| Content |
EDGE15CXP ( Passive loudspeakers )
The monitor EDGE15CXP is a highly efficient 2 way low profile system. The bass frequencies are reproduced by a high excursion 15'' woofer with a 4'' voice coil. The woofer is equipped with a copper ring on the pole piece to achieve the lowest distortion in the critical vocal range. A small spherical wave guide, housed coaxially in the magnet assembly, loads a 1.5'' neodymium-magnet, titanium-diaphragm compression driver that delivers a 65° symmetric coverage for 1.4kHz upwards.
The EDGE15CXP monitor system is equipped with a high-performance, high-quality, passive filter. When used in passive configuration, it performs at its best coupled to the ASO25E15 analogue processor that optimises the monitor's performance even operating with only one channel power amplification. The EDGE15CXP can be internally switched to Bi-Amp operation and driven by the DSO26 digital processor using the appropriate memory program.
The extremely high performance coaxial transducer results in even tonal balance and high intelligibility even at extremely high power levels. Moreover, its shallow and compact shape gives it a discrete presence on stage, particularly for T.V. broadcast performances. EDGE15CXP can be also be utilised as a reinforcement system for the front-fill or down fill as well as being stand mounted with for example, the EDGE121SP, to create a drum-fill.
| Datasheet | | System type : | Coaxial 2-way vented enclosure | | Nominal Impedance : | 8 ohm | | Input power rating (AES) : | 800 W | | Input power rating (program) : | 1600 W | | Frequency response : | 60 Hz - 20 kHz (-6dB,+6dB) | | Sensitivity : | 99 dB SPL ( 2.83V @ 1m ) | | Maximum (peak) Output : | 131 dB @ 1m | | Low Frequency Device : | 15'' woofer - 4'' voice coil | | LF Nominal impedance : | 8 ohm | | LF Sensitivity : | 99 dB SPL ( 2.83V @ 1m ) | | LF Power rating (AES) : | 800 W | | LF Power rating (program) : | 1600 W | | High Frequency Device : | 1.5'' compression driver - coaxial | | HF Nominal impedance : | 8 ohm | | HF Sensitivity : | 109 dB SPL ( 2.83V @ 1m ) | | HF Power rating (AES) : | 75 W | | HF Power rating (program) : | 150 W | | Coverage Angle H. (-6 dB) : | 65° average, 630 Hz to 20 kHz | | Coverage Angle V. (-6 dB) : | 65° average, 630 Hz to 20 kHz | | Monitor Taper : | 42° | | Directivity Index (DI) : | 12.4 average, 630 Hz to 20 kHz | | Signal Processing : | Proel DSO26, Proel ASO25E15 | | Flying System : | 4 x M10 lateral | | Connectors : | 2 x Neutrik Speakon NL4MP paralleled, FULL-RANGE: 1+ LF+/HF+, 1- LF-/HF-, BIAMP: 1+ LF+, 1- LF-, 2+ HF+, 2- HF-. | | Construction : | 18/24mm birch plywood, internally reinforced | | Finishing : | Paint finish | | Cabinet Colour : | Black | | Mounting Pole : | 1 x lateral | | Weight : | 38 kg (83.790 pounds) | | Dimensions (W x H x D) : | 58.4 x 39.4 x 61.9 cm |
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Color Black
Input Connections Parallel Neutrik® NL4
Speaker Type Fullrange
Frequency Response (-3 dB) 70 - 20000 Hz
Frequency Response (-10 dB) 55 - 20000 Hz
Internal Crossover Yes
Recommended High-Pass Frequency 60 Hz
Sensitivity 1 W/1 m 99 dB
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
Rotatable Horn No
System Power Handling (Continuous/Program/Peak) 500 Watts
LF Transducer SMX2121
HF Transducer DH3
Crossover Frequency 1600 Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6.4 Ω
Enclosure Material Plywood and MDF with EVCOAT
Flying No
Height 440 mm (17.32“)
Width 364 mm (14.33“)
Depth 573 mm (22.56“)
Weight Net 19.8 kg (43.65 lbs) | This 15" full-range loudspeaker stands out with impressive sound even at low frequencies. As a jack-of-all-trades, the unpowered ICOA 15 speaker by LD Systems and its design with a coaxial design and rotating, BEM-optimised CD horn means it is extremely flexible.
The horn-loaded woofer's outstanding bass reproduction makes the ICOA 15 the ideal choice for dance schools, musicians, bands and entertainers. It also allows DJs to play sets without the need for a subwoofer. The speaker also makes a good impression in fixed installations due to its freedom of flexibility.
Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. It Delivers a maximum sound pressure level of 125 dB peak and has 1000 Watt peak performance.
Thanks to its shock-resistant front grille and ideal 55° tilt angle make the ICOA 15 outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment. Extensive and smart accessories for installation and transport are optionally available. Four aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
| Product type |
PA loudspeaker |
| Type |
Passive |
| Low/mid driver dimensions |
15 " |
| Woofer size |
381 mm |
| Woofer magnet |
Ferrite |
| Woofer brand |
Custom-made |
| Horn |
BEM optimized CD Horn |
| HF driver dimensions |
1 " |
| HF driver size |
25.4 mm |
| HF driver magnet |
Ferrite |
| HF driver brand |
Custom-made |
| HF driver voice coil |
1.4 " |
| HF driver voice coil |
35 mm |
| Load rating (RMS) |
250 W |
| Dispersion (H x V) |
90° x 50° |
| Peak power |
1000 W |
| Frequency response |
48 - 20000 Hz |
| Crossover frequency |
2000 Hz |
| SPL (1W/1m) |
95 dB |
| Max. SPL |
125 dB |
| Impedance |
8 Ohm(s) |
| Loudspeaker inputs |
1 |
| Speaker input connections |
Speakon compatible |
| Loudspeaker outputs |
1 |
| Speaker output connections |
Speakon compatible |
| Cabinet material |
Polypropylene |
| Cabinet construction |
Bass Reflex |
| Mounting |
36mm flange (0°, 5°), 6 x M10 flying points |
| Monitor angle |
55 ° |
| Width |
416 mm |
| Height |
695 mm |
| Depth |
415 mm |
| Weight |
24,7 kg |
|
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
Features:
Unique Cabinet Geometry
Adamson AX10 Low Frequency Driver
1" High Frequency Compression Driver
Passive Operation
Adamson Acoustic Waveguide
Durable Dual Component Finish
Roadworthy Construction
Weight: 22 |
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
|
Reviews
There are no reviews yet.