RAM BUX series – 2×1700 Watt Amplifier

Discontinued

2,406.98 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
  BUX Series ? BUX 3.4Professional Power Amplifier Presentation Power amplification at its best means absolutely linear handling of any complex audio signal. Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability. With these qualities, RAM Audio […]

 

Read more

 

BUX Series ? BUX 3.4
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.

Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 2900W
2x 1750W
2x 970W
5800W
3500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 3500W
2x 2200W
Frequency Response
Power Bandwidth ±0.25dB 20Hz – 20kHz
Phase Response
@ 1watt 20Hz – 20kHz ±15deg
Total Harmonic Distortion
20Hz – 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz – 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.82V
Signal-to-Noise-Ratio
A weighted
No weighting
118dB
106dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 8.5A
Dimensions
W x H x D 483 x 133 x 480 mm
19 x 5.25 x 18.9 in
Weight
Shipping
Net
40.6 Kg – 89.5 Lbs
38 Kg – 83.8 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO
Weight 41.00 kg

Reviews

There are no reviews yet.

Be the first to review “RAM BUX series – 2×1700 Watt Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM BUX series - 2x1700 Watt Amplifier removePOWERSOFT T904 DSP+D Power amplifier 4 x 2000W 4Ohm Dante removeBITTNER AUDIO XR4000-2X2070W-4Ω POWER AMPLIFIER removeQSC CMX2000V Business amplifier 2x2000W RMS @ 4 ohms removeQSC CMX-2000V POWER AMPLIFIER 2x2000W RMS @ 4Ω, 2x2500W RMS @2Ω removeCROWN I-T5000 HD POWER AMPLIFIER 2500W 4Ω remove
NameRAM BUX series - 2x1700 Watt Amplifier removePOWERSOFT T904 DSP+D Power amplifier 4 x 2000W 4Ohm Dante removeBITTNER AUDIO XR4000-2X2070W-4Ω POWER AMPLIFIER removeQSC CMX2000V Business amplifier 2x2000W RMS @ 4 ohms removeQSC CMX-2000V POWER AMPLIFIER 2x2000W RMS @ 4Ω, 2x2500W RMS @2Ω removeCROWN I-T5000 HD POWER AMPLIFIER 2500W 4Ω remove
ImagePowersoft T904 DSP+D Power amplifier 4 x 2000W 4Ohm Dante
SKUSBUX34E018111XR4000010016CMX-2000VI-T5000 HD
Rating
Price 2,406.98 incl. GR VAT 5,116.00 incl. GR VAT 3,707.59 incl. GR VAT2,106.30 incl. GR VAT2,253.94 incl. GR VAT 6,574.84 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.
Content  
BUX Series ? BUX 3.4
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.
Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 2900W
2x 1750W
2x 970W
5800W
3500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 3500W
2x 2200W
Frequency Response
Power Bandwidth ±0.25dB 20Hz - 20kHz
Phase Response
@ 1watt 20Hz - 20kHz ±15deg
Total Harmonic Distortion
20Hz - 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz - 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.82V
Signal-to-Noise-Ratio
A weighted
No weighting
118dB
106dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 8.5A
Dimensions
W x H x D 483 x 133 x 480 mm
19 x 5.25 x 18.9 in
Weight
Shipping
Net
40.6 Kg - 89.5 Lbs
38 Kg - 83.8 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO
Manufacturer POWERSOFT
Warranty 4 Years Gurantee
Channels Four Channel
Resistance ohms 8Ω / 4Ω / 2Ω
DSP Yes
Power (8 ohms/Watt RMS) per channel 1600
Power (4 ohms/Watt RMS) per channel 2000
Power (2 ohms/Watt RMS) per channel 1800
Weight (kg) 7.8

XR Series - Intelligent Power
New Horizons.

A lightweight with enormous power output. Combined with digital signal processing.
That's what we call flexibility! Locally controlled or completely networked.
No matter what the requirements are.
The integrated powerful digital signal processor (DSP) and controller allows
for a troublefree and easy adjustment to any acoustical environment.
Wear-free digital potentiometers, sequential remote power on,
alive contacts for easy supervision, computer controlled monitoring -
 its enless list of useful feature make it the right choice for any installation.
XR - the new definition of Intelligent Power

High Tech SMT Design
Digital Signal Processor
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX / Speakon
High-End Switched Power Supply with Power Factor Correction (not XR4000)
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed low noise fans
Digital wear-free Volume Controls (can be operated manually)
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Paging Input
Monitor Output
SXL Dataport
Perfect Weight-to-Power ratio
3 Years Warranty

Technical Data:
XR 4000:  2x 2800 W @ 2 Ohm
                2x 2070 W @ 4 Ohm
Class:  H
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.02%
Signal-to-Noise Ratio:  < -106 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  750 to 1200 @ 4 Ohm
Cooling:  4 Fans (temp. reg. variable speed)
Weight:  9 kg
Dimensions:  2 RU / 483 x 88 x 454 mm(19" x 3.5" x 17.9“)

Business amplifier 2x2000W RMS @ 4 Ohms, 2x2500W RMS @ 2h, 2x1000W @ 100V, bridged (mono) 2400W RMS @ 4 ohms, 3600W / 100V. It has inputs 3-pin XLR, jack 6,3mm (balanced), output speakon and clamp. It also has settings panel dip switches 10 posts (clip limiter, filters, stereo / parallel inputs, bridge mode). Protections turn on / off muting, triac crowbar on each channel, stable performance regardless of load. 3U / 19 "rackmount. Dimensions (HxWxD) 133x483x400mm - 33,1kg.

