Content |
RCF ART322 loudspeaker
- 420 watt Monolithic bi-amplification, 350 watt low frequency and 70 watt high frequency power - 128 dB SPL peak - Wide dispersion, 90° x 60° low distortion, constant directivity horn - 12? high power woofer, 75mm inside/outside aluminium coil - 2? neodymium, titanium dome, high frequency driver - Electronic equalization, phase alignment, limiter and protection - Mic/Line combo XLR/Jack input, XLR signal output - 2 side handles and 1 ergonomic top handle for easy transportation and positioning - Four M10 fly points and built in pole mount adaptor - Optional Infrared remote control for volume, mute and Eq adjustment
Specifications:
Active 2-way speaker
ACOUSTICAL SPECIFICATIONS
Frequency response 45-20Khz
Max SPL 128dB
Sensitivity 1w/1m -
Coverage angle 90x60
Compression driver neo2“
Midrange -
Woofer 12“
Power handling -
INPUT SECTION
Input signal bal/unbal
Input connector jack/xlr
Output signal connector xlr
Input sensitivity 0dBu
Mic. input sensitivity -40dBu
PROCESSOR SECTION
Crossover frequencies 1200Hz
Selectable high pass output -
Protections DC/short cir.
Limiter fast limiter
Master volume yes
Phase switch -
Music/Voice eq yes
Remote control option yes
AMPLIFIER
Nominal power 400Watt
High frequencies ab/50Watt
Mid frequencies -
Low frequencies H350Watt
Cooling Convenction
PHISICAL SPECIFICATIONS
Height 680
Width 405
Depth 345
Weight 23Kg
Cabinet Composite PP
Hardware 4 M10 flying points
Handles 2 side, 1 top
Pole Mount / Cap yes
Colour Anthracite grey |
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package. It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications. The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability. It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black This item is BLACK. The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker. • 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications • High output, 131dB SPL capacity • Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor • 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil • Rugged, high-tech polypropylene enclosure • 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B
Active or Passive |
Passive |
Frequency Response |
-10dB:48-20,000Hz |
Power Capacity |
600W |
Maximum Sound Pressure Level (SPL) |
131dB |
Nominal Sensitivity |
97dB |
Impedance |
8 Ohms |
Crossover |
2KHz |
Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
Enclosure Material |
Polypropylene Structural Foam |
Input Connections |
Neutrik Speakon NL4\'s x 2 |
Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
Weight |
43.7 lbs (19.8 kg) |
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, λευκού χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 200 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
|
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
Reviews
There are no reviews yet.