RADIAL Dragster Load Correction Device Tonebone Pedal

74.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: G05RL00017 Category:
The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp. The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate […]

 

Read more

The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp.

The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp.

When a guitar is connected to a guitar amplifier, the pickup and the amp join together to form a circuit. But as soon as you introduce a buffer in between the pickup and the amplifier, the natural relationship is lost. The pickup only ‘sees’ the buffer and the tone changes. This is the fundamental reason why guitarists hate the sound of wireless systems and non-true-bypass pedals. The Dragster solves the problem by restoring the full rich tone you lose when you plug your guitar into a wireless transmitter or other types of buffered inputs such as effects pedals, mixing consoles, sound cards or all-in-one recording systems.

The Dragster is plug & play easy to use. You simply connect your guitar or bass to the Dragster using one of the ¼” inputs and then exit the Dragster using the other. Set the thumb wheel to the sound you like and you are set to go! The compact design makes it easy to fit on any pedalboard while the built-in mounting flanges make it a breeze to attach to a guitar strap. And its unobtrusive size and light weight won’t slow you down. Few guitar accessories offer the tremendous ‘bang-for-the buck’ of a Dragster.

The Dragster – a load correction device that sounds so good, you will use it on everything.

 

Weight 2.72 kg

Reviews

There are no reviews yet.

Be the first to review “RADIAL Dragster Load Correction Device Tonebone Pedal”

Your email address will not be published. Required fields are marked *

Quick Comparison

RADIAL Dragster Load Correction Device Tonebone Pedal removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeOMNITRONIC LH-065 ACTIVE D.I BOX removePALMER AUDIO PDI09 TOOLS Guitar DI-box removeALPHATON DI 1000 TUBE D.I BOX removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX remove
NameRADIAL Dragster Load Correction Device Tonebone Pedal removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeOMNITRONIC LH-065 ACTIVE D.I BOX removePALMER AUDIO PDI09 TOOLS Guitar DI-box removeALPHATON DI 1000 TUBE D.I BOX removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX remove
Image
SKUG05RL00017ADB4ELH065PDI09DI 1000DI-PLUS 2
Rating
Price 74.00 incl. GR VAT 585.13 incl. GR VAT 77.67 incl. GR VAT 100.06 incl. GR VAT 773.75 incl. GR VAT 203.11 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp.

The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp.

When a guitar is connected to a guitar amplifier, the pickup and the amp join together to form a circuit. But as soon as you introduce a buffer in between the pickup and the amplifier, the natural relationship is lost. The pickup only 'sees' the buffer and the tone changes. This is the fundamental reason why guitarists hate the sound of wireless systems and non-true-bypass pedals. The Dragster solves the problem by restoring the full rich tone you lose when you plug your guitar into a wireless transmitter or other types of buffered inputs such as effects pedals, mixing consoles, sound cards or all-in-one recording systems.

The Dragster is plug & play easy to use. You simply connect your guitar or bass to the Dragster using one of the ¼" inputs and then exit the Dragster using the other. Set the thumb wheel to the sound you like and you are set to go! The compact design makes it easy to fit on any pedalboard while the built-in mounting flanges make it a breeze to attach to a guitar strap. And its unobtrusive size and light weight won't slow you down. Few guitar accessories offer the tremendous 'bang-for-the buck' of a Dragster.

The Dragster – a load correction device that sounds so good, you will use it on everything.

 

You're serious about getting rid of all that excess noise on stage, but you've got so many line
instruments you don't know where to start. The ADB-4 from Stewart can take care of all your
high impedance problems. The ADB-4 is 4 active direct boxes, all in a module that only takes
up half a space on your keyboard rack. It's a rugged, durable piece of equipment that packs a
lot of DI power.

? Requires phantom power or 9v battery
? Ground lift switch
? Instrument or speaker level switch
? Transformerless
? Can be used with amp up to 400w
? RF shielding

Passive DI box especially designed for guitars.

The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow“, "Normal“, or "Bright“.

Technical specifications:

  • Input: 6.3 mm jack with parallel "THRU" socket
  • Output: male XLR transformer balanced
  • Attenuator: (Level switch) 0 dB for line signals, -15 dB for small amps up to 10 w, 30 dB for large amps up to 200 w
  • No battery necessary

Tube-buffered DI-Box DI-1000

The Tube-Buffered DI-Box DI-1000 allows the extraction of all the musical details of
musical interfaces without degrading the sound. This can only be achieved by
providing a very high input impedance to avoid any loading of instrument pickups.This
design approach allows seemingly infinite headroom to preserve the real dynamic range
of the interfaced instruments.A vacuum tube enables all these goals to be achieved
without any compromises in sound quality.The sonic difference between a standard
DI-Box and the Tube-Buffered DI-Box is comparable to the musical resolution difference
between a standard microphone and a studio microphone.One of the best transformers,
the very transparent sounding JENSEN JT-DB-E, was chosen providing complete ground
isolation. The parameters of this transformer, like frequency response, phase response,
group delay and geadroom capabilities, play a vital part in the performance of this DI-Box.
 
Technical Specifications
Input
The signal of the instrument is directly fed to the tube circuit with > 20 MOhms input
impedance to prevent any signal degradation, inevitable in traditional designs.
Buffered Output“
The second stage of the vacuum tube is used to buffer the signal and lower the output
impedance to < 8 kOhms. This unity gain output allows for cable runs of 10 meters
without loosing high frequency information.
Boost circuit
The boost circuit increases the signal send to the output transformer by 15 dB. This may
be useful for instruments with extremely low output, but decreases headroom capability
to 6 Volt rms. Under these circumstances the signal may be clipped, concerning the output
transformer?s signal, which gives you 2nd harmonic tube-like distortion. This distortion
normally does not occur - but is sometimes desirable, being the reason for this special feature.
Unity circuit
The unity circuit feeds a low distortion unity gain signal to the JENSEN output transformer.
This gives the best possible sound quality.
Ground-lift“-Switch
This front panel mounted switch allows complete ground and electrical isolation between the
direct injection box and the console or recording device.
 

