RAM BUX series – 2×750 Watt Amplifier

Discontinued

1,468.95 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
  BUX Series ? BUX 1.6Professional Power Amplifier Presentation Power amplification at its best means absolutely linear handling of any complex audio signal. Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability. With these qualities, RAM Audio […]

 

Read more

 

BUX Series ? BUX 1.6
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.

Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 1200W
2x 750W
2x 475W
2400W
1500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 1600W
2x 1000W
Frequency Response
Power Bandwidth ±0.25dB 20Hz – 20kHz
Phase Response
@ 1watt 20Hz – 20kHz ±15deg
Total Harmonic Distortion
20Hz – 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz – 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.15V
Signal-to-Noise-Ratio
A weighted
No weighting
113.5dB
101dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 4.5A
Dimensions
W x H x D 483 x 89 x 442 mm
19 x 3.5 x 17.4 in
Weight
Shipping
Net
20.8 Kg – 45.9 Lbs
20 Kg – 44.1 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO
Weight 21.00 kg

Reviews

There are no reviews yet.

Be the first to review “RAM BUX series – 2×750 Watt Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM BUX series - 2x750 Watt Amplifier removeQSC GX-7 POWER AMPLIFIER 2x1000W RMS @ 4Ω, 2x725W RMS @ 8Ω removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeRCF ED 1100: 1100 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIER removeINTERM L-1800 AMPLIFIER 2X600W removeQSC GX-5 POWER AMPLIFIER 2x700W RMS @ 4Ω, 2x500W RMS @ 8Ω remove
NameRAM BUX series - 2x750 Watt Amplifier removeQSC GX-7 POWER AMPLIFIER 2x1000W RMS @ 4Ω, 2x725W RMS @ 8Ω removeBITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER removeRCF ED 1100: 1100 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIER removeINTERM L-1800 AMPLIFIER 2X600W removeQSC GX-5 POWER AMPLIFIER 2x700W RMS @ 4Ω, 2x500W RMS @ 8Ω remove
Image
SKUSBUX16010002XR2000ED1100L-1800010001
Rating
Price 1,468.95 incl. GR VAT 695.00 incl. GR VAT 2,814.80 incl. GR VAT 716.10 incl. GR VAT 1,186.00 incl. GR VAT 589.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content  
BUX Series ? BUX 1.6
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.
Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 1200W
2x 750W
2x 475W
2400W
1500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 1600W
2x 1000W
Frequency Response
Power Bandwidth ±0.25dB 20Hz - 20kHz
Phase Response
@ 1watt 20Hz - 20kHz ±15deg
Total Harmonic Distortion
20Hz - 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz - 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.15V
Signal-to-Noise-Ratio
A weighted
No weighting
113.5dB
101dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 4.5A
Dimensions
W x H x D 483 x 89 x 442 mm
19 x 3.5 x 17.4 in
Weight
Shipping
Net
20.8 Kg - 45.9 Lbs
20 Kg - 44.1 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO

- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon(R) combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1“/257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX7 is only 15.5 lbs (7 kg)
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail(TM) automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
- 230V 16.5 lbs (7.5 kg)

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The 2U amplifier provides 2x550W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 550 Watt rms 
Power output stereo 8Ω:2 x 265 Watt rms 
Power output bridged 8Ω:1100 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Thermal, direct current, RFI, short circuit, transformer protection 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:10 A 
Power Consumption:2200 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:15 / 33.06 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:475 / 18.07 mm/inch 
Shipping Weight:17 / 37.47 Kg/Lbs

 

L1800 600W-600W 4ohm (360W-360W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

- Signal to Noise (20 Hz - 20 kHz): 100 dB
- Input Sensitivity: 1.2 Vrms
- Voltage Gain (8 Ohms): 34.4 dB
- Output Circuitry: 2-tier Class H
- Power Requirements: 6A
- Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
- Dynamic Headroom (4 Ohms): 2 dB
- Damping Factor: 100
- Input Impedance: Greater than 20k (balanced)
- Maximum Input Level: +24 dB (16 Vrms)
- Input Connectors (each channel): 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
- Output Connectors (each channel): Speakon, 1/4-inch, Binding Posts
- Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults
- Rear Panel Controls: Full Range / Crossover switch
- Dimensions (H x W x D): 3.5 x 19 x 10.1 inches (89 mm x 483 mm x 257 mm)
- Weight: 26 lbs (12 kg)

Front Panel Controls and Indicators:
- Gain controls, 21 detents
- Red Clip LEDs, proportional, 0.1% THD threshold
- Green Signal LEDs, threshold -35 dB
- Blue Power LED, AC on


Stereo Mode:
- 8 Ohms / both channels driven: 500 Watts
- 8 Ohms / single channel driven: 600 Watts
- 4 Ohms / both channels driven: 700 Watts
- 4 Ohms / single channel driven: 850 Watts

Distortion:
- 8 Ohms: less than 0.05%
- 4 Ohms: less than 0.1%

Dimensions and Weight in Packaging
Shipping Weight: 31 lbs
Shipping Dimensions: 24 x 15 x 7 in

Weight21.00 kg7.00 kg9.00 kg17.00 kg15.60 kg12.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 21.00 kg
Weight 7.00 kg
Weight 9.00 kg
Weight 17.00 kg
Weight 15.60 kg
Weight 12.60 kg