PRESONUS FIRESTUDIO 8IN FIREWIRE RECORDING INTERFACE

• High-speed FireWire (IEEE 1394) audio interface
• 24-bit resolution, up to 96K sampling rate
• 26 simultaneous inputs and outputs
• 8 Class A microphone preamps w/ trim control
• 8 analog line Inputs, 2 Instrument Inputs
• 16 channels of optical ADAT I/O (8 ch. via 96k dual SMUX)
• S/PDIF I/O, MIDI I/O
• DICE II Chipset - ultra efficient data transfer
• JetPLL™ – jitter elimination technology
• Zero latency DSP full-matrix mixer/router
• PreSonus ProPak Complete Audio Software Suite with Cubase LE, Reason Adapted, Amplitube LE, BFD Lite, Drumagog LE and more

Computer system requirements:
Below are the minimum computer system requirements for your FIRESTUDIO.

• OS: Microsoft Windows XP SP1
• Computer: Windows compatible computer with FireWire port.
• CPU/Clock: Pentium, Celeron with 1.6Ghz or higher
• Memory(RAM): 512 MB (1 GB recommended)

• OS: MacOS X 10.4.x or later
• Computer: Apple Macintosh series with on-board FireWire port.
• CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
• Memory(RAM): 512 MB (1 GB recommended)

The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

nio 2 | 4 is a 2 In / 4 Out mobile USB interface for the modern music maker. Nio 2 | 4 features Novationʼs unique ʽDirect FXʼ technology, placing a powerful multi-effects engine within nio 2 | 4ʼs custom drivers. These effects rest close to the core of your computer, working independently of other software and providing powerful ultra-low latency effects for hassle-free, real time jamming and recording. This same unique environment ensures rock-solid, lightning-fast performance, making it the ideal interface solution for home recording, live performing and DJʼing alike; one size fits all. With two headphones outputs, itʼs also an ideal solution for the classroom environment.

• 1 XLR (with phantom power)
• 1 TS Jack
• 2 RCA Phono
• Two inputs simultaneously only - either stereo RCA phono or the XLR and Jack

• 4 RCA Phono
• 2 stereo 1/4" Headphones Jacks

• 44.1/48kHz sample rate
• 24-bit resolution

• Data ports: 1 x USB 1.1

• MIDI i/o

• Operating system: Mac OSX 10.3.9 or greater (Leopard also supported) or Windows XP with Service Pack 2 or greater (Vista 32/64 also supported)
• Minimum Computer spec: Mac - G3/600MHz or G4/667MHz, both with 256MB RAM or PC - Pentium 3/500MHz/256MB RAM (machines running Vista will require a higher spec)
  
  Interfacing: USB 1.1 compatible USB connector (also compatible with USB 2.0), 28/24 awg USB cable recommended

• 633g
• 45.4mm (H) x 144mm (W) x 149mm (D)

The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.

    * 6-in/6-out 24-bit/96kHz simultaneous performance
    * 4-in/4-out 24-bit/192kHz simultaneous performance
    * 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
    * +4 dB balanced input and output
    * S/PDIF optical input & output ports with Sync LED indicator
    * MIDI in/out ports
    * Built-in analog limiter and indicator
    * FireWire bus powered
    * AC adaptor included
    * Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
    * Zero-latency Direct Monitoring
    * 6-pin and 4-pin IEEE1394 ports
    * Compact, solid-metal construction

The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.

The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.

The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.

After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.