Mechanical Specifications
Cabinet 2 mm stainless steel
Front- and rear-panel 1,5 mm stainless steel lasercut and photo-chemically etched
Dimensions 185 x 100 x 40 mm
Vibration insulation 4 high-compliance rubber-elements
Operating Voltage
220/110 V AC, selectable via rear panel mounted switch. The fuse is easily
accessible from the rear panel. IEC mains connector with optional fixture.
Construction details
Double sided glass fibre contacted PCB with 70 mm copper plating. 1% metal film resistors
and the finest polypropylene capacitors are used in the signal path. MIL type Switchcraft jacks
and high performance switches ensure flawless operation. The power supply is optimised via
measurement quality toroid transformer and a low impedance design to ensure the lowest
possible noise. Through a double sided PCB all parts are roadworthy secured. A waterclear
blue LED perfects the aesthetics of the DI box.

Technical Data
Input impedance > 20 MOhm
Output impedance180 Ohm at 1 kHz
Frequncy response 20 Hz - 20 kHz (-0,1 dB)
                             5 Hz - 120 kHz (-3 dB)
THD at 0 dBv  0,06% at 20 Hz
                      0,04% at 1 kHz
                      0,035% at 20 kHz
Signal to Noise Ratio 86 dB
Tube ECC 83/7025 A - military E 83 CC optional
Output transformer JENSEN JT-DB-E
Polarity Pin 2 Hot , AES/IEC -Standard
Max. Input voltage > 30 V peak
 

Phantom or battery powered in a rugged steel chassis
 
The ARX DI-PLUS 2 represents another major step forward in active direct boxes. Packaged in
a single channel stand-alone format, the DI-PLUS 2 represents a fresh look at active stereo
D.I. concepts.

Precision engineered
Ultra quiet, ultra clean circuitry delivers maximum headroom whatever the signal. Premium grade
components, plus an all-steel chassis gives excellent hum and noise specifications and superb
audio quality in a tough, roadworthy package. Accurate Left and Right channel level matching keeps
the stereo image centred.

Level control
The DI-PLUS 2 features two high impedance unbalanced inputs on the front panel, running to balanced
XLR outputs on the rear. A a global Pad switch drops inputs by 20dB, making it suitable for all applications
from the softest keyboard to the hottest broadcast levels.
 
Battery compartment
The revolutionary simple 'clamshell' action of the DI-PLUS 2 battery compartment makes battery changing
extremely easy, even on the darkest stages.
A 9v alkaline battery snaps into a PCB mounted battery holder for fast, secure location. No fragile battery clip
leads to break, no tools required, no screws to lose. Production crew heaven!
 
Automatic Phantom switching
The DI-PLUS 2 will automatically switch itself to the console's own Phantom Power, if available, and an LED
will indicate this mode. Turn the Phantom Power off and it will instantly revert back to battery mode.

Rugged all-steel case
A lot of direct boxes are fitted into brittle cast alloy cases. Not this one! The tough all-steel inner and outer
chassis of the DI-PLUS 2 provide excellent RF/EMF shielding while making it a sturdy, heavy duty unit that
is hard to dislodge, and hard to leave behind.
 
Rear panel showing Left and Right XLR connectors, ground lift switch, battery check switch and LED, plus
phantom power On LED and captive screw for opening up the unit for battery changing
 
Whether you're a Studio or Live Sound engineer, installation contractor, or broadcast engineer, you want all
the dynamics,clarity and stereo information of the original sound source transferred to the mixing console.
The ARX DI-PLUS 2 provides a rugged, no-compromise solution to all stereo direct injection and signal
balancing requirements.
 
T E C H N I C A L S P E C I F I C A T I O N S:
Max Input Level
+12 dB Phantom powered
+6 dB Battery powered
Input Impedance 1 Meg Ohm
Max Output Level
+17 dB 10K Ohm load Phantom powered
+12 dB 10K Ohm load Battery powered
+11 dB 600 Ohm load Phantom powered
+12 dB 600 Ohm load Battery powered
Output Impedance 680 Ohms Balanced
Output Signal to Noise
-100 dB unweighted
-104 dB A weighted
Dynamic Range
117 dB 10K Ohm load Phantom powered
112 dB 10K Ohm load Battery powered
111 dB 600 Ohm load Phantom powered
107.5 dB 600 Ohm load Battery powered
Distortion 100 Hz .0018%, 1KHz .0028%, 10KHz .0056%
Frequency Response 20Hz to 20KHz, ± 0.2 dB
Gain through Unit: 6dB (Pad switch out)
Pad Switch: Global -20 dB attenuation
Input and Loop Out Connectors
Insulated jacks (!!!Note that Channel A Input connector switches the unit on
when a plug is inserted. Remove plug when storing to avoid battery drain!!!)
Output Connectors
3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold.
Global Audio Ground (Pin 1) lift switch
Construction
All-steel chassis, fibreglass PCB
Battery Access
Twist connector opens chassis, snap-in battery holder inside.
No tools required

Weight2.72 kg0.50 kg0.80 kg0.29 kg0.60 kg0.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.72 kg
Weight 0.50 kg
Weight 0.80 kg
Weight 0.29 kg
Weight 0.60 kg
Weight 0.60 kg