cartridge + headshell mass between 21 and 28g included
• Headshell LH-2000E included
• Headshell weight: 15.5 g
• TA-210 total weight including headshell: 536 g
• Set of tonearm cables 6NX-TSW-1010 included
| AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Convert records to digital files via the USB output
- Professional anti-resonance, die-cast aluminium platter with felt mat
Cartridge & Stylus |
Replacement Stylus |
VM95 Series |
Turntable |
Type |
fully manual |
Motor |
DC servo-controlled |
Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
Pitch Variation |
+/-8% or +/-16% |
Turntable Platter |
Die-cast aluminum |
Starting Torque |
>1.0 kgf.cm |
Braking System |
Electronic brake |
Wow and Flutter |
50 dB |
Output Level |
Pre-amp "PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
USB Function |
PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above |
Power Supply Requirements |
115/230V AC, 60/50 Hz |
Power Consumption |
2.75 W |
Dimensions |
141,6 x 452 x 352 (H x W x D mm) |
Weight |
8.0kg |
Accessories Included |
AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2\') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter |
|
|
Reviews
There are no reviews yet.