RADIAL PRO-48 Active Di Box

139.94 incl. GR VAT

Only 5 left in stock (can be backordered)

EAN: 676101036776
Installments calculation
CompareAdd to wishlist Submit Better Price
  • High performance active direct box
  • Increased dynamic range and headroom
  • 48V phantom powered with switching supply
  • Ideal for acoustic guitar and bass
  • High performance active direct box
  • Increased dynamic range and headroom
  • 48V phantom powered with switching supply
  • Ideal for acoustic guitar and bass

 

Read more

  • High performance active direct box
  • Increased dynamic range and headroom
  • 48V phantom powered with switching supply
  • Ideal for acoustic guitar and bass

The Radial Pro48 is a compact high-performance 48V phantom powered active direct box designed specifically for todays high output instruments.

The Pro48’s innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz. This results in natural, uncolored signal that is as good or better than DI boxes costing several times more. The superior performance makes the Pro48 an ideal candidate for use with battery powered active basses and acoustic guitars that tend to overload other direct boxes.

The compact Pro48 is built road-ready with 14 gauge steel throughout. A unique book-end™ design creates a protective zones around the switches and connectors while the internal I-beam construction assures outside stress will not torque the PC board and deteriorate solder connections. A full bottom no-slip pads adds mechanical isolation and electrical insulation to further extend the Pro48’s lifespan.

Exceptional sonic performance, great natural tone and an affordable price tag! The Radial Pro48 truly represents a breakthrough in value.

Weight 0.52 kg

Reviews

There are no reviews yet.

Be the first to review “RADIAL PRO-48 Active Di Box”

Your email address will not be published. Required fields are marked *

Quick Comparison

RADIAL PRO-48 Active Di Box removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removeALPHATON IA-2 INLINE TRANSFORMER XLRf-m W-GROUNDLIFT removeBEHRINGER DI-600P High-Performance Passive Direct Injection Box removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeSTEWART ADB4-4 CH. ACTIVE D.I BOX remove
NameRADIAL PRO-48 Active Di Box removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removeALPHATON IA-2 INLINE TRANSFORMER XLRf-m W-GROUNDLIFT removeBEHRINGER DI-600P High-Performance Passive Direct Injection Box removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeSTEWART ADB4-4 CH. ACTIVE D.I BOX remove
Image
SKUH30RL00009LDI02IA-2E005866275ADB4E
Rating
Price 139.94 incl. GR VAT 58.64 incl. GR VAT 119.04 incl. GR VAT 39.00 incl. GR VAT 73.93 incl. GR VAT 585.13 incl. GR VAT
Stock

Only 5 left in stock (can be backordered)

Only 5 left in stock

In stock

In stock

In stock

Available on backorder

AvailabilityOnly 5 left in stock (can be backordered)Only 5 left in stockIn stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • High performance active direct box
  • Increased dynamic range and headroom
  • 48V phantom powered with switching supply
  • Ideal for acoustic guitar and bass
Content
  • High performance active direct box
  • Increased dynamic range and headroom
  • 48V phantom powered with switching supply
  • Ideal for acoustic guitar and bass
The Radial Pro48 is a compact high-performance 48V phantom powered active direct box designed specifically for todays high output instruments. The Pro48's innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz. This results in natural, uncolored signal that is as good or better than DI boxes costing several times more. The superior performance makes the Pro48 an ideal candidate for use with battery powered active basses and acoustic guitars that tend to overload other direct boxes. The compact Pro48 is built road-ready with 14 gauge steel throughout. A unique book-end™ design creates a protective zones around the switches and connectors while the internal I-beam construction assures outside stress will not torque the PC board and deteriorate solder connections. A full bottom no-slip pads adds mechanical isolation and electrical insulation to further extend the Pro48's lifespan. Exceptional sonic performance, great natural tone and an affordable price tag! The Radial Pro48 truly represents a breakthrough in value.
pdf User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg

Inline Transformer IA-2

The model IA-2 line matching transformers !S designed to properly match a low impedance
signal to a low impedance source. The advantage of "ground lift" switching allows to optmize
hum problems.
 
Technical Data
Frequency response 20 Hz - 20 KHz + 1 dB
Impedance 600 : 600 Ohm
THD K3 50 Hz = 0.5 %
Level < + 6 dBm
Weight 100 g
Dimensions diameter 17 mm, lenght 115 mm
 

Behringer DI-600P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage. It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal. Hook Your Guitar or Amp Up to the PA Be ready for your next gig with the Behringer Ultra-DI DI600P direct box. Designed to send instrument or amplifier signals to the main mixing board, the DI600P is a high-performance passive DI is a useful tool in any gig rig or studio. Dual 1/4" TS jacks are wired in parallel let you plug your instrument into one and use the other as an output to your amp. The balanced XLR mic-level output feeds your mixer a clean and super-flat signal that is true to the source. Sweetwater knows that grounding issues and hum can be a problem at live gigs. The DI600P sports a ground lift switch to kill unwanted ground loops and hum. It also has a filter switch for optimal guitar tone and an instrument/amp switch with a 30dB input level drop. The Behringer Ultra-DI DI600P direct box is an extremely useful tool for any stage rig! Behringer Ultra-DI DI600P Direct Box Features:
  • Compact, high-performance passive direct box
  • Jack input 1/4" TS in and parallel out
  • Gold-plated XLR output / impedance balanced
  • Super-flat frequency output for uncolored sound
  • Switchable filter that optimizes the DI for guitars
  • Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
  • Instruments or amplifier outputs with up to 3,000 watts can be connected directly
  • Offers impedance and signal matching of instruments to mixers
  • Perfect for stage and studio use
  • Ground lift switch eliminates typical ground loop problems
  • Rugged metal case can take the rigors of the road
Get your signal to the board with Behringer\'s Ultra-DI DI600P direct box! Tech Specs
  • Type: Passive DI Box
  • Channels: 1
  • Ground Lift: Yes
  • Inputs: 1 x 1/4"
  • Outputs: 1 x 1/4“, 1 x XLR
  • Height: 1.4"
  • Width: 3.75"
  • Depth: 5"
  • Weight: 0.66 lbs.
  • Manufacturer Part Number: DI600P
DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand-

The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free.

Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.


Key Features
?

Active direct box

?

Allows a hi impedance unbalanced source to directly feed a low impedance balanced input

?

Flat frequency response

?

Connects guitar pickups, microphones or electric instruments to a recording or P.A. console without audio quality loss

?

Internal pad for speaker level input

?

Operates with battery or phantom power

?

Ground lift switch eliminates typical ground loop problems

?

Rugged, road-proof cast alloy chassis

You're serious about getting rid of all that excess noise on stage, but you've got so many line
instruments you don't know where to start. The ADB-4 from Stewart can take care of all your
high impedance problems. The ADB-4 is 4 active direct boxes, all in a module that only takes
up half a space on your keyboard rack. It's a rugged, durable piece of equipment that packs a
lot of DI power.

? Requires phantom power or 9v battery
? Ground lift switch
? Instrument or speaker level switch
? Transformerless
? Can be used with amp up to 400w
? RF shielding

Weight0.52 kg0.70 kg0.10 kg0.30 kg2.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.52 kg
Weight 0.70 kg
Weight 0.10 kg
Weight 0.30 kg
Weight 2.50 kg
Weight 0.50 kg