PROEL AMP 120XL Mixer amplifier 120W

No longer available!

394.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: H06PR00036 Category:
120W AMPLIFIER AMP Proel amplifiers series have been designed for mixing and microphone announcement diffusion in PA applications. Main features – Protection circuit for the speakers against overload and short circuit – Led Power indicator – Led level indicator – Main volume control – Separate volume control for inputs from 1 to 5 – Low […]

 

Read more

120W AMPLIFIER AMP Proel amplifiers series have been designed for mixing and microphone announcement diffusion in PA applications. Main features – Protection circuit for the speakers against overload and short circuit – Led Power indicator – Led level indicator – Main volume control – Separate volume control for inputs from 1 to 5 – Low and high tone control – Ground connection screw – Four mic/line microphone with XLR (Phantom24V).

Three AUX inputs rear switchable – Main in/out function – Four outputs amongst which one at 4 ohm constant impedance and the other three at constant voltage (25/50/100V) – TAPE OUT output on RCA – Power switch selector 230V/117Vca – 24Vdc emergency power supply – Supplied by Proel with brackets for rack mounting purposes – Brackets code: 95RMAMPV – Microphone input with priority function and apt to receive microphone stand BM100 and BMGONG chime

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “PROEL AMP 120XL Mixer amplifier 120W”

Your email address will not be published. Required fields are marked *

Quick Comparison

PROEL AMP 120XL Mixer amplifier 120W removeBITTNER AUDIO XV400-2x200W-100V POWER AMPLIFIER removeTOA CA-115 35W Mobile Amplifier removeTOA A-2030 30 Watt Amplifier removeTOA VP-200VX-BGM Input & BGM Module for VX-2000 Series removeBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER remove
NamePROEL AMP 120XL Mixer amplifier 120W removeBITTNER AUDIO XV400-2x200W-100V POWER AMPLIFIER removeTOA CA-115 35W Mobile Amplifier removeTOA A-2030 30 Watt Amplifier removeTOA VP-200VX-BGM Input & BGM Module for VX-2000 Series removeBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER remove
Image
SKUH06PR00036XV400CA 115A-2030VP200VX-BGMXV200
Rating
Price 394.00 incl. GR VAT 892.79 incl. GR VAT 112.00 incl. GR VAT 235.00 incl. GR VAT 83.81 incl. GR VAT 727.87 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

120W AMPLIFIER AMP Proel amplifiers series have been designed for mixing and microphone announcement diffusion in PA applications. Main features - Protection circuit for the speakers against overload and short circuit - Led Power indicator - Led level indicator - Main volume control - Separate volume control for inputs from 1 to 5 - Low and high tone control - Ground connection screw - Four mic/line microphone with XLR (Phantom24V).

Three AUX inputs rear switchable - Main in/out function - Four outputs amongst which one at 4 ohm constant impedance and the other three at constant voltage (25/50/100V) - TAPE OUT output on RCA - Power switch selector 230V/117Vca - 24Vdc emergency power supply - Supplied by Proel with brackets for rack mounting purposes - Brackets code: 95RMAMPV - Microphone input with priority function and apt to receive microphone stand BM100 and BMGONG chime

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 400:  2x 200 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  17 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

  • Easy installation in practically any 12V battery equipped car.
  • Compact, rugged construction and front panel controls.
  • Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
  • Unidirectional dynamic microphone with talk switch.

Specification
Power Source Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used)
Power Consumption 2.2A or less at rated power output.
Output Power Rated 15W, max. 35W
Output Impedance 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections.
Distortion Less than 5% (at 1kHz rated output)
Frequency Response 100 ~ 10,000Hz
Input Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack
Dimensions (W x H x D): 178 x 50 x 132mm (mounting device excluded)
Weight 900g
Finish Front panel; ABS resin, Black
Case; Zinc plated steel sheet
Accessory Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (4A) ... 1
Connection cord ... 1 set
Accessory Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa)

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 30W
Power Consumption 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 280.2 (D) mm
Weight 5kg

 

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 200:  2x 100 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  15 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

 

Weight3.00 kg17.00 kg0.90 kg5.00 kg0.50 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 17.00 kg
Weight 0.90 kg
Weight 5.00 kg
Weight 0.50 kg
Weight 15.00 kg