The GTX44 raises the bar in professional four channel noisegate/expanders. Packed with pro features including variable threshold, attack, release, hold, range, ratio the GTX44 can be used as a noisegate or downward expander. A special “Duck” mode allows for ducking via Gate Sidechain input. Also includes High and Lo-Pass filters with Sidechain monitoring for flawless […]
The GTX44 raises the bar in professional four channel noisegate/expanders. Packed with pro features including variable threshold, attack, release, hold, range, ratio the GTX44 can be used as a noisegate or downward expander. A special “Duck” mode allows for ducking via Gate Sidechain input. Also includes High and Lo-Pass filters with Sidechain monitoring for flawless isolation of instruments. Adjacent channels are stereo linkable. XLR balanced I/O and single TRS unbalanced I/O. Gate Key/Sidechain jack on every channel. 1U Rack.
Features ? Ultra-Tweakable Gate/Expander ? Isolate Instruments using Frequency Dependent Hi and Lo-Pass Filters and Sidechain Monitor ? Most Parameters Per Channel: Variable Attack, Release, Hold, Ratio, Range and Threshold ? “Duck” Mode Allows for External Input of Microphone Signal via Gate Key Input ? Most flexible Inputs/Outputs: Balanced XLR, Unbalanced 1/4″ via single TRS jack, 1/4″ TRS Gate Sidechain/Key Input ? 10 Segment LED for Gain Reduction
Technical Specifications Input XLR 10K Ohms (Balanced) 1/4″ TRS 10K Ohms (Unbalanced) Ring or Tip Based on Flip Switch Output XLR 51 Ohms (Balanced) 1/4″ TRS 51 Ohms (Unbalanced) Ring or Tip Based on Flip Switch Insert/Sidechain (+4/-10 Based on Switch) Tip = Return 10K Ohms (Unbalanced) Ring = Send 51 Ohms (Unbalanced) Sleeve = Ground Panel Controls Low-Cut Filter 20Hz-8kHz Hi-Cut Filter 250Hz-20kHz Threshold +15dBu to -40dBu Ratio 1:1 to Gate Range 0dB to -80dB Attack .01mS to 500mS Hold .001S to 1S Release .01S to 2S Sidechain Monitor Switch Link 1-2 and 3-4 Switch Duck Switch Bypass Switch Performance THD + Noise 0.01% (0dBu output) Signal To Noise >90dB Gain Reduction Meters LED -3dB to-30dB Power Supply Type Internal Linear Input 100/120/220/240V AC (Factory Configured) Power 24 Watts Physical Weight 10lbs./ 4.5 kg. Dimensions 19″ W x 7″ H x 1.75″ D Chassis Steel Panel Painted Aluminum
Weight
4.50 kg
Reviews
There are no reviews yet.
Be the first to review “PRESONUS GTX-44- FOUR -CHANNEL NOISE GATE-EXPANDER” Cancel reply
The GTX44 raises the bar in professional four channel noisegate/expanders. Packed with pro features including variable threshold, attack, release, hold, range, ratio the GTX44 can be used as a noisegate or downward expander. A special "Duck" mode allows for ducking via Gate Sidechain input. Also includes High and Lo-Pass filters with Sidechain monitoring for flawless isolation of instruments. Adjacent channels are stereo linkable. XLR balanced I/O and single TRS unbalanced I/O. Gate Key/Sidechain jack on every channel. 1U Rack.
