| Content |
Now with 96k sampling rate*, the DigiMAX is the newest member in the award winning
family of Presonus mic preamp's. Combine eight channels of pristine mic preamplification
with 24 simultaneous digital and analog outputs, and the DigiMAX 96k seamlessly fits
into any digital recording situation. The DigiMAX 96k is the perfect front-end for DAW's as
well as adding mic pre's to digital mixers and sound cards.
A MIC PRE WITH HERITAGE
We started with the same design as the MP20, M80 and VXP: Class A Discrete Input Buffers
followed by a dual-servo gain stage giving you 60db of preamp gain with 52db of headroom. The
DigiMAX 96k is electronically balanced and features phase reverse on the first two channels, as
well as a 20dB pad and selectable 48v phantom power on each channel. A unique feature is EQ
Enhance? which contours the EQ curve -4dB centered at 1k from 250Hz to 5kHz. This is especially
helpful on drum overheads and other sources to bring out definition and notch out problem frequencies.
THE COMPRESSOR TRAPPED IN THE BODY OF A LIMITER
What makes a limiter musical? Typically, most limiters use peak detection which actually clips the
signal and can produce nasty artifacts. RMS detection, though commonly used with most compressors,
has the drawback of not being fast enough to catch extremely fast transients. The DigiMAX 96k uses
both RMS and Peak detection to give you the best of both worlds. The DigiMAX 96k uses an RMS style
compressor with a high ratio while the peak portion is used only to protect the input of the A/D converter
from clipping. The end result? Fast, musical, natural and able to catch anything you throw at it.
CONNECTIVITY FOR DAYS
The DigiMAX 96k features more I/O options than any mic pre on the planet! 8 XLR Mic Inputs + 2 1/4"
Instrument Inputs. The outputs consist of 8 balanced TRS analog outputs plus a 24 bit ADAT? lightpipe
output AND (4) stereo RCA SPDIF Digital Ouputs (Unit ships in AES/EBU mode, breakout cable not included).
And here's the best part... They all work simultaneously! The Ultimate Live Recording Preamp! Use the
ADAT? Lightpipe Outputs to feed your recorders digital inputs while you send an identical signal to a FOH
Console via the TRS Analog Outputs. Bye, bye latency! Use the TRS analog outputs to monitor tracks while
you send the Lightpipe to your soundcard or standalone computer interfaces like MOTU 2408 and Digi001.
Mixer Beefer-Upper! Add high gain/low noise quality micpre's to your digital console using either Lightpipe,
AES/EBU, SPDIF, or analog TRS outputs.
* Over AES/EBU or S/PDIF digital output cables ONLY.
Features
? 44.1, 48, 88.2 and 96kHz Sample Rates
? Ultra-Wide Dynamic Range
? Low-Noise Operating Levels
? Dual-Domain Limiter on Every Channel
? EQ Enhance on Every Channel
? -20dB Pad on Every Channel
? 48V Phantom Power on Every Channel
? Instrument Input on Channels One and Two
? Phase Reverse on Channels One and Two
? Eight 24-bit ADC Converters
? ADAT? Lightpipe Output
? S/PDIF Outputs
? AES/EBU Outputs
? 1/4? TRS Balanced Analog Outputs
? BNC Word Clock I/O for Sync
Technical Specifications:
Input
Number of Channels Eight
Input Impedance, XLR Input 1.3k Ohms
Input Impedance, 1/4" Instrument Input 1M Ohms
Connectors
Eight XLR, Two 1/4" Instrument Inputs on Channel One and Two
Panel Controls
Gain 0dB to +40dB
Limiter 0dB to Off
Phase Reverse (Channel One and Two Only) On/Off
EQ Enhance Button On/Off
Meters
Signal Present LED -20dBu
Clip LED +22dBu
Limit LED Limiter Active
Output
1/4" TRS Impedance Balanced 51 Ohms
ADAT? LightPipe Digital Optical 24-bit
AES/EBU (4 Pair, Stereo) 24-bit
S/PDIF (4 Pair, Stereo) 24-bit
Digital
Sampling Rates 44.1, 48, 88.2 and 96kHz
Performance
THD + Noise (Unweighted) 0.009%
Noise Floor -94dBu
Signal to Noise >98dB
Analog Dynamic Range >120dB
Power Supply Rejection >98dB
Amplifier Type Dual Servo
Power Supply
Type Linear, External
Power 80 Watts
Input 100/120/220/240V AC (Factory Configured)
Physical
Size 1U Rack
Dimensions 19" W x 1.75" H x 7" D
Weight 15 lbs./ 6.8 kg
Chassis Steel
Panel Aluminum
|
The OctaMic II provides 8-Channel 192 kHz / 24 bit AD conversion with eight hi-class microphone and line pre-amplification channels, featuring a combination of sophisticated components and approved RME technology.
