Based on the award winning BlueMax compressor design, the COMP16 is the simplest professional quality compressor in the world. Sixteen presets have been carefully tailored for a wide range of applications including vocals, percussion, fretted instruments, keyboards, stereo program material and compression effects. Simply select the preset and adjust the input and output to desired […]
Based on the award winning BlueMax compressor design, the COMP16 is the
simplest professional quality compressor in the world. Sixteen presets have been
carefully tailored for a wide range of applications including vocals, percussion,
fretted instruments, keyboards, stereo program material and compression effects.
Simply select the preset and adjust the input and output to desired level of compression.
Finally a great-sounding compressor that anyone can use!
Features
? Easy to Use 16 Presets
? Award-Winning Compressor Design
? Ultra Low Noise
? Back-Lit VU for Metering Compression
? Bypass Switch to Audition Compression
? Balanced XLR and Unbalanced ?? I/O
? Musical / Wide Dynamic Range Compression
? Great for Recording or Live Sound
? Great for Guitars and Basses
Technical Specifications
Input
XLR Impedance 10k Ohms
TRS Impedance 10k Ohm
Panel Controls
Input -20dB to +20dB
Output -20dB to +20dB
Bypass
Output to Meter
Preset Select Digital Encoder
Meters Blue Backlit VU
Power Supply
Type Linear
Input 16VAC/1000mA
Output
XLR Balanced 51 Ohms Impedance
1/4? TRS Unbalanced 51 Ohms Impedance
Performance
THD+Noise (Unweighted) 0.006% at 0dB
Noise Floor -98dB
Signal To Noise >95dB
Power Supply Rejection >98dB
Physical
Weight 5lbs./ 2.30
Dimensions 5.5 x 5.5 x 1.75
Mounting Universal Rack Tray Insert
Chassis Steel
Panel Brushed Aluminum
Sides Cast Aluminum
Power 16 Watts
Weight
4.00 kg
Reviews
There are no reviews yet.
Be the first to review “PRESONUS COMP 16 – PROFESSIONAL AUDIO COMPRESSOR w-PRESET COMPRE” Cancel reply
Based on the award winning BlueMax compressor design, the COMP16 is the
simplest professional quality compressor in the world. Sixteen presets have been
carefully tailored for a wide range of applications including vocals, percussion,
fretted instruments, keyboards, stereo program material and compression effects.
Simply select the preset and adjust the input and output to desired level of compression.
Finally a great-sounding compressor that anyone can use!
Features
? Easy to Use 16 Presets
? Award-Winning Compressor Design
? Ultra Low Noise
? Back-Lit VU for Metering Compression
? Bypass Switch to Audition Compression
? Balanced XLR and Unbalanced ?? I/O
? Musical / Wide Dynamic Range Compression
? Great for Recording or Live Sound
? Great for Guitars and Basses
Technical Specifications
Input
XLR Impedance 10k Ohms
TRS Impedance 10k Ohm
Panel Controls
Input -20dB to +20dB
Output -20dB to +20dB
Bypass
Output to Meter
Preset Select Digital Encoder
Meters Blue Backlit VU
Power Supply
Type Linear
Input 16VAC/1000mA
Output
XLR Balanced 51 Ohms Impedance
1/4? TRS Unbalanced 51 Ohms Impedance
Performance
THD+Noise (Unweighted) 0.006% at 0dB
Noise Floor -98dB
Signal To Noise >95dB
Power Supply Rejection >98dB
Physical
Weight 5lbs./ 2.30
Dimensions 5.5 x 5.5 x 1.75
Mounting Universal Rack Tray Insert
Chassis Steel
Panel Brushed Aluminum
Sides Cast Aluminum
Power 16 Watts
OPTIMOD-FM 5500 puts coveted five-band and two-band OPTIMOD processing into a single rack unit package and brings it to you at the most affordable price ever.
Quality sound is what 5500 is all about-sound that attracts audiences by providing a polished, professional presentation regardless of format and source material. Exceptional versatility allows you to adjust the processor's audio texture to brand your audio, knowing that the resulting signature sound will remain consistent, cut-to-cut and source-to-source. Branding builds businesses and no other processors have the consistency to brand your sound like OPTIMOD.
With the 5500, your signature sound is just a preset away. An easy, one-knob Less/More adjustment allows you to customize any factory preset, trading cleanliness against processing artifacts according to the requirements of your market and competitive environment. Full Control gives you the versatility to customize your audio further. And, if you're a hard-core processing expert, you can explore Advanced Control to tweak presets at the same level as Orban's factory programmers. This versatility makes the 5500 a superb choice for any format. Its five-band processing is ideal for any pop music format (even the most competitive and aggressive CHR), while phase-linear two-band processing yields ultratransparent sound for classical, classic jazz, and fine arts formats. Regardless of your choice, 5500's optimized technology ensures unusually high average modulation and coverage for a given level of subjective quality. Unlike many lesser processors, the 5500 handles speech particularly well. It's always clean, even when you process for loudness.
