| Content |
• PROEL 864.500 MHz frequency range
• up to 30 meter / 100 feet range
• 50 Hz - 15 KHz frequency response
• -105 dB signal / noise ratio
• Low-profile desktop receiver with two foldable antennas
• Up to 4 systems usable in the same location
• ABS carrying and storage case
TECHNICAL SHEET
Channel Spacing:200 kHz
Frequency response:50 Hz ~ 15 Khz
Outputs:balanced XLR ; Unbalanced 6,3 mm jack
Antenna:switching diversity
Receiver supply:13 ~ 15 V dc 300 mA.
Transmitter supply:2 x 1,5V \' AA \' battery type
Battery autonomy:up to 6 ~ 8 hours
Transmitter dimension:100 (W) x 65 (D) x 30 (H) mm.
Microphone:headset
Transducer type:condenser
Polar pattern:cardioid
| Type: |
Set |
| Application: |
Head Set |
|
Free yourself!
for live sound, presentations and installations
The WMS420 wireless microphone system provides a highly flexible as well as easy to use solution. The ultra high frequency system is set up within seconds and is equally suitable on stage as well as in locations where a single- or multi channel solution is needed.
The entire WMS420 wireless system consists of the SR420 stationary receiver, HT420 handheld transmitter and the PT420 pocket transmitter. The HT420 handheld transmitter is available with the patented D5 dynamic microphone acoustic. This capsule guarantees maximum rejection against feedback, reduced handling noise and the famous AKG sound. Both transmitters are shipped with charging contacts that enable the use of rechargeable batteries. Moreover the transmitters offer exceptional eight hours of operation time from a single AA size battery, which dramatically reduces the operating costs in day-to-day use.
The detachable receiver antennas allow the use of professional accessories, such as antenna splitters and remote mounted directional antennas for multi channel systems. The WMS420 series includes three different bodypack sets. The head-worn set includes the high performance C555L condenser microphone. The presenter set includes the professional C417L lavalier microphone. The guitar set includes an instrument cable. With the AKG WMS420 system up to eight channels can be run simultaneously.
|
The WM-5320H wireless microphone has been manufactured for use with a UHF system. It incorporates a cardioid pick-up pattern and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise. It's gooseneck can be adjusted to any desired angle to facilitate use.
Case
| Modulation | Frequency modulation | | Frequency Range | 636 - 865 MHz*, UHF | | Channel Selectable | 64 channels (the number of channels may differ from country to country) | | RF Carrier Power | 50 mW or less | | Tone Frequency | 32.768 kHz | | Oscillator | PLL synthesized | | Maximum Input Level | 120 dB SPL | | Battery | LR6 (AA) | | Battery Life | 10 hours or more (alkaline) | | Indicator | Power/Battery lamps | | Antenna | Built-in type | | Finish | Resin, coating | | Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm | | Weight | 90 g (with battery) |
Headset
| Microphone Element | Electret condenser microphone, cardioid | | Cable Length | 1.4 m | | Connector | φ3.5 plug (EIAJ RC701) | | Accessory | Screw driver ……1, Neck strap ……1 |
|---|
| 1 Channel Diversity UHF Wireless Set with Headset Microphone and Belt Pack
Operating in the 630.2 MHz band, this ECO 2 Series set includes a headset microphone with cardioid polar pattern, a bodypack transmitter and a diversity receiver featuring balanced XLR and unbalanced 1/4” outputs, level and squelch controls and LED status indicators.
Product type
Wireless Microphone System Accessories
Frequency response
20 - 20.000 Hz
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Transmission frequency range
630,200 MHz
Inputs
Mini-XLR (3-pin) with phantom power (for headset)
Frequency response
60 - 16,000 Hz
Rated HF output power
10 mW
Operating time
>10 h (with alkaline batteries)
Other features
incl. batteries
Controls
Mic / 0dB / -10 dB switch, power (on/off/mute)
Indicators
battery status
Operating voltage
2 x AA battery
Antenna connector
fixed to housing
Signal-to-noise ratio
> 105 dB
Audio output, balanced
XLR
Audio output, unbalanced
6.3 mm jack
Controls
Mute Level (Squelch), volume
Indicators
Antenna A/B, Audio signal (Norm / Peak), Power
Operating voltage
12 - 18 V DC, 400 mA, External Power Supply
Accessories (included)
Batteries, Power supply
|
Set composed of:
- 1 x LDWIN42R2
- 2 x LDWIN42BP
- 2 x LDWS1000MW
Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.
With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).
The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.
The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.
- UHF frequency range 734 - 776 MHz
- 1680 frequencies
- 20 groups with 577 fixed frequencies
- user bank with 1680 freely selectable frequencies in 25 kHz increments
- 255 addresses selectable
- channel scan
- true diversity receiver
- interchangeable microphone capsules (dynamic / condenser)
Receiver display
- volume
- radio frequency level antenna A/B
- audio level
- battery status of transmitter
- transmitter sync via infrared
- squelch setting in menu
- equalizer setting in menu
- naming template in menu
- 10 sets storable
- lockable menu
- balanced XLR output, unbalanced 6.3 mm jack
- adjustable output
- adjustable headphone output
Transmitter Display - battery status
- RF power
- AF power
- additional system information
Technical Specifications WIN42 Receiver - Model Name: LDWIN42R
- Channels: 1680 (20 groups + 1 user group)
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- THD:
- Signal/Noise ratio: >100 dB
- Audio Output: XLR balanced / 6,3 mm Jack unbalanced
- Power Supply: external power adapter 13,5 V DC, 500 mA
- Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter - Model Name: LDWIN42MD
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Power requirement: 2 x AA size batteries
- Operating time: >13 h with alkaline batteries
- Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter - Model Name: LDWIN42BP
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Input Connector: mini XLR 3-pole (phantom power for headset)
- Power requirement: 2 x AA size batteries
- Operating time: >14 h with alkaline batteries
- Dimensions (W x H x D): 87 x 25 x 63 mm
|
The WM-5320A wireless microphone has been manufactured for use with a UHF system. It incorporates a cardioid pick-up pattern and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise. It's gooseneck can be adjusted to any desired angle to facilitate use. The WM-5320A also features the function to protect it from the user's sweat.
Case
| Modulation | Frequency modulation | | Frequency Range | 636 - 865 MHz*, UHF | | Channel Selectable | 64 channels (the number of channels may differ from country to country) | | RF Carrier Power | 50 mW or less | | Tone Frequency | 32.768 kHz | | Oscillator | PLL synthesized | | Maximum Input Level | 120 dB SPL | | Battery | LR6 (AA) | | Battery Life | 10 hours or more (alkaline) | | Indicator | Power/Battery lamps | | Antenna | Built-in type | | Finish | Resin, coating | | Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm | | Weight | 90 g (with battery) |
Headset
| Microphone Element | Electret condenser microphone, cardioid | | Cable Length | 1.4 m | | Connector | φ3.5 plug (EIAJ RC701) | | Accessory | Waist pouch……1, Screw driver……1 |
|---|
|
Reviews
There are no reviews yet.