Content |
The White AcousticCoverage Series QSC AC-S6T is a pair of transformer-equipped 6.5" surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
Outfitted with a 6.5" polypropylene woofer and a 1" aluminum dome tweeter in a UV-treated ABS enclosure with a ported baffle, the AC-S6T offers broad 130° conical coverage while providing a frequency range of 60 Hz to 20 kHz (-10 dB). The speaker is capable of handling 30W RMS and producing a peak maximum SPL of 107 dB.
The AC-S6T utilizes a 4-pole Euroblock connector on the rear panel for easy input and loop-thru wiring. A yoke bracket is included for simplified surface-mount installation.
High-quality transducers provide increased clarity through the critical voice range and improved musicality often not seen in typical BGM-class products
6.5" polypropylene cone transducer with butyl rubber surround and 1" aluminum dome tweeter
130° of conical coverage reduces the number of loudspeakers required for even coverage in close proximity
UV-treated, high-impact ABS enclosure and ported baffle assembly
Tuned for added musicality and low-frequency extension down to 60 Hz (-10 dB)
Low-saturation, low-loss 70/100V transformer with 8-ohm bypass and rear-panel tap selector
4-pole Euroblock connector with loop-thru wiring located the rear of the enclosure
Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)
Active or Passive |
Passive |
Number of Included Speakers |
2 |
Speaker Configuration |
2-Way |
Power Handling |
For 2 Hours:
30 W RMS |
Recommended Amplifier Power |
60 W |
Constant Voltage / Transformer Taps |
70 V:
30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass
100 V:
30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass |
Impedance |
8 Ohms (Transformer Bypassed) |
Transformer Wattage |
30 W |
Enclosure Type |
Bass-Reflex |
Shielded |
No |
Drivers
HF Driver |
1 x 1" / 2.54 cm Aluminum Dome Tweeter |
HF Voice Coil |
1" / 2.54 cm |
LF Driver |
1 x 6.5" / 16.51 cm Polypropylene Woofer |
LF Voice Coil |
1" / 2.54 cm |
Performance
Frequency Range |
60 Hz to 20 kHz -10 dB |
Maximum SPL |
101 dB (Continuous)
107 dB (Peak) |
Sensitivity |
86 dB SPL |
Coverage Angle |
130° (Conical) |
Directivity |
6 (Directivity/Q Factor)
8 dB (Directivity Index) |
Maximum Input Voltage |
15.5 V RMS |
Connectivity
I/O Connectors |
1 x Euroblock 4-Pole Speaker Input/Thru (Removable) |
Maximum Wire Gauge |
18 AWG |
Environmental
Water / Weather Resistance |
Water Resistant |
IP Rating |
IP44 |
Operating Temperature |
-4 to 122°F / -20 to 50°C |
Physical
Color |
White |
Mounting |
1 x Bracket Point (Each Side) |
Construction Material |
ABS, Metal Grille |
Dimensions |
11.9 x 8.5 x 7.8" / 30.23 x 21.59 x 19.81 cm |
Weight |
8.3 lb / 3.8 kg (Each Speaker) |
|
The MAILA SAT satellite speaker is a true line array element and is full of surprises The elegant and robust unibody aluminium enclosure houses five 1'' tweeters in front of a 6.5'' midrange driver, arranged in a coaxial design based on Advanced WaveAhead® technology and coupled almost interference-free via the SonicGuide® (two combined waveguides). The result is a classic line array radiation pattern with impressive throw and energy density. The horn-loaded 6.5'' midrange driver with 1.8'' voice coil and neodymium driver features a split-path waveguide as well as a phase plug and enables a particularly high sensitivity in the midrange.
The tweeter section is formed by five vertically arranged 1'' dome tweeters that do not require a compression chamber and thus offer an even and natural dispersion pattern (100° horizontal x 8° vertical). At the same time, the midrange driver's phase plug reduces the heat generated by the tweeter voice coils, contributing to the satellite's increased efficiency. Furthermore, the passive membrane placed behind the woofers provides extended punch down to 100 Hz despite the compact dimensions of the satellite housing.
On the back of the housing of each MAILA SAT is a rotating handle which hides a groundbreaking innovation: via the patented EasySplay® mechanism, users can adjust the inclination of each individual satellite continously from 0° to 8° in the blink of an eye. The angle can be adjusted with just one hand, even under load. In this way, every MAILA system offers a uniquely flexible concept for adapting the sound coverage to any sound reinforcement situation at any time.
For an especially easy setup, the passive MAILA SAT array satellites are equipped with the LD Systems SmartLink+® system, which ensures a cable-free connection between the MAILA SAT modules as well as between MAILA SAT and MAILA SPA amplifier module or MAILA COL column module. Both the audio signal and the power supply for the passive MAILA elements are provided via the robust aluminium rails. In addition, SmartLink+® allows the installed satellites to be detected for automatic or manual DSP processing.
