Content |
4PRO 3002-SMA is designed with a specific goal: build a high power, professional active stage monitor with symmetric transducers configuration maintaining the lowest possible profile and weight. The result is a first class stage monitor with incredible amplifier power, high quality neodymium transducers, very compact size cabinet. The voice is accurate and deep, the sound transparent in the mids and extremely accurate at very high frequencies. The 40x60 horn provides a smooth and even coverage for the performer and a very low side emission. Very good feedback immunity. RCF 4PRO 3002-SMA is an active, controlled dispersion 2 way symmetric stage monitor. It integrates a high power 400 watt amplifier, a complete electronic processor section and RCF low distortion, high power neodymium transducers. The system is unique in its class for output and vocal intelligibility. The symmetric transducers configuration guarantee the sound coherency between left and right side of the speaker. The new 12? neodymium woofer is the result of the latest refinement in year of RCF experience in compact speakers. Features a 3 ? voice coil, a massive outside ring neodymium magnet, very high efficiency and controlled mid-bass reproduction. The compression driver uses a new 2.5? pure titanium dome featuring a complex geometry suspension and Direct Drive Coil. This innovative design is powered from a high flux neodymium magnet ring offering a very open and natural midrange sound with extreme precision in high frequency reproduction. A generous 2 step class H TAED design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design. The input section presents a XLR input connector that is switchable from microphone to line levels. A master volume control and a useful XLR loop through link guarantee the best versatility. The processor section includes active crossover, system equalisation, transducers phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs. All the system is housed in a strong , very lightweight, baltic birch plywood enclosure. The system is protected from a strong, powder coated, metal grille. The cabinet features an ergonomic side aluminum handle for easy transportation.
FEATURES: 400 watt Monolithic bi-amplification. 350 watt low frequency and 50 watt high frequency power. 130 dB max SPL. Controlled dispertion, 40 x 60 low distortion, mid-high horn assembly. 12? high power neodymium woofer, 75mm inside/outside aluminium coil. 2? neodymium, titanium dome, high frequency driver. Electronic equalization, phase alignment, limiter and protection. Line combo XLR/Jack input, XLR signal output. Baltic birch cabinet with 1 side handles for easy transportation and positioning. Optional remote control. |
12” active coaxial monitor
350W class D+ 65W class AB
FR: 60Hz-20kHz
Max SPL: 121dB
Input level: LINE -6dBu
12” coaxial woofer with 1” driver
Protection: Thermal/Convection fan/Overload/limiter/compression
The INVoTONE DSX series is a brand new cabinet line in the premium segment. The speakers are characterized by their accurate and balanced sound. Even very high sound pressure levels are reached. The speakers are comparable in every respect with high-priced branded products, just not in the price! In addition to the acoustic and technical qualities, this series is also mechanically equipped with all the professional features that are common in this segment. "- Monitor and Coaxial 12" subwoofers up to 2x15 "2-way floorstanding speaker and a 18" subwoofer Currently, our product range includes compact 12 arrived.
Power
| 350Watt RMS Biamp | Frequency range (-10dB) | 60Hz-20kHz | Maximum SPL @ 1m | 121dB | Radiation (HxV) | 70 ° x 70 ° | Components | 12 "woofer, 1" HT-driver coaxial system | Connectors | INPUT jack combo / OUTPUT XLR male balanced link. | Input Level | Line -6dBu | Control switches | Volume Control, Ground Lift, monitor / FOH preset switchable ON / OFF | Protection circuits | temperature controlled fan, limiter, compressor | Housing | MDF with durable black textured lacquer, metal front grille, rubber feet, wooden handles, Hochständeflansch | Dimensions | (HxWxD) 313mm x 393mm x 513mm | Weight | 14KG |
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability. Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
800 Watt Peak, 400 Wat RMS 129 dB max SPL 45 Hz - 20 kHz frequency response 12" Woofer, 2.5" voice coil 1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz Max SPL: 129 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression Driver: 1“, 1.4" voice coil Woofer: 12“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal Input connectors: Jack-XLR male Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz Protections: RMS limiter, HF Limiter: Fast limiter
Amplifier Specifications
Total power: 800 W PEAK High frequencies:200 W PEAK Low frequencies: 600 W PEAK Total power: 400W RMS High frequencies:100 W RMS Low frequencies: 300 W RMS
Cabinet Specs
Cabinet Material: Baltic birch Handles: 1 side Pole Mount/Cap: Yes Colour: Black
Size/Weight
Height: 318/12.51 mm/inch Width: 594/23.38 mm/inch Depth: 400/15.74 mm/inch Net Weight: 18/39.68 kg/lbs |
The NX M15-A is a high-efficiency, high output, two-way, wide dispersion active sound reinforcement system.
It benefits from the integration of 750 Watt Digipro digital amplifier power, control electronics and premium transducers components such as the 15” neodymium woofer with 3.5” high power voice coil.
The NX M15-A is the perfect balance between size and performance and it is smaller and lighter without compromising on performance.
Features |
---|
750 Watt Digipro digital amplifier | 131 dB max spl | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | 15" woofer, high power neodymium 3.5" voice coil | 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | Max SPL: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Compression Driver: | 1" neo, 1.75" v.c. | | Woofer: | 15" neo, 3.5" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1700 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, side / floor, contour | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / forced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | 6 x fly tracks | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 736 / 28.97 mm/inch | | Width: | 430 / 16.92 mm/inch | | Depth: | 395 / 15.55 mm/inch | | Net Weight: | 23.8 / 52.46 Kg/Lbs |
|
LD Systems Stinger MON121AG2 The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications. The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz. Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting. The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function. The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°. - Type: active
- Woofer size: 12“
- Woofer size: 304 mm
- Woofer type: coaxial speaker
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2
- Woofer voice coil: 50.8 mm
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class A / B
- Dispersion angle (H x V): 75° x 75°
- Power output (RMS): 250 W
- Power output (peak): 500 W
- Frequency response: 80 Hz - 20 kHz
- Crossover frequency: 2200 Hz
- SPL (1 W/1 m): 100 dB
- Max. SPL (continuous): 116 dB
- Max. SPL (peak): 124 dB
- Protection: limiter, short-circuit
- Controls: Volume, On / Off
- Indicators: Power, Signal, Limit
- Number of line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Number of line outputs: 1
- Line output connectors: XLR
- Power supply: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm plywood
- Cabinet type: bass reflex
- Monitor angle: 35°
- Width: 440 mm
- Depth: 360 mm
- Height: 514 mm
- Features: Ergonomic insert handles
|
StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.
The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.
Cabin Type: | Wooden, 3-way | Monitor Use: | Yes | Amplifier: | 1,400‐watt | LF/MF, Woofer: | 2x10” | HF, Horn: | 1” exit compression driver | DSP Processor: | Yes | Frequency Response: | 47 Hz to 18 kHz | Dimensions: | 312 mmx861 mmx 312 mm | Weight: | 26.1 kg | Color: | Black |
|
Reviews
There are no reviews yet.