Features ? Ultra-Tweakable Gate/Expander ? Isolate Instruments using Frequency Dependent Hi and Lo-Pass Filters and Sidechain Monitor ? Most Parameters Per Channel: Variable Attack, Release, Hold, Ratio, Range and Threshold ? "Duck" Mode Allows for External Input of Microphone Signal via Gate Key Input ? Most flexible Inputs/Outputs: Balanced XLR, Unbalanced 1/4" via single TRS jack, 1/4" TRS Gate Sidechain/Key Input ? 10 Segment LED for Gain Reduction
Technical Specifications Input XLR 10K Ohms (Balanced) 1/4" TRS 10K Ohms (Unbalanced) Ring or Tip Based on Flip Switch Output XLR 51 Ohms (Balanced) 1/4" TRS 51 Ohms (Unbalanced) Ring or Tip Based on Flip Switch Insert/Sidechain (+4/-10 Based on Switch) Tip = Return 10K Ohms (Unbalanced) Ring = Send 51 Ohms (Unbalanced) Sleeve = Ground Panel Controls Low-Cut Filter 20Hz-8kHz Hi-Cut Filter 250Hz-20kHz Threshold +15dBu to -40dBu Ratio 1:1 to Gate Range 0dB to -80dB Attack .01mS to 500mS Hold .001S to 1S Release .01S to 2S Sidechain Monitor Switch Link 1-2 and 3-4 Switch Duck Switch Bypass Switch Performance THD + Noise 0.01% (0dBu output) Signal To Noise >90dB Gain Reduction Meters LED -3dB to-30dB Power Supply Type Internal Linear Input 100/120/220/240V AC (Factory Configured) Power 24 Watts Physical Weight 10lbs./ 4.5 kg. Dimensions 19" W x 7" H x 1.75" D Chassis Steel Panel Painted Aluminum
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
In today's recording and sound reinforcement environments, the need for multiple channels of high quality, easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound.
The 1046 provides 4 channels of smooth classic dbx OverEasy® or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
All four channels have the following controls:
Threshold - allows you to set the level at which the compressor starts affecting the gain
OverEasy - allows you to select between soft compression for overall gain control or Hard Knee compression based on the characteristics of the original dbx 160.
Ratio - allows you to set the slope of gain reduction affecting the signal over the threshold level.
Input/Output Meter - allows you to set the meter to check the input and output levels for maximum signal-to-noise ratio and best level matching.
Output Gain - allows you to add make-up gain or to adjust the output level for that channel to match the next device's input gain.
Bypass - hard wire bypass allows you to hear how the compressor is affecting your signal.
PeakStopPlus - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion.
Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression.
All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device.
So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you.
Four independent channels of operation, stereo linkable in two pairs
PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
Independent Threshold and ratio controls
Switchable OverEasy® or Hard Knee compression
Classic dbx® compression
Differentially balanced gold-plated XLR and 1/4" inputs and outputs
True RMS level detection
Precision metering of input level, output level, and gain reduction
Dual True stereo or quad mono operation
Switchable +4dBu or -10dBV operation per channel
Input Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input
> +22 dBu balanced or unbalanced
CMRR
Typically >50 dB at 1 kHz
Output Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type
Servo-balanced/unbalanced, RF filtered
Output Impedance
Balanced 30 Ohm, unbalanced 15 Ohm
Max Output
> +22 dBm balanced, > +20 dBm unbalanced
Bandwidth
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response
0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range
> 118 dB, unweighted
THD+Noise
>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling
True RMS Power Summing
Compressor Threshold Range
-40 dBu to +20 dBu
Compressor Ratio
1:1 to infinity:1
Compressor Threshold Characteristic
Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic
AutoDynamic™
Compressor Attack Time
Program-dependent
Compressor Release Time
Program-dependent
Compressor Output Gain
-20 to +20 dB
Limiter Threshold Range
0 dBu to +24 dBu (off)
Limiter Ratio
infinity:1
Limiter Type
PeakStopPlus® two-stage limiter
Limiter Stage 1
PeakStop® brickwall limiter
Limiter Stage 1 Attack Time
Zero
Limiter Stage 1 Release Time
Zero
Limiter Stage 2
Predictive intelligent program limiter
Limiter Stage 2 Attack Time
Program-dependent
Limiter Stage 2 Release Time
Program-dependent
OverEasy® Switch
Activates the OverEasy compression function
I/O Meter Switch
Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch
Activates the direct input-to-output hard-wire bypass
Operating Level Switch
(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch
Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator
1 LED to indicate PeakStop™ limiting
Function Switches
LED indicator for each front-panel switch
Output Transformer Options
Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage
Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption
20 Watts
Fuse
100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector
IEC receptacle
Dimensions
1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm)
Unit Weight
5.2 lbs. (2.4 kg)
Shipping Weight
7.6 lbs. (3.5 kg)
The Multicom Pro-XL MDX4600 gives you 4 channels of first-class dynamic
control in a single rack space. With a multitude of new features like the
advanced program-adaptive expander gate, extensive metering plus a variety
of configuration options, the Multicom Pro-XL puts a lot of dynamic processing
power in your rack.