If you're concerned about latency because you need to feed live talent headphones off air, be assured that the 5500's ultra-low-latency (5 ms delay) processing will keep the most finicky talent happy. Or use optimum latency (15 ms delay) processing for the most competitive sound with delay that's still low enough to satisfy most any talent.
Versatility doesn't stop with sound.
The 5500 can also be used as a superb stand-alone stereo encoder with latency as low as 2 ms and full overshoot limiting in both the left/right and composite baseband domains.
When used in this mode, the 5500 must be driven (usually via an STL) by a full-featured FM audio processor (like Orban's 8600) that incorporates pre-emphasis aware HF limiting and peak control. In both modes, the 5500's stereo encoder helps deliver a transmitted signal that's always immaculately clean and perfectly peak limited, with full spectral protection of subcarriers and RDS/RBDS regardless of the amount of composite limiting.
It is the ideal choice for network broadcasters who process with Orban's flagship OPTIMOD-FM 8600 at the network origination point and who need a processor at every transmitter to eliminate STL overshoots (using the 5500's stand-alone stereo encoder mode) and/or to process local insertions while also eliminating network STL overshoots (using the 5500's audio processor / stereo encoder mode). Moreover, the 5500's two modes make it easy for large government and network broadcasters to manage its inventory of spares because any 5500 can be used as a stereo encoder with or without audio processing.
Available in both modes, the built-in, defeat-able ITU-BS412 multiplex power controller allows the 5500's output to meet even the most stringent European government regulations.
A 10 MHz frequency reference input allows the stereo pilot tone frequency to be locked to GPS or another high-accuracy frequency standard. This improves the performance of single-frequency networks in areas where coverage of the transmitters overlaps.
The 5500's built-in stereo encoder, AES/EBU digital inputs and outputs, and analog I/O permit hasslefree interfacing to any broadcast plant, whether the 5500 is located at the studio or the transmitter. Tight band limiting to 15 kHz means you can use any uncompressed digital STL to pass 5500- processed audio from studio to transmitter without compromising on-air loudness - there's no need to use STL's having 44.1 or 48 kHz sample-rate.
The stereo encoder's stereo sub-channel modulator can operate in normal double sideband mode and in an experimental compatible single sideband mode (SSB/VSB) that is offered to enable users to compare and assess the two modes.
Analog Fallback to Digital control that allows Silence Sense to switch the active input from Analog to Digital if silence is detected in the analog input signal but not on the digital input signal. This function works vice versa as well on both analog and digital AES input. The silence sense parameters apply to both simultaneously and both detectors are available to drive the 5500's tally outputs and sending SNMP Traps/Alerts.
If you want to locate the 5500 away from the studio, you'll be pleased by its three separate remote control ports - GPI contact closures, RS232 serial and built-in Ethernet for TCP/IP networks. The serial and Ethernet ports are supported by the supplied 5500 PC Remote Control application. This Windows® 2000/XP/Vista/7/8 application allows you to do even more with the 5500 than you can do through its front panel, making remote control a pleasure.
5500 PC Remote software allows you to access all 5500 features and allows you to archive and restore presets, automation lists, and system setups (containing I/O levels, digital word lengths, GPI functional assignments, etc.)
Built-in clock-based automation lets you automatically day-part the processing. You can control many other 5500 operating parameters too.
The 5500's feature set fully exploits the processor's DSP and computer-based control architecture. To ensure absolute accuracy, you can automatically synchronize the clock to an Internet timeserver. It has a cool-running, energy-efficient switching power supply and uses the latest dual-core DSP chip technology from Freescale Semiconductor.
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
FEEDBACK DESTROYER FBQ1000
Automatic and Ultra-Fast Feedback Destroyer/Parametric EQ with 24 FBQ Filters
High-performance 2-channel Feedback Destroyer and Parametric EQ
Automatically and "intelligently" locates and destroys up to 24 frequencies
Ultra-narrow FBQ filters for extremely effective feedback suppression, while keeping highest sonic quality
"Set-and-forget" default setting enables immediate and super-easy Feedback Destroyer performance
Auto mode continuously monitors the mix and automatically sets filters
Single-Shot mode automatically detects and destroys feedback plus locks the filter until you reset it manually
Manual mode allows setting of up to 24 fully parametric filters with individual frequency, bandwidth and gain parameters
Extensive MIDI implementation and user preset memories for instant program recalls
Balanced inputs and servo-balanced outputs with ¼'' TRS and gold-plated XLR connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
BEHRINGER FEEDBACK DESTROYER FBQ1000
The DPR-504 is a 4-channel noise gate.
Each channel features: A parametric key filter with key filter listening. Simultaneous key level and threshold metering with average and peak metering. A gate status LED. A RELEASE/HOLD control (hold tracks proportionally with release times). Attack switchable auto/fast (auto tracks signal dynamics for optimum setting). Link (links two channels together). Key source allows external triggers.
The Range switch selects between 7OdB and 2OdB gating depth to provide alternative release profiles. The unit features electronically balanced inputs and outputs.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.