 

Characteristics

Power (Stereo Mode):

    2x1050W @ 8Ohm (FTC 20Hz- 20kHz, 0,1% THD)
    2x1100W @ 8Ohm (EIA 1kHz, 0,1% THD)
    2x1600W @ 4Ohm (FTC 20Hz- 20kHz, 0,1% THD)
    2x2000W @ 4Ohm (EIA 1kHz, 1% THD)
    2x2500W @ 2Ohm (EIA 1kHz, 1% THD)
    2x2500W @ 70V (EIA 1kHz, 1% THD)
    2x1000W @ 100V (EIA 1kHz, 1% THD)

Power (Bridge Mode):

    3200W @ 8Ohm (FTC 20Hz- 20kHz, 0,1% THD)
    3600W @ 8Ohm (EIA 1kHz, 0,1% THD)
    5000W @ 4Ohm (EIA 1kHz, 1% THD)
    5000W @ 70V (EIA 1kHz, 1% THD)
    3600W @ 100V (EIA 1kHz, 1% THD)

Signal to Noise, 20Hz-20kHz, 8Ohms:> -100dB

Input sensitivity @ 8Ohms: 1,42V (+5,3 dBu)

Voltage Gain @ 8Ohms: 64x (36dB)

Output Circuitry: 3-tier Class H

Power requirements (230V)

    1/8 power pink noise at 4 ohms: 7A
    1/3 power pink noise at 4 ohms: 13,5A

Distortion (SMPTE-IM):

Stereo Mode Ratings (Both Channels Driven):

    8 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 1050W
    - EIA 1 kHz, 0.1% THD: 1100W
    4 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 1600W
    - EIA 1 kHz, 0.5% THD: 2000W (1% THD)
    2 ohms:
    - EIA 1 kHz, 1% THD: 2500W
    70V Direct Drive:
    - EIA 1 kHz, 1% THD: 2500W
    100V Direct Drive:
    - EIA 1 kHz, 1% THD: 1000W

Bridged Mono Mode Ratings/Specifications:

    8 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 3200W
    - EIA 1 kHz, 0.1% THD: 3600W
    4 ohms:
    - EIA 1 kHz, 1% THD: 5000W
    70V Direct Drive:
    - EIA 1 kHz, 1% THD: 5000W
    100V Direct Drive:
    - EIA 1 kHz, 1% THD: 3600W
    Signal to Noise, 20Hz-20kHz, 0.1% THD, 8 Ohms: > -100dB
    Input Sensitivity @ 8 Ohms: 1.42V (+5.3 dBu)
    Voltage Gain @ 8 Ohms: 64x (36 dB)
    Output Circuitry: 3-tier Class H
    Power Requirements (120V):
    - 1/8 power pink noise at 4 ohms: 13.9A
    - 1/3 power pink noise at 4 ohms: 26.9A
    Power Requirements (230V):
    - 1/8 power pink noise at 4 ohms: 7A
    - 1/3 power pink noise at 4 ohms: 13.5A
    Distortion (SMPTE-IM):

Low weight switching final power amplifier. Power 2X2500W / 4Ω, 2Χ3000W / 2Ω. 5000W bridged 8Ω. New integrated BSS OMNIDRIVE 4bit / 192kHz processor with Cirus Logic SHARC A / D and D / A Converters. Level MAX peak voltage and RMS compressing, limiting. New hi-end FIR and IIR filters, 2sec delay / channel, as well as DSP presets for various speakers. LCD display on the front. USB port on the front for loading firmware and Speakers Tunning presets. Analog inputs with XLR, digital input AES / EBU, ethernet input RJ-45 with TCP / IQ protocol. Advanced 3rd generation power supply that allows the amplifier to operate at any voltage. Cooling circuit with microprocessor control with adjustable speed depending on the temperature. Analog and digital outputs (THRU) XLR. Exits speakon 5-way binding post, ground lift switch. Made of cast aluminum, height 2U rack. Suitable for P.A applications but also permanent installations. Weight 10.5kg

Weight41.00 kg7.8 kg10.00 kg19.00 kg33.10 kg10.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 41.00 kg
Weight 7.8 kg
Weight 10.00 kg
Weight 19.00 kg
Weight 33.10 kg
Weight 10.50 kg