RAM BUX series – 2×1700 Watt Amplifier

Discontinued

2,406.98 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
  BUX Series ? BUX 3.4Professional Power Amplifier Presentation Power amplification at its best means absolutely linear handling of any complex audio signal. Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability. With these qualities, RAM Audio […]

 

Read more

 

BUX Series ? BUX 3.4
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.

Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 2900W
2x 1750W
2x 970W
5800W
3500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 3500W
2x 2200W
Frequency Response
Power Bandwidth ±0.25dB 20Hz – 20kHz
Phase Response
@ 1watt 20Hz – 20kHz ±15deg
Total Harmonic Distortion
20Hz – 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz – 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.82V
Signal-to-Noise-Ratio
A weighted
No weighting
118dB
106dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 8.5A
Dimensions
W x H x D 483 x 133 x 480 mm
19 x 5.25 x 18.9 in
Weight
Shipping
Net
40.6 Kg – 89.5 Lbs
38 Kg – 83.8 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO
Weight 41.00 kg

Reviews

There are no reviews yet.

Be the first to review “RAM BUX series – 2×1700 Watt Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM BUX series - 2x1700 Watt Amplifier removeINTERM R-150 PLUS AMPLIFIER 2X75W removeYAMAHA PC-9501N Power Amplifier 2x1050W removePOWERSOFT DUECANALI 1604 DSP+D 1600W / 2-channel Flexible Amplifier with DSP and Dante removeYAMAHA T-5N Power Amplifier 2x1350W removeMC2 Audio T3500 POWER AMPLIFIER 2x1850 watt 4ohm remove
NameRAM BUX series - 2x1700 Watt Amplifier removeINTERM R-150 PLUS AMPLIFIER 2X75W removeYAMAHA PC-9501N Power Amplifier 2x1050W removePOWERSOFT DUECANALI 1604 DSP+D 1600W / 2-channel Flexible Amplifier with DSP and Dante removeYAMAHA T-5N Power Amplifier 2x1350W removeMC2 Audio T3500 POWER AMPLIFIER 2x1850 watt 4ohm remove
ImagePOWERSOFT DUECANALI 1604 DSP+D 1600W / 2-channel Flexible Amplifier with DSP and Dante
SKUSBUX34R-150 PLUSH060.00033E017352H060.00040T3500
Rating
Price 2,406.98 incl. GR VAT 459.00 incl. GR VAT 2,355.00 incl. GR VAT 2,352.00 incl. GR VAT 3,879.00 incl. GR VAT 2,351.03 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Only 5 left in stock

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 5 left in stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

The ability to implement any configuration with ease makes the Duecanali series extremely flexible. Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.

The Duecanali 1604 DSP+D is designed to work with Lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized.

A fully integrated state-of-the-art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions in unique Powersoft style, the DSP hardware and ArmoníaPlus software enable compliance with IEC 60849 for the crucial requirements of sound systems for emergency purposes.

Content  
BUX Series ? BUX 3.4
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.
Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 2900W
2x 1750W
2x 970W
5800W
3500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 3500W
2x 2200W
Frequency Response
Power Bandwidth ±0.25dB 20Hz - 20kHz
Phase Response
@ 1watt 20Hz - 20kHz ±15deg
Total Harmonic Distortion
20Hz - 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz - 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.82V
Signal-to-Noise-Ratio
A weighted
No weighting
118dB
106dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 8.5A
Dimensions
W x H x D 483 x 133 x 480 mm
19 x 5.25 x 18.9 in
Weight
Shipping
Net
40.6 Kg - 89.5 Lbs
38 Kg - 83.8 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N
Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange,
and superbly defined highs. They also deliver fast response and exceptional stability even in the face
of serious power supply limitations. Refinements throughout this expanded five-model lineup make
these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Ισχύς 2 x 1050 Watt / 8Ω RMS, 2 x 1650 Watt / 4Ω RMS, 3000 Watt / 8Ω bridge RMS. Weight: 13 κιλά. 
 

