| Content | User-friendly control layout
High-torque direct drive system
Designed for optimal sound quality
Tempo control with variable width levels
Detachable power and audio cables
MAIN SPECIFICATIONS
Power Requirements AC 110-120V/220-240V, 50 Hz/60Hz
Power Consumption 9W
Output RCA x 1
Main Unit Weight 28.88 lbs.
Maximum Dimensions 17.83” (W) x 6.25” (H) x 13.89” (D)
TURNTABLE
Drive Method Quartz lock serve type direct drive
Wow and Flutter 0.1% or less WRMS (JIS WTD)
Motor 3-phase brushless DC motor
S/N Ratio 70dB (DIN-B)
Braking System Electronic brake
Turntable Aluminum die-casting diameter: 13.07”
Rotation Speed 33-1/3rpm, 45rpm
Starting Torque 4.5kg-cm or more
Rotation Speed Adjustment Range ±8%, ±16%, ±50%
Start Time 0.3 seconds (at 33 1/3rpm)
TONE ARM
Arm Type Universal type S-shape tone arm, gimbal-supported type bearing structure, static type balance
Tracking Error Within 3º
Effective Length 9.05”
Arm Height Adjustment Range 0.23”
Overhang 0.59”
Stylus Pressure Variable Range 0oz to 0.14oz (1 scale 0, 0.03oz)
Proper Cartridge Weight Single cartridge: 0.12oz to 0.45oz (When shell weight is used: 0.12oz to 0.22oz)
When only balanced weight is used: 0.21oz to 0.35oz (When sub weight is used: 0.33 to 0.45oz) |
ORTOFON TA-210 TONERAM
The Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. TA-210 armtube is a lot less stressed than conventional armtubes due to the Technical rubber and TPE excellent damping properties.
FEATURES:
• TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
• TA-210 has a standard 5-pin DIN connector for tonearm cable
• The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
• Counterweight with Inner/outer scale
- Inner scale to be applied with main counterweight
- Outer scale to be applied when extra mass ring is added
• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
• TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
• Extra mass ring, weight 45 g, for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
TECHNICAL DATA:
• Effective mass without headshell: 5 g
• Effective armlength (distance between the stylus and pivot point): 329.0 mm
• Mounting distance (distance between the pivot point and turntable center): 316.6 mm
• Offset angle: 16.5 degrees
• Overhang: 12.4 mm
• Tracking force adjusting range (direct reading): 0-3/0-4 g
• Height adjustment range: 35-55 mm
• Diameter of the armbase mounting hole: 19-20 mm
• Diameter of the center shaft of tonearm: 18.0 mm
• Inner null point: 66 mm
• Outer null point: 120.9 mm
• Counterweight for cartridge + headshell mass between 21 and 28g included
• Headshell LH-2000E included
• Headshell weight: 15.5 g
• TA-210 total weight including headshell: 536 g
• Set of tonearm cables 6NX-TSW-1010 included
| AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Convert records to digital files via the USB output
- Professional anti-resonance, die-cast aluminium platter with felt mat
| Cartridge & Stylus |
| Replacement Stylus |
VM95 Series |
| Turntable |
| Type |
fully manual |
| Motor |
DC servo-controlled |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.0 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
2.75 W |
| Dimensions |
141,6 x 452 x 352 (H x W x D mm) |
| Weight |
8.0kg |
| Accessories Included |
AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2\') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter |
| Η νέα έκδοση του θρυλικού πικάπ της Technics!
The Technics SL-1200MK7 raises the bar for direct-drive DJ turntables. It brings new digital technology to Technics\' classic SL1200 Series design. The SL-1200MK7 turntable features a new coreless motor for improved performance. It keeps the same style and feel that made the 1200 Series popular with professional DJs. The MK7 looks almost identical to previous models, the MK5 and MK6, but with a slightly more refined all-black design.
Its recessed gold-plated phono terminals help prevent damaging the outputs after you\'ve detached the RCA cables. Its redesigned digital motor control enhances performance. The SL-1200MK7\'s starting torque and brake speed can be customized to suit your style. Its reverse function play lets you expand your creativity, while its digital pitch control delivers improved tracking and accuracy. The Technics SL-1200MK7 is no ordinary record player. It is aimed squarely at professional DJs.
The SL-1200MK7 has rock-solid build quality and feel. Weighing in at 9.6 Kg , this pro-grade record player features a chassis whose top plate is cast from aluminum. The bottom half is molded from robust ABS and fiberglass. The result is maximum stability and vibration damping.
Technics\' pedigree in the world of direct-drive turntables is undeniable. It released the world\'s first direct-drive turntable in 1970. The SL-1200 turntable became a favorite of early hip-hop DJs. They took advantage of its quick start-up time and high-torque motor to perfect scratching and other turntablism moves. The Technics SL-1200 turntable became a fixture in virtually every DJ booth and recording studio around the world.