Features
Switchable IKA (Interactive Knee Adaptation) program-adaptive compression
circuitry combines the advantages of hard-knee and soft-knee characteristics
IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible noise
suppression
Switchable dynamic enhancer for brilliant, lively audio even with heavy compression
IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program
limiter for reliable and inaudible protection against signal peaks
Switchable low contour filter prevents "pumping" due to low-frequency dominated
compression
Stereo couple function selectable for channels 1/2 and 3/4
Ultra low-noise 4580 operational amplifiers and state-of-the-art THAT¬ VCA's
Separate 8-segment LED meters for input/output levels and gain reduction
Selectable operating level (+4 dBu/-10 dBV)
High-quality detented ALPS¬ potentiometers and illuminated switches
Servo-balanced inputs and outputs with ? in. TRS and gold-plated XLR
connectors
Manufactured under ISO9000 certified management system
Features Four Independent Compressor Channels Channels 1 and 2, 3 and 4 are stereo linkable 7 LED Gain Reduction metering Balanced XLR Inputs and Outputs Sidechain Insert points Intuitive, user friendly layout Flawless performance
The sheer amount of effects and signal processors necessary for today's standards of audio production puts a great strain on the available space in equipment racks, both in the studio and on the road.So, ARX would like to introduce the ARX Quadcomp. An all-new upgrade of the classic award-winning ARX Quadcomp?, the very first four channel 1 RU compressor.You?ll notice that we haven?t strayed very far from our original design concept. The Quadcomp is still four variable ratio Compressor/ Limiters neatly housed in a compact all steel 1 RU package. However, all new low noise/low distortion circuitry, better metering plus XLR inputs and outputs put the Quadcomp in a class of its own. More Control, Less Space On the front panel, each channel has the 'industry standard' individual controls for Threshold, Compression Ratio and Output, plus a new 7 LED Gain Reduction display for accurate visual indication of the amount of gain reduction being applied to the program, and an IN/OUT hardwire bypass switch.In addition to this, each channel has a blank numbered panel to write on for easy confirmation of compressor assigns. Precision Circuitry Internally, each compressor uses Class A VCAs and true 2 pole averaging RMS/DC converters for low distortion and accuracy, plus program dependent attack and release time, which automatically determines optimum compressor response. Balanced Inputs and Outputs The rear panel has true differential Balanced XLR Inputs and Outputs for each compressor. Each compressor has a TRS jack Sidechain access insert point, for frequency sensitive compression, De-essing, etc. in conjunction with an external equalizer (such as the ARX EQ260). Compressor pairs 1 and 2, 3 and 4 also have rear panel mounted Stereo Link switches for accurate stereo tracking. When switched IN, the first channel becomes the master and controls all the functions of the second except Output gain. Universal AC Power AC power range is switchable 100 to 120V, or 220 to 240V, and is connected to the unit via a standard IEC connector, with built-in fuse and voltage switch. Whatever the application ? Channel insert, Bus insert, Master Outputs, Monitor outputs, Crossover outputs, the Quadcomp II?s unique High Density design, precision Low Noise circuitry and clean uncluttered layout make it a truly useful audio tool for all applications.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 20dB CMRR >50dB, 20 Hz?20 KHz Output Impedance Balanced 300 ohms Unbalanced 150 ohms Output Level (Max) + 20 dB Frequency Response 20Hz-20KHz ±0.5dB Signal to Noise ratio -93 dB Unweighted, -98 dB ?A? weighted Distortion .015% THD @ 0dB,1KHz Dynamic Range 108 dB Attack and Release Times Program dependent Metering 7 LED display: ?1, 2, 3, 6, 12, 18, ?24 dB Sidechain Insert Impedance 10 Kohm Power Requirements 100/120 V AC or 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input Connector type Balanced XLR Output Connector type Balanced XLR Sidechain Insert Connector TRS Jack
Front Panel Controls Hardwire bypass IN/OUT switch Threshold, Ratio and Output Gain controls 7 LED Gain Reduction display Marker panel for labelling compressor assigns Stereo link status LEDs Rear Panel Connectors Input and Output balanced XLR connectors TipRingSleeve Sidechain insert connectors Channels 1 and 2, 3 and 4 Stereo link switches IEC AC mains connector with inbuilt fuse and voltage change
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.