Power supply

  • Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
  • Patented output filter with ripple cancellation network
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
  • Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket

Protections

Fully protected circuit design with:
  • Ac protection: shut down power supply when AC mains voltage is outside the operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continuous variable speed fan, front to back airflow
  • Temperature forecast with LCD traced historical behavior

General

  • Fixed frequency switchmode output stage for high grade sound accuracy
  • Compact size – all models only 1 RU for reduced rack cost and space
  • Light weight – for easier racking and shipping: 7 kg (15.4 lbs)
  • Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
  • Remotely switchable double input (main and aux) per channel

Loudspeaker system configuration

  • Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
  • Switchable 35Hz / 70Hz high pass filter per channel
  • Mixed configuration with Lo-Z/Hi-Z systems possible
  • Bridged mode low impedance per channel pair

Alarms and GPI/O

  • NC/NO contacts per channel for alarm notifications
  • Remote ON/OFF switch
  • Remote VCA control per channel

Digital Signal Processing

  • TI C6000 DSP platform
  • AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
  • Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
  • Delay up to 100 ms for time alignment
  • Active DampingControl™ for cable compensation
  • Peak, RMS voltage, RMS current, TruePower™ limiters

Remote Control & Monitoring

Via software:
  • Control and diagnostics monitoring via ArmoníaPlus
  • Dedicated WebApp
Via Hardware:
  • Attenuation (from 0dB to 26dB)
  • High-pass filters (35Hz, 70Hz)
  • Lo-Z/Hi-Z/70V/100V output selection
  • Adjustable gain (from 26dB to 35 dB)
 
General
Output power per Channel
Output power per Channel 1000 W @ 2 Ω 800 W @ 4 Ω 800 W @ 8 Ω
Bridge mode 2000 W @ 4 Ω 1600 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage@8 Ω 115 Vpeak
Current 45 Apeak
AC main power
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V – 264 V
Power consumption / current draw
Idle 115 V: 23 W – 0.34 A 230 V: 23.3 W – 0.21 A
1/8 of max output power @ 4 Ω 115 V: 267 W – 2.5 A 230 V: 274 W – 1.5 A
THERMAL
Operating temperature range 0° – 45° C – 32° – 113° F
Thermal dissipation*
Idle 115 V: 78 BTU/h 230 V: 79 BTU/h
1/8 of max output power @ 4 Ω 115 V: 229 BTU/h 230 V: 251 BTU/h

Model T5n
Product Type Power Amplifier
Output Power (W) 1kHz THD+N=1% (120V)
2Ω per channel 2500
4Ω per channel 2200
8Ω per channel 1350
4Ω bridge 5000
8Ω bridge 4400
Output Power (W) 1kHz 20mS burst (120V)
2Ω per channel 3400
4Ω per channel 2200
8Ω per channel 1350
4Ω bridge 6800
8Ω bridge 4400
SN ratio (20Hz-20kHz) 107dB
THD+N 20Hz-20kHz, Half Power RL-4Ω, 8Ω
Intermodulation Distortion 60Hz: 7kHz, 4:1, Half Power 0.1%
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (Max) 0dB
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (TYP) 0dB
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (MIN) 6dB
Channel Separation (Half Power RL=8Ω,1kHz Att. max input 600Ω shunt) 70dB
Residual Noise Att,min 20Hz-20kHz(DIN AUDIO) -70dBu
Damping factorRL=8Ω 1kHz 800
Voltage Gain Att.max 26dB
Maximum Input Voltage +24dBu
Input Impedence 20kΩ (balance) 10kΩ (unbalance)
Controls Specifications
Front Panel POWER switch(push on/push off) attenuator (31 position) x2
Rear Panel MODE switch (STEREO/BRIDGE/PARALLEL) X1; HPF switch (20Hz/OFF 12dB/oct) x1; AMP ID switch (6PDIP)x1
Connectors Specifications
Input XLR-3-31 type/ch; Euroblock connector (balance)/ch
Output SPEAKON/ch, 5way biding postx1
Date Port RJ45x2
Indicators Specifications
Power/Standby x1 (Green/Orange)
Remote x1 (Green)
Protection x1 (Red)
Temp x1 (Red) heatsink temp 85°C
Signal x2 (Green)
Mute x2 (Red)
Clip/Limit x2 (Red)
Load protection POWER switch on/off mute; DC-fault: power supply shutdown / do not return automatically
Cooling Variable-speed fan: x2
Power requirements 120V/60Hz
Weight 14.0 kg
Dimensions (W x H x D) 480 x 88 x 456mm (2U)

Number of Channels: 2

Output Power: (per channel)

8 ohms     1000W
4 ohms  1850W
2 ohms  N/A


Output Power: (bridged)

8 ohms 3700W
4 ohms N/A


THD%: (@1dB below max output)

@ 1kHz 

Weight41.00 kg7.20 kg13.00 kg7 kg14.00 kg25.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 41.00 kg
Weight 7.20 kg
Weight 13.00 kg
Weight 7 kg
Weight 14.00 kg
Weight 25.00 kg