The Technics SL-1200MK7 offers high performance for demanding DJs. It aims to live up to the reputation for reliability you\'ve come to expect from Technics over the past four decades.
- new 2019 model of Technics legendary SL-1200 series DJ turntable, which has been out of production since 2010
- NOT OEM: all original design + new parts were cast for this turntable by Technics
- inherits the familiar look, feel, and functionality of previous SL-1200 models
- newly designed coreless direct drive motor for higher torque, super-stable rotation
- plays at 33 ⅓ / 45 / 78 RPM w/ ±8%/±16% pitch adjustment
- detachable RCA + power cord
- improved vibration damping platter w/ iconic side strobe dots
- precision S-shaped tonearm w/ Technics headshell (cartridge not included)
- single colorway, all matte black finish
TECH SPECS
- drive method: direct drive
- turntable speeds: 33 1/3, 45 RPM (with switch 78 rpm)
- starting torque: 0.18mm / 1.8kg･cm (1.56 lbs)
- adjustable starting torque + breaking speed
- new reverse play function
- wow + flutter: 0.025% W.R.M.S.
- turntable platter: aluminum die-cast / diameter: 332mm (13 5/64“)
- tonearm type: S-shaped universal, static balance
- effective length: 230mm (9 1/16“)
- overhang: 15mm (19/32“)
- headshell weight: ~7.6g
- dimensions: 17-27/32 × 6-21/32 × 13-29/32" / 453 x 169 x 353mm
- weight: 21.21 lbs / 9.6kg
COMES WITH
- Technics slipmat + slipsheet
- dustcover
- 45 adaptor
- screw set for cartridge
- RCA cable
- grounding cable
- power cord
| Turntable:
- Type: direct-drive turntable
- Drive: quartz driven upper-torque direct drive
- Motor: 16-pole, 3-phase, brushless motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
- Starting torque: 2.8 - 4.5 kg/cm (adjustable)
- Adjustable stop time (0.2 - 6 sec.)
- Start-up time / change to RPM: < 0.2 sec
- Wow and flutter: 0.01% WRMS*
- S/N ratio: > 55 dB (DIN-B)
- Brake system: electronic brake
Platter:
- Material: die cast aluminium
- Diameter: 332 mm
- Weight: approx.1.5 kg
Tone arm:
- Type: universal, static balanced, S-shaped
- Effective length: 230 mm
- Overhang: 15 mm
- Tracking error range: < 3°
- Offset Angle: 22°
- Stylus Pressure: 0 - 4 g
- VTA setting range: 0 - 6 mm
- Usable weight of pick-ups: 3.5 ~ 8.5 g (incl. headshell 13 ~ 18 g)
- Anti-skating range: 0 - 3 g
- Effective tone arm mass: 30 g
- 1x PHONO/1x LINE out (gold-plated), 1x GND earth connection, 1x USB port (type B)
- Accessories included: Turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions
- Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
- Power consumption: 17 W
- Dimensions (WDH): 458 x 354 x 144,6 mm
- Weight: approx. 11.4 kg
| Fusing Technics’ traditional analogue and leading-edge digital technologies
Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1200GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1200GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records.
Coreless Direct Drive Motor
In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement.
And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging,” which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging.
High-precision Motor Control
The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at a constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1200GR achieves maximum performance.
Two-Layer Platter Construction
The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.
Precision Tonearm
The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent lightweight and rigidity for the material of the tonearm pipe.
With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.
High-Rigidity Body
The SL-1200GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1200GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1200GR.
- Type: Direct Drive Manual Turntable
- Turntable Speeds: 33-1/3, 45 and 78 r/min
- Adjust Range: ±8 %, ±16 %
- Starting Torque: 2.2 kg-cm
- Build-up Characteristics: 0.7 s. from Standstill to 33-1/3 r/min
- Wow And Flutter: 0.025 % W.R.M.S.
- Rumble: 78 dB (IEC 98A weighted)
- Turntable Platter: Aluminium diecast
- Diameter: 332 mm
- Weight: Approx. 2.5 kg (Including rubber sheet)
- Tonearm Section
- Type: Universal Static Balance
- Effective Length: 230 mm (9-1/16″)
- Overhang: 15 mm (19/32″)
- Tracking Error Angle: Within 2° 32′ (at the outer groove of 30 cm record), Within 0° 32′ (at the inner groove of 30 cm record)
- Offset Angle: 22°
- Arm-height Adjustment Range: 0 – 6 mm
- Stylus Pressure Adjustment Range: 0 – 4 g (Direct Reading)
- Head Shell Weight: Approx. 7.6 g
- General
- Power Consumption: 11 W Approx., 0.2 W (Standby)
- Dimensions (WxHxD): 453 x 173 x 372 mm
- Weight: Approx. 11.5 kg
|
Reviews
There are no reviews yet.