Content |
EDGE15CXP ( Passive loudspeakers )
The monitor EDGE15CXP is a highly efficient 2 way low profile system. The bass frequencies are reproduced by a high excursion 15'' woofer with a 4'' voice coil. The woofer is equipped with a copper ring on the pole piece to achieve the lowest distortion in the critical vocal range. A small spherical wave guide, housed coaxially in the magnet assembly, loads a 1.5'' neodymium-magnet, titanium-diaphragm compression driver that delivers a 65° symmetric coverage for 1.4kHz upwards.
The EDGE15CXP monitor system is equipped with a high-performance, high-quality, passive filter. When used in passive configuration, it performs at its best coupled to the ASO25E15 analogue processor that optimises the monitor's performance even operating with only one channel power amplification. The EDGE15CXP can be internally switched to Bi-Amp operation and driven by the DSO26 digital processor using the appropriate memory program.
The extremely high performance coaxial transducer results in even tonal balance and high intelligibility even at extremely high power levels. Moreover, its shallow and compact shape gives it a discrete presence on stage, particularly for T.V. broadcast performances. EDGE15CXP can be also be utilised as a reinforcement system for the front-fill or down fill as well as being stand mounted with for example, the EDGE121SP, to create a drum-fill.
Datasheet | System type : | Coaxial 2-way vented enclosure | Nominal Impedance : | 8 ohm | Input power rating (AES) : | 800 W | Input power rating (program) : | 1600 W | Frequency response : | 60 Hz - 20 kHz (-6dB,+6dB) | Sensitivity : | 99 dB SPL ( 2.83V @ 1m ) | Maximum (peak) Output : | 131 dB @ 1m | Low Frequency Device : | 15'' woofer - 4'' voice coil | LF Nominal impedance : | 8 ohm | LF Sensitivity : | 99 dB SPL ( 2.83V @ 1m ) | LF Power rating (AES) : | 800 W | LF Power rating (program) : | 1600 W | High Frequency Device : | 1.5'' compression driver - coaxial | HF Nominal impedance : | 8 ohm | HF Sensitivity : | 109 dB SPL ( 2.83V @ 1m ) | HF Power rating (AES) : | 75 W | HF Power rating (program) : | 150 W | Coverage Angle H. (-6 dB) : | 65° average, 630 Hz to 20 kHz | Coverage Angle V. (-6 dB) : | 65° average, 630 Hz to 20 kHz | Monitor Taper : | 42° | Directivity Index (DI) : | 12.4 average, 630 Hz to 20 kHz | Signal Processing : | Proel DSO26, Proel ASO25E15 | Flying System : | 4 x M10 lateral | Connectors : | 2 x Neutrik Speakon NL4MP paralleled, FULL-RANGE: 1+ LF+/HF+, 1- LF-/HF-, BIAMP: 1+ LF+, 1- LF-, 2+ HF+, 2- HF-. | Construction : | 18/24mm birch plywood, internally reinforced | Finishing : | Paint finish | Cabinet Colour : | Black | Mounting Pole : | 1 x lateral | Weight : | 38 kg (83.790 pounds) | Dimensions (W x H x D) : | 58.4 x 39.4 x 61.9 cm |
|
Color Black Input Connections Parallel Neutrik® NL4 Speaker Type Fullrange Frequency Response (-3 dB) 70 - 20000 Hz Frequency Response (-10 dB) 55 - 20000 Hz Internal Crossover Yes Recommended High-Pass Frequency 60 Hz Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 132 dB Coverage (Nominal -6 dB) H° 90 ° Coverage (Nominal -6 dB) V° 50 ° Rotatable Horn No System Power Handling (Continuous/Program/Peak) 500 Watts LF Transducer SMX2121 HF Transducer DH3 Crossover Frequency 1600 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6.4 Ω Enclosure Material Plywood and MDF with EVCOAT Flying No Height 440 mm (17.32“) Width 364 mm (14.33“) Depth 573 mm (22.56“) Weight Net 19.8 kg (43.65 lbs) |
Descriptions:
The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.
Applications:
Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
FEATURES:
Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction
Weight: 35
|
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
Frequency Range
|
:
|
60 Hz - 20 kHz
|
Frequency Response
|
:
|
70 Hz - 20 kHz
|
Coverage Pattern
|
:
|
50 x 90 nominal
|
Crossover Modes
|
:
|
Passive / Bi-amp
|
Crossover Frequency
|
:
|
1.1 kHz
|
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
|
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
|
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
|
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
|
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
|
Nominal Impedance
|
:
|
8 ohms
|
Active Tunings
|
:
|
Tunings available at www.jblpro.com
|
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
|
Finish
|
:
|
Black DuraFlex finish
|
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
|
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
|
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
|
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
Chassis Size 381 mm (15“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Speaker Type Fullrange Frequency Response (-3 dB) 55 - 18000 Hz Frequency Response (-10 dB) 46 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 133 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer EVX155 Low Frequency Power Handling (Continuous/Program/Peak) 600 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 7.2/14.3 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 644 mm (25.35“) Width 457 mm (17.99“) Depth 340 mm (13.39“) Weight Net 28.4 kg (62.61 lbs) |
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor Arrayable Front of House Enclosure Theater Houses of worship Corporate
Features:
Unique Cabinet Geometry Adamson AX10 Low Frequency Driver 1" High Frequency Compression Driver Passive Operation Adamson Acoustic Waveguide Durable Dual Component Finish Roadworthy Construction
Weight: 22 |
Reviews
There are no reviews yet.