| Content |
EDGE15CXP ( Passive loudspeakers )
The monitor EDGE15CXP is a highly efficient 2 way low profile system. The bass frequencies are reproduced by a high excursion 15'' woofer with a 4'' voice coil. The woofer is equipped with a copper ring on the pole piece to achieve the lowest distortion in the critical vocal range. A small spherical wave guide, housed coaxially in the magnet assembly, loads a 1.5'' neodymium-magnet, titanium-diaphragm compression driver that delivers a 65° symmetric coverage for 1.4kHz upwards.
The EDGE15CXP monitor system is equipped with a high-performance, high-quality, passive filter. When used in passive configuration, it performs at its best coupled to the ASO25E15 analogue processor that optimises the monitor's performance even operating with only one channel power amplification. The EDGE15CXP can be internally switched to Bi-Amp operation and driven by the DSO26 digital processor using the appropriate memory program.
The extremely high performance coaxial transducer results in even tonal balance and high intelligibility even at extremely high power levels. Moreover, its shallow and compact shape gives it a discrete presence on stage, particularly for T.V. broadcast performances. EDGE15CXP can be also be utilised as a reinforcement system for the front-fill or down fill as well as being stand mounted with for example, the EDGE121SP, to create a drum-fill.
| Datasheet | | System type : | Coaxial 2-way vented enclosure | | Nominal Impedance : | 8 ohm | | Input power rating (AES) : | 800 W | | Input power rating (program) : | 1600 W | | Frequency response : | 60 Hz - 20 kHz (-6dB,+6dB) | | Sensitivity : | 99 dB SPL ( 2.83V @ 1m ) | | Maximum (peak) Output : | 131 dB @ 1m | | Low Frequency Device : | 15'' woofer - 4'' voice coil | | LF Nominal impedance : | 8 ohm | | LF Sensitivity : | 99 dB SPL ( 2.83V @ 1m ) | | LF Power rating (AES) : | 800 W | | LF Power rating (program) : | 1600 W | | High Frequency Device : | 1.5'' compression driver - coaxial | | HF Nominal impedance : | 8 ohm | | HF Sensitivity : | 109 dB SPL ( 2.83V @ 1m ) | | HF Power rating (AES) : | 75 W | | HF Power rating (program) : | 150 W | | Coverage Angle H. (-6 dB) : | 65° average, 630 Hz to 20 kHz | | Coverage Angle V. (-6 dB) : | 65° average, 630 Hz to 20 kHz | | Monitor Taper : | 42° | | Directivity Index (DI) : | 12.4 average, 630 Hz to 20 kHz | | Signal Processing : | Proel DSO26, Proel ASO25E15 | | Flying System : | 4 x M10 lateral | | Connectors : | 2 x Neutrik Speakon NL4MP paralleled, FULL-RANGE: 1+ LF+/HF+, 1- LF-/HF-, BIAMP: 1+ LF+, 1- LF-, 2+ HF+, 2- HF-. | | Construction : | 18/24mm birch plywood, internally reinforced | | Finishing : | Paint finish | | Cabinet Colour : | Black | | Mounting Pole : | 1 x lateral | | Weight : | 38 kg (83.790 pounds) | | Dimensions (W x H x D) : | 58.4 x 39.4 x 61.9 cm |
|
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 15 X
Description The multi-talented prodigy in the PREMIUM PR:O family. The
Description housing shape enables the PR:O 15 X to be used as a main
Description PA or a monitor speaker.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 60 Hz ? 19 kHz
Frequency response @ -10dB 53 Hz- 19 kHz
Speaker 1x 15?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Rigging points side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD) 47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD) 18 1/2? x 24 1/4? x 17 1/2?
Weight 21.6 kg
Weight 47.52 lbs
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Descriptions:
The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.
Applications:
Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
FEATURES:
Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction
Weight: 35
|
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
|
Reviews
There are no reviews yet.