Lowest distortion, excellent signal to noise ratio and perfectly linear frequency response transmit and amplify the microphone signals truly unchanged.
The OctaMic II includes some significant enhancements compared to the OctaMic:
The balanced TRS inputs of the Neutrik Combo XLR jacks are phantom power-free and can be operated as real line inputs too. The improved design of the input circuits allows for a maximum input level of +21 dBu with a convenient gain range from 6 dB up to 60 dB.
Improved signal to noise ratio (SNR) ADC 107.5 dB
Improved THD, especially at higher gains
Optimised heat dissipation by a new and larger housing with improved convection
Internal wide range power supply with line filter, insensitive to voltage fluctuations
Super-stable, short circuit proof 48 V phantom power
Features
OctaMic II offers 8 balanced XLR mic / line inputs via Neutrik XLR/TRS combo jacks. Each channel contains switches for 48V phantom power, a low cut filter and phase reversal. Amplification can be set between 6 and 60 dB. LEDs for signal, clip, and activated phantom power give a complete overview on the unit's status. When the special Clip Hold mode is activated, any detected clip-state will cause the corresponding LED to flash once per second. With this, the user gets a long-term peak detection, and no longer needs to constantly watch the LEDs. At the same time momentary overloads are still displayed correctly.
Frontside switches include power on/off and output level, for a choice of -10 dBV, +4 dBu or Hi Gain (+19 dBu) as reference level. This unusual feature offers two advantages. First, the reference level can be easily switched to match any of RME's current interface devices, from HDSP 9632 through Multiface up to the renowned ADI-8 series converters. Second, the Signal to Noise ratio is optimized, and the Clip-LED will exactly match the ones of the ADI-8 (2 dB below 0 dBFS).
The balanced line level output signal is available at the back of the unit via 8 stereo TRS jacks. The specially developed, internal hi-performance switch mode power supply lets the OctaMic II operate in the range of 100V to 240V AC. It is short-circuit-proof, has an integrated line-filter, is fully regulated against voltage fluctuations, and suppresses mains interference.
Top
AD-Conversion
The 8-Channel AD-conversion of the OctaMic II operates at up to 192 kHz. The digitized signal is available simultaneously at the double ADAT output (S/MUX, up to 96 kHz), and at a DB-25 connector (4 AES/EBU outputs, up to 192 kHz). The digital part can be clocked internally (master) and externally via word clock, AES/EBU and SPDIF.
RME's outstanding SteadyClock(TM) ensures perfect AD-conversion, as jitter on the external sync-sources is nearly completely removed. All settings are done via DIP-switches on the back of the OctaMic II. Analog outputs and both digital outputs operate fully simultaneously. The choice of reference level affects the analog outputs only, the signal/clip indication and the AD-conversion will react only to the Gain-pots.
Top
Tech Specs
8 balanced XLR/TRS mic/line inputs
54 dB gain range
Input impedance: XLR 2 kOhm, TRS 5 kOhm
Analog input level: from -40 dBu up to +21 dBu
Maximum output level: +21 dBu
Output impedance: 75 Ohm
Output level switchable Hi Gain / +4 dBu / -10 dBV
Signal to noise ratio (SNR): 129 dB EIN @ 150 Ohm
THD:
Large frequency range (200 kHz) with special EMI input filtering
Frequency response -0.5 dB: 5 Hz - 200 kHz
Hi-pass filter: 80 Hz, 18 dB/oct.
