PROEL HAP-10 4-CHANNELS HEADPHONE AMPLIFIER

HAP10 headphone amplifier is the ideal solution for those
who need to play one or more (mono/stereo) audio signals
on several headphone. 1 rack unit designed, HAP10 allows a
drummer, for example, to have the reference ?click?, the bass
and guitar rhythm and a singer?s voice on his/her headphone,
all at the same time. The sound technician can manage
more than one signal at the same time on his amplifier, and
put one of them on PFL for an excellent equalization. HAP10
features 4 totally independent amplification modules and all
its functions are indicated by the front panel LEDs. Moreover,
the amplifier can control input signals level and put the
signals on ?mute?; it can also connect various input modules
to play one or more output signals.
1) 4 INDEPENDENT MODULES - HAP10 features 4 totally
independent amplification modules.
2) MUTE/LINK FUNCTIONS - The amplifier can control input
signals level and put the signal on ?mute?; it can also connect
input various modules to play one or more output signals.
3) L/R INPUTS - HAP10 features LEFT/RIGHT inputs for each channel.
4) POWER SUPPLIER INCLUDED

Datasheet
Weight :   1.7 kg (3.748 pounds) 
Rack Units :  1U rack 19?
Power Supply :  9-12 Vcc 750 mA - jack female socket ? 2.1 mm
(power supplier included)
Inputs :  n.2 mono jack female sockets ? 6.3 mm
(R & L/mono)
Outputs :  n.1 stereo jack female socket ? 6.3 mm
Output power rated :  75 mW su 32 Ohm
Frequency response :  20 Hz - 20 KHz
Controls :  Input level, MUTE with Led, Led CLIP,
LINK (to connect the 4 independent
channels)
Master pack :  1 pcs

The amPlug Night Train perfectly simulates the high-gain sound of the compact VOX Night Train tube amp. Just as with the actual Night Train head, you can switch between the two preamp sounds. The BRIGHT position boosts the high-frequency range; the THICK position offers a chunkier, heavier sound. The emulated speaker cabinet circuit accurately recreates the sound of the Night Train amp being played through the matching V112NT single 12" Night Train speaker cabinet. As a finishing touch, amPlug Night Train share some of the cool looks of its namesake amplifier.

• Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
• Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
• Power supply: AAA batteries (x 2)
• Battery life: amPlug Night Train:
• With zinc-carbon batteries: approximately 9 hours
• With alkaline batteries: approximately 24 hours
• Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
• Weight: 40 g/1.41 oz. (not including batteries)
• Included items: AAA batteries (X2) (for verifying operation)

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

Overview

With Sennheiserʼs HDVD 800, sound is perfect. The HDVD 800 is able to connect with digital sources and is equipped with a high-quality Burr-Brown digital/analog converter (DAC) that converts digital audio data into analog signals with a resolution of 24 bits and a sampling rate of up to 192 kHz. This enables the HDVD 800 to transmit the entire frequency spectrum of high-end audio sources without any loss of frequencies.

In addition to the symmetrical inputs, the HDVD 800 also has an asymmetrical input socket; incoming signals are symmetrized before further processing takes place. Digital sources can be connected to the rear of the unit via an XLR (AES/EBU) input, optical and coaxial (S/PDIF) digital inputs or USB. All digital inputs accept signals up to 24 bit at 192 KHz*. Designed and manufactured in Germany, this high-end, solid-state amplifier harmonize perfectly and deliver an ultimate acoustic performance when paired with any of Sennheiserʼs audiophile headphones.

Features
D/A transducer for all common formats up to 24 bit / 192 kHz
D/A transducer can be used for CD and DVD players
AES/BU, S/PDIF, USB inputs
Symmetrical (XLR) and asymmetrical (RCA) analog inputs
Symmetrical output
Sockets for four sets of headphones (two of which symmetrical)

The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

INPUT:    1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS:    5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB):    25kHz.
CONTROL:    5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE:    -60dB to +10dB.
S/N RATIO:    78dB.
THD:    0.08% @100mW.
POWER SOURCE:    12V DC, 370mA nom, 1A max.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT:    0.68kg (1.5lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19" rack adapter.