Product type
MAILA Array Satellite
Midrange size
5 x 1" Titanium Dome Tweeter
Woofer dimensions
1 x 6.5 "
Woofer voice coil (mm)
45 mm
Load rating (AES)
175 W / 50 W
Dispersion (H x V)
100° x 8° Nominal Directivity
Frequency response (-6dB)
100 Hz - 20000 Hz
Max. SPL Peak (Pink noise)
129.1 dB (fullspace @1m, Crastfactor 4)
Max. SPL Peak (Sine burst)
128.2 dB (fullspace @1m, 10% THD)
Max. SPL Avarage (Sine burst)
115 dB (100 Hz - 10 kHz, fullspace @1m, 10% THD)
Controls
EasySplay® angle adjustment
Speaker connections
SmartLink+®
Housing material
Die-cast aluminium
Cabinet surface
Powder-coated
|
Configuration |
Passive 2-Way |
Enclosure Type |
Bass-Reflex Loudspeaker |
Total Power Capacity |
40 W RMS
160 W Peak |
Constant Voltage / Transformer Taps |
None |
System Impedance |
8 Ohms |
Drivers
HF Driver |
1" / 25.4 mm Tweeter |
HF Voice Coil |
0.8" / 20.3 mm |
MF Driver |
None |
LF Driver |
4" / 101.6 mm Woofer |
LF Voice Coil |
1" / 25.4 mm |
Magnet |
Neodymium |
Performance
Frequency Response |
70 Hz to 20 kHz -10 dB |
Maximum SPL |
108 dB |
Coverage Angle |
110° H x 100° V |
Directivity |
7 (Directivity Index) |
Speaker Sensitivity |
86 dB |
Protections |
Overcurrent, Ultrasonic |
Connectivity
Audio I/O |
2 x Euroblock Speaker Input/Output |
Signal Processing
Crossover |
3 kHz |
Phase Adjustment |
None |
Physical
Mounting |
4 x M6 Bracket Point |
Handles |
None |
Construction Material |
Metal, Plastic |
Dimensions |
8.5 x 6.1 x 5.3" / 216 x 154 x 135 mm |
Weight |
2.2 kg |
|
For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution - MAUI® i1.
This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.
Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.
For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.
Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.
The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.
Product type
Installation Loudspeakers
Type
Passive
Low/mid driver dimensions
9 x 3 "
Woofer size
76.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Horn
BEM optimized CD Horn
HF driver dimensions
2 x 1 "
HF Driver Size
25.4 mm
HF driver magnet
Neodymium
HF driver brand
Custom-made
Dispersion (H x V)
120° x 30
Load rating (RMS)
120 W
Peak power
480 W
Frequency response
130 - 19000 Hz
Crossover frequency
2500 Hz
SPL (1W/1m)
94 dB
Max. SPL
116 dB
Impedance
8 Ohm(s)
Input selector switch
70 V - 100V - 8 Ohms (transformer bypass)
100V Transformer power taps
60 - 30 - 15 - 7.5 W
70V Transformer power taps
60 - 30 - 15 - 7.5 W
Protection class IP
65
Loudspeaker inputs
1
Speaker input connections
4-pin Euro Terminal Block (Pitch - 5,08 mm)
Cabinet material
Aluminum
Cabinet construction
Closed
Width
85 mm
Height
985 mm
Depth
105 mm
Accessories (included)
U-Bracket for surface mount
Optional Accessories
Bracket for tilt installation applications
Weight
8,6 kg
|
- For Restaurants, Shops & More
- Elegant Design, Easy to Install
- High-Quality Sound for BMG or Foreground
- 120 x 120° Directivity
- 4" Woofer + 1" Dome Tweeter
- 90 Hz to 20 kHz Frequency Response
- 60W RMS Power Handling
- 113 dB SPL (Max)
- 4-Pole Euroblock Connector
- Includes Wall Mount Bracket
|
Configuration |
Passive 2-Way |
Enclosure Type |
Bass-Reflex Loudspeaker |
Total Power Capacity |
40 W RMS
160 W Peak |
Constant Voltage / Transformer Taps |
None |
System Impedance |
8 Ohms |
Drivers
HF Driver |
1" / 25.4 mm Tweeter |
HF Voice Coil |
0.8" / 20.3 mm |
MF Driver |
None |
LF Driver |
4" / 101.6 mm Woofer |
LF Voice Coil |
1" / 25.4 mm |
Magnet |
Neodymium |
Performance
Frequency Response |
70 Hz to 20 kHz -10 dB |
Maximum SPL |
108 dB |
Coverage Angle |
110° H x 100° V |
Directivity |
7 (Directivity Index) |
Speaker Sensitivity |
86 dB |
Protections |
Overcurrent, Ultrasonic |
Connectivity
Audio I/O |
2 x Euroblock Speaker Input/Output |
Signal Processing
Crossover |
3 kHz |
Phase Adjustment |
None |
Physical
Mounting |
4 x M6 Bracket Point |
Handles |
None |
Construction Material |
Metal, Plastic |
Dimensions |
8.5 x 6.1 x 5.3" / 216 x 154 x 135 mm |
Weight |
2.2 kg |
|
Reviews
There are no reviews yet.