Eris E7 XT
Our best-selling studio monitors just got even better.
With their smooth, accurate frequency response; powerful amplification with tons of headroom; and acoustic tuning functions that ensure you always get the best sound, it's no wonder that Eris®-series studio monitors have been a runaway hit since their introduction. The Eris E7 XT builds on the Eris XT series, adding big, controlled bass in a compact form that will fit into a studio of nearly any size. Deep lows and a wide, more controlled sweet spot (thanks to its EBM waveguide design) mean that our best-selling studio monitors just got even better.
Studio speakers with a wide sweet spot.
We outfitted the Eris XT studio monitors with a new EBM (Elliptical Boundary Modeled) waveguide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot that's ideal for group listening and collaboration. Narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Bass that’s just right.
The familiar woven composite low-frequency driver offers Eris' signature tight, clear bass, with plenty of punch and no flab. Eris E7 XT studio monitors sport a ported enclosure that is designed to maximize bass in a compact cabinet, allowing them to reach down to an astonishing 42 Hz—with no subwoofer!
Set up your studio monitors for your room.
Modern recording studios can be anywhere from a spare bedroom to a multi-million dollar facility. That's why every studio monitor we make is equipped with controls that ensure the flattest response in your mix environment. Acoustic tuning controls allow you to configure the Eris E7 XT perfectly for your room: You get Low-cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.
Studio monitor connections.
It’s easy to feed audio to your Eris E7 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E7 XT monitors provide balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs. You’ll have no problem hooking your Eris speakers up to virtually anything.
Suitable for both home recording studios and professional mix engineering, Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you've come to expect from PreSonus®. It’s Eris remastered.
Active Studio Monitor
- Equipped with a 6.5" woofer and a 1.25" silk-dome tweeter
- Frequency response: 42 - 22,000 Hz
- Crossover frequency: 2.5 kHz
- Gain control
- MF Control - Bell EQ, 1 kHz, +/- 6 dB
- HF Control: Shelving filter, 10 kHz, +/- 6 dB
- Low cut switchable at 80 or 100 Hz
- Acoustic space switch: -2 dB, -4 dB
- LF Amplifier power: 70 W
- HF Amplifier power: 60 W
- Max. SPL (sound pressure level): 104 dB (continuous operation)
- Input: XLR and jack (balanced), and RCA (unbalanced)
- 100° (H) x 60° (V) EBM Waveguide
- Turn-on delay
- Output current limiting
- Overheating-, transient-, and subsonic protection circuits
- Dimensions: (W x D x H) 240 x 242 x 365 mm
- Weight: 8.4 kg
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
|Frequency response : ||40Hz - 40kHz |
|Maximum SPL : ||113dB SPL (peak @ 1m) |
Type/Impedance: symmetrical/10 kOhms
Sensitivity: Adjustable, +4dBu or -10dBV
|Bass/mid-range : ||150W rms, BASH® technology |
|Treble : ||100W rms, AB class |
Electric supply :
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
Visualization and control :
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
|warning light : ||Power on LED |
Electric supply :
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
|Woofer : ||6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker |
|Tweeter : ||Focal TB871 Beryllium inverted dome tweeter |
|transducer shielding : ||Integral through cancellation magnets or by magnet design |
|Box : ||7-1/2" (19mm) MDF panels |
Dark red natural veneering side panels, black body
|Dimensions (HxWxD) : ||13 x 9-7/16 x 11-7/16 " (330x240x290mm) |
|Weight : ||24.2lb (11kg)|
PRICE PER UNIT
ADAMs A7 & A7X: the evolution of a legend
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldÊ¼s largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The Ê½XÊ¼ stands for Ê½eXtended frequency responseÊ¼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (Â± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
|Basket Ø||7" (175 mm) |
|Voice coil Ø||1.5" (38 mm) |
|Cone material||Carbon/Rohacell/Glass Fiber |
|Diaphragm area||4 inchÂ² (2420 mmÂ²) |
|Equiv. Diaphragm Ø||2" (56 mm) |
|Velocity transform ratio||4:1 |
|Diaphragm weight||0.17 g |
|Built-in Amplifiers|| |
|Amp. power RMS / music||100 W / 150 W |
|Amp. power RMS / music||50 W / 75 W |
|Control panel|| |
|Input Sensitivity||-∞ to +14 dB |
|High Shelf EQ > 5 kHz||Â±6 dB |
|Low Shelf EQ ||Â±6 dB |
|Tweeter gain||Â±4 dB |
|Input connectors|| |
|Analog||XLR / RCA |
|General data|| |
|Frequency response||42 Hz - 50 kHz |
|THD 90dB/1m > 100 Hz||≤0.5 % |
|Long term output||≥106 dB |
|Max. peak||≥114 dB |
|Crossover frequencies||2500 Hz |
|Input impedance||30 KOhm |
|Weight||20.3 lb (9,2 kg) |
|Magnetically shielded||No |
|Height x Width x Depth||13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) |
|Warranty||5 Years |
|Delivery contents |
Power cord, Manual
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
|Acoustical Specifications |
|Frequency Response -3 dB:||40 Hz||÷ 20 kHz|
|Max SPL:||114 dB|| |
|Horizontal coverage angle:||110°|| |
|Vertical coverage angle:||70°|| |
|Compression Driver:||1" neo, metal dome|| |
|Woofer:||6.5" neo, ICC technology|| |
|INPUT/OUTPUT SECTION |
|Input connectors:||combo XLR/Jack|| |
|Input sensitivity:||-6/+6 dBu|| |
|PROCESSOR SECTION |
|Crossover frequencies:||1900 Hz|| |
|Protections:||thermal, excurs., rms|| |
|Limiter:||soft limiter|| |
|Controls:||bass tilt, roll-off, treeble tilt, desktop, DSP controlled|| |
|AMPLIFIER SPECIFICATIONS |
|High frequencies:||100 Watts|| |
|Low frequencies:||200 Watts|| |
|Cabinet Material:||die cast aluminum|| |
|Hardware:||orientation adjustable stand|| |
|PHYSICAL SPECIFICATIONS |
|Height:||370/14.5 mm/inch|| |
|Width:||265/10.4 mm/inch|| |
|Depth:||250/9.8 mm/inch|| |
|Net Weight:||10.5/23 Kg/Lbs|
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
|Frequency response (+/-3dB) : ||55Hz - 28kHz |
|Maximum SPL : ||107dB SPL (peak @ 1m) |
Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA
|HF amplifier stage : ||50W RMS, class AB |
|LF amplifier stage : ||80W RMS, class AB |
Electric supply :
Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord
- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
|Woofer : ||5" Focal drive unit, Polyglass cone |
|Tweeter : ||Aluminum/Magnesium inverted dome Focal tweeter |
|Shielding : ||Integral by cancellation magnet |
|Construction : ||Reinforced and damped Aluminum cabinet |
Black powder cabinet
|Dimensions with spikes : ||289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“) |
|Dimensions with table stand : ||299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“) |
|Net weight : ||7.7kg - (17lb)|