Line Out: 1/4" TRS (6.3 mm stereo jack), servo-balanced
Phantom power: +48 Volt switchable per channel
Internal wide range switching power supply 100-240 Volt AC
Unbeatable price/performance ratio!
AD conversion
SNR: >110 dB(A)
Supported sample rates: 28 kHz - 200 kHz
THD:
Sync Sources: AES/EBU (also SPDIF coaxial), wordclock, internal
SteadyClock(TM) ensures best sound quality even with jittery external clocks
Top
Accessories
Digital breakout cable Pro, AES/EBU, D-sub25 to 4x XLR-3 female + 4x XLR-3 male, 1m/3m/6m (ALVA Audio)
Digital D-sub cable, AES/EBU, D-sub25 male to D-Sub25 male, 1m/3m/6m (ALVA Audio)
Optical ADAT Toslink cable 1m/2m/3m/5m/10m (ALVA Audio)
Word Clock cable, 1 x BNC male to 1 x BNC male, 1m/5m/10m (ALVA Audio)
Top
Add-On
BOB-32 Universal Breakout Box with 2 x 8 XLR to 2 D-sub connectors (supports TASCAM and YAMAHA format), flip-frame case
| Highly versatile and portable, Sound Devices' MM-1 is a single-channel, portable microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an "unclippable" dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC.
The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control.
The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.
- Maximum of 66 dB of gain, in eleven discrete steps
- Dynamic range exceeding 120 dB
- 10 Hz to 50 kHz audio bandwidth
- High immunity to RF interference
- High current line output driver
- Transformer-balanced input and output
- Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable“
- Selectable 48-volt / 12-volt phantom power or 12-volt "T" power
- High-pass filter @ 80 or 160 Hz, 6 dB per octave
- Headphone monitoring of microphone audio, monitor audio, or a mix of both
- Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
- Separate level control of Monitor gain and overall headphone gain
- Split ear function via DIP switches
- Internal battery power (two-AA)
- Excellent battery life with alkaline and NiMH rechargeable batteries
- External 5-17 VDC powering (plug included)
- High-strength aluminum chassis with durable belt clip
| • Road proof housing
• High quality components
• Professional balanced XLR outputs
• Level control
The ASC-202 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, has two XLR inputs and stereo RCA outputs. The other side has stereo RCA inputs and two XLR outputs. Each side has stereo level controls. A possible application of the SC-13 is to use it as a level control in balanced audio lines.
The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio solutions are designed to meet the highest stage and audio demands and feature a metal road proof housing with rubber feet and easy accessible controls. The units also have a small footprint which make them ideal to be used and placed in any environment where space is critical.
Specifications Frequency Response: 20Hz-20KHz
Inputs: XLR/Jack Combo, RCA
Outputs: XLR male, RCA
Input sensitivity RCA in: -10 dBv
Input Impedance RCA in: 10 kOhm
Input sensitivity XLR/Jack in: +4 dBu
Input Impedance XLR/Jack in: 20 kOhm
Output voltage RCA Out: -10 dBV
Output Impedance XLR Out: 100 Ohm
Output voltage XLR Out: +4 dBu
Output Impedance XLR Out: 200 Ohm
Power supply: 18V AC (adapter included)
Dimensions: 53 x 158 x 135 mm (HxWxD)
Weight: 0,65 Kg |
The PRE-73 Mk2 pre-amp and the FC3 condenser microphone in one bundle. The bundle also includes Golden Age P1 Pop Filter, Proel RSM180 mic stand and Proel CHL250 5m cable. |
-
- Ultra-high quality 8-channel A/D and D/A interface for virtually any digital recording/mixing environment
- 8 state-of-the-art MIDAS designed Mic Preamplifiers
- Phantom power on all microphone inputs
- Reference-class Cirrus Logic 24-bit converters for ultimate signal integrity
- Processes 48 and 44.1 kHz sample rates
- External sample rate synchronization via word clock or ADAT input
- Optical ADAT in/out interface for ultimate compatibility
- All mic/line inputs routed to the ADAT output
- ADAT input routed to all Line outputs
- “Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
Reviews
There are no reviews yet.