Content |
RCF ART322 loudspeaker
- 420 watt Monolithic bi-amplification, 350 watt low frequency and 70 watt high frequency power - 128 dB SPL peak - Wide dispersion, 90° x 60° low distortion, constant directivity horn - 12? high power woofer, 75mm inside/outside aluminium coil - 2? neodymium, titanium dome, high frequency driver - Electronic equalization, phase alignment, limiter and protection - Mic/Line combo XLR/Jack input, XLR signal output - 2 side handles and 1 ergonomic top handle for easy transportation and positioning - Four M10 fly points and built in pole mount adaptor - Optional Infrared remote control for volume, mute and Eq adjustment
Specifications:
Active 2-way speaker
ACOUSTICAL SPECIFICATIONS
Frequency response 45-20Khz
Max SPL 128dB
Sensitivity 1w/1m -
Coverage angle 90x60
Compression driver neo2“
Midrange -
Woofer 12“
Power handling -
INPUT SECTION
Input signal bal/unbal
Input connector jack/xlr
Output signal connector xlr
Input sensitivity 0dBu
Mic. input sensitivity -40dBu
PROCESSOR SECTION
Crossover frequencies 1200Hz
Selectable high pass output -
Protections DC/short cir.
Limiter fast limiter
Master volume yes
Phase switch -
Music/Voice eq yes
Remote control option yes
AMPLIFIER
Nominal power 400Watt
High frequencies ab/50Watt
Mid frequencies -
Low frequencies H350Watt
Cooling Convenction
PHISICAL SPECIFICATIONS
Height 680
Width 405
Depth 345
Weight 23Kg
Cabinet Composite PP
Hardware 4 M10 flying points
Handles 2 side, 1 top
Pole Mount / Cap yes
Colour Anthracite grey |
Chassis Size 304.8 mm (12“) Color Black Color White Directivity Index 11.1 dB Input Connections Four-pin Speakon (2) Speaker Type Fullrange Speaker Type Mid-High Speaker Type Two-Way Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover Yes Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 131 dB Coverage (Nominal -6 dB) H° 65 ° Coverage (Nominal -6 dB) V° 65 ° System Power Handling (Continuous/Program/Peak) 300 Watts LF Transducer DL12BFH HF Transducer DH2010 Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6 Ω Flying Yes Outdoor No Height 586 mm (23.07“) Width 429 mm (16.89“) Depth 312 mm (12.28“) Weight Net 14.5 kg (31.97 lbs) |
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package. It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications. The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability. It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1 |
Dual 12-inch two-way with 700 watts continuous, 2100 watts peak power handling. BIampable with 600 watts/4ohm LF and 75 watts 8ohm HF. DH7 3-inch voice coil titanium compression driver coupled with 75°x50° asymmetric CD horn aimed downward 10° . Weight: 35kg Measurements: 99x39x37,5cm | The Electro-Voice ZX3 offers an unprecedented level of lightweight 12-inch two-way loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, ZX3 continues the groundbreaking innovation of the Electro-Voice DVX woofer program, joining the ranks of EVs ZX series between the 8-inch ZX1 and the 15-inch ZX5.
When it comes to problem/solution versatility, ZX3 is truly in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall/ceiling mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter, allow ZX3 to be easily and precisely configured in multiple box arrays, mounted on truss or tripods, deployed as monitors, or used as system mains with a subwoofer.
Housed in a stylish yet rugged injection molded enclosure, ZX3 shares the same functionality as the larger ZX5, with 90° x 50° or 60° x 60° horn dispersion patterns, 45° or 55° monitor angles, passive or bi-amp operation, and seven M8 rigging points. ZX3 is available in a weatherized version and in either black or white finish. The optional HDC-3 heavy duty stackable cover is also available.
Specifications
Frequency Response (-3dB) |
58 - 15000 Hz |
Frequency Response (-10dB) |
48 - 20000 Hz |
Sensitivity 1W/1m |
97 dB |
System Power Handling (continuous/program/peak) |
600/1200/2400 Watts |
Low Frequency Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
High Frequency Power Handling (continuous/program/peak) |
40/80/160 Watts |
LF Transducer |
DVX3121 |
HF Transducer |
ND2 |
Enclosure Material |
Polypropylene |
Color |
Black |
Outdoor |
Yes |
Speaker Type |
Fullrange |
Weight Net |
19.8 kg ( 43.65 lbs ) |
|
Reviews
There are no reviews yet.