PROEL HAP-10 4-CHANNELS HEADPHONE AMPLIFIER

Discontinued

79.09 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
HAP10 headphone amplifier is the ideal solution for those who need to play one or more (mono/stereo) audio signals on several headphone. 1 rack unit designed, HAP10 allows a drummer, for example, to have the reference ?click?, the bass and guitar rhythm and a singer?s voice on his/her headphone, all at the same time. The […]

 

Read more

HAP10 headphone amplifier is the ideal solution for those
who need to play one or more (mono/stereo) audio signals
on several headphone. 1 rack unit designed, HAP10 allows a
drummer, for example, to have the reference ?click?, the bass
and guitar rhythm and a singer?s voice on his/her headphone,
all at the same time. The sound technician can manage
more than one signal at the same time on his amplifier, and
put one of them on PFL for an excellent equalization. HAP10
features 4 totally independent amplification modules and all
its functions are indicated by the front panel LEDs. Moreover,
the amplifier can control input signals level and put the
signals on ?mute?; it can also connect various input modules
to play one or more output signals.
1) 4 INDEPENDENT MODULES – HAP10 features 4 totally
independent amplification modules.
2) MUTE/LINK FUNCTIONS – The amplifier can control input
signals level and put the signal on ?mute?; it can also connect
input various modules to play one or more output signals.
3) L/R INPUTS – HAP10 features LEFT/RIGHT inputs for each channel.
4) POWER SUPPLIER INCLUDED

Datasheet
Weight :   1.7 kg (3.748 pounds) 
Rack Units :  1U rack 19?
Power Supply :  9-12 Vcc 750 mA – jack female socket ? 2.1 mm
(power supplier included)
Inputs :  n.2 mono jack female sockets ? 6.3 mm
(R & L/mono)
Outputs :  n.1 stereo jack female socket ? 6.3 mm
Output power rated :  75 mW su 32 Ohm
Frequency response :  20 Hz – 20 KHz
Controls :  Input level, MUTE with Led, Led CLIP,
LINK (to connect the 4 independent
channels)
Master pack :  1 pcs

Weight 3.70 kg

Reviews

There are no reviews yet.

Be the first to review “PROEL HAP-10 4-CHANNELS HEADPHONE AMPLIFIER”

Your email address will not be published. Required fields are marked *

Quick Comparison

PROEL HAP-10 4-CHANNELS HEADPHONE AMPLIFIER removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER removeSennheiser HDVA 600 Headphones Amplifier remove
NamePROEL HAP-10 4-CHANNELS HEADPHONE AMPLIFIER removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER removeSennheiser HDVA 600 Headphones Amplifier remove
Image
SKUHAP10VOX AMPLUG NIGHT TRAINAT/EM/000036VM-50HHP4 EUS07SE00313
Rating
Price 79.09 incl. GR VAT 30.51 incl. GR VAT 97.00 incl. GR VAT 264.66 incl. GR VAT 138.87 incl. GR VAT 1,499.00 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

HAP10 headphone amplifier is the ideal solution for those
who need to play one or more (mono/stereo) audio signals
on several headphone. 1 rack unit designed, HAP10 allows a
drummer, for example, to have the reference ?click?, the bass
and guitar rhythm and a singer?s voice on his/her headphone,
all at the same time. The sound technician can manage
more than one signal at the same time on his amplifier, and
put one of them on PFL for an excellent equalization. HAP10
features 4 totally independent amplification modules and all
its functions are indicated by the front panel LEDs. Moreover,
the amplifier can control input signals level and put the
signals on ?mute?; it can also connect various input modules
to play one or more output signals.
1) 4 INDEPENDENT MODULES - HAP10 features 4 totally
independent amplification modules.
2) MUTE/LINK FUNCTIONS - The amplifier can control input
signals level and put the signal on ?mute?; it can also connect
input various modules to play one or more output signals.
3) L/R INPUTS - HAP10 features LEFT/RIGHT inputs for each channel.
4) POWER SUPPLIER INCLUDED

Datasheet
Weight :   1.7 kg (3.748 pounds) 
Rack Units :  1U rack 19?
Power Supply :  9-12 Vcc 750 mA - jack female socket ? 2.1 mm
(power supplier included)
Inputs :  n.2 mono jack female sockets ? 6.3 mm
(R & L/mono)
Outputs :  n.1 stereo jack female socket ? 6.3 mm
Output power rated :  75 mW su 32 Ohm
Frequency response :  20 Hz - 20 KHz
Controls :  Input level, MUTE with Led, Led CLIP,
LINK (to connect the 4 independent
channels)
Master pack :  1 pcs

The amPlug Night Train perfectly simulates the high-gain sound of the compact VOX Night Train tube amp. Just as with the actual Night Train head, you can switch between the two preamp sounds. The BRIGHT position boosts the high-frequency range; the THICK position offers a chunkier, heavier sound. The emulated speaker cabinet circuit accurately recreates the sound of the Night Train amp being played through the matching V112NT single 12" Night Train speaker cabinet. As a finishing touch, amPlug Night Train share some of the cool looks of its namesake amplifier.

Specifications
  • Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
  • Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
  • Power supply: AAA batteries (x 2)
  • Battery life: amPlug Night Train:
  • With zinc-carbon batteries: approximately 9 hours
  • With alkaline batteries: approximately 24 hours
  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
  • Weight: 40 g/1.41 oz. (not including batteries)
  • Included items: AAA batteries (X2) (for verifying operation)

 

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

INPUT:    1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS:    5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB):    25kHz.
CONTROL:    5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE:    -60dB to +10dB.
S/N RATIO:    78dB.
THD:    0.08% @100mW.
POWER SOURCE:    12V DC, 370mA nom, 1A max.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT:    0.68kg (1.5lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19" rack adapter.

The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price. Features ? Four High Power Headphone Outputs ? Ultra loud (150mW per channel) ? Ultra quiet operation ? Musical Wide Dynamic Range ? Control Room Monitor Outputs with Level Control ? Mono or Stereo Operation ? Monitor Mute Switch ? Daisy Chain an Infinite Number of Units ? Compact package Technical Specifications Input TRS Impedance 10K Ohms Panel Controls Headphone Level 1 to 12 Monitor / Feed Output -80dB to +10dB Mono Switch Monitor / Feed Mute Power Supply Type Linear Input 16VAC/1000mA Output TRS Balanced 51 Ohms Impedance Performance THD+Noise (Unweighted) 0.002% Noise Floor  -98dB Signal To Noise >95dB Power Supply Rejection >98dB Power 16 Watts Physical Weight  5lbs./ 2.3 kg. Dimensions 5.5 x 5.5 x 1.75 Mounting Max Rack and Universal Rack Tray Chassis Steel Panel Brushed Aluminum Sides Cast Aluminum

Overview

Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.

Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability

Weight3.70 kg0.40 kg0.59 kg0.68 kg2.00 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.70 kg
Weight 0.40 kg
Weight 0.59 kg
Weight 0.68 kg
Weight 2.00 kg
Weight 0.40 kg