RCF ART 715-A MK5 1400W, 15″, 1,75″, ACTIVE 2-WAY SPEAKER

706.79 incl. GR VAT

Available on backorder

EAN: 8024530021535
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: ART 715-A MK5 Category:
  • 130 dB Max SPL
  • 1400 WATT 2-way peak power
  • 90° x 60°, Wide dispersion constant directivity horn
  • Innovative DSP Processing
  • 1.75″ Compression Driver
  • 15″ Woofer
  • FiRPHASE Technology
  • XBOOST Low Frequencies Enhancer
  • 130 dB Max SPL
  • 1400 WATT 2-way peak power
  • 90° x 60°, Wide dispersion constant directivity horn
  • Innovative DSP Processing
  • 1.75″ Compression Driver
  • 15″ Woofer
  • FiRPHASE Technology
  • XBOOST Low Frequencies Enhancer

 

Read more

ART 715-A MK5 is a unique product in its category. The 1.75″ compression driver offers unique vocal clarity and sound projection. The 15” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections
Powerful Class D Amplifiers
RCF’s Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. ART 7 amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the ART 7 amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.
Superior Transducers
Lightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.
High Frequencies
The new 1.75″ compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.
Low Frequencies
Low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 7.
Responsive Image
Experience The Depths of Sound
XBoost unlocks the profound low frequencies concealed within ART speakers. With a simple activation from the speaker’s rear panel, immerse yourself in a rich tapestry of bass that pounds with exceptional clarity and control. Whether you’re seeking subtle background music or an enriched sonic experience for your mix, XBoost delivers an astonishing perception of deepened bass, ensuring that every note retains its pristine essence and keeping the woofer excursion under control.
Responsive Image
Your Ideal Stage Partner
The ART 7 speakers are the perfect choice for musicians and sound provider alike.
Their cabinets are molded from a proprietary polypropylene composite engineered to quell vibrations, even at the highest volume levels. This translates to exceptional reliability and resilience under rigorous stage conditions.

 

New perspective on linearity
RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

Responsive Image

Bring ART With You
The sturdy, ergonomic cabinet is easy to carry, thanks to either the handle at the top or the practical handles on both sides.
The base of each speaker includes a steel pole socket for mounting on a stand or on a subwoofer pole.
Stability and safety are assured. The rear of the cabinet is shaped to also be used as a floor monitor.
Internal reinforcement prevents any deformation of the cabinet.

 

 

  • Specifications:

    • Acoustical Specs:
    • Frequency Response: 45 Hz ö 20000 Hz
    • Max SPL @ 1m: 130 dB
    • Horizontal coverage angle: 90°
    • Vertical coverage angle: 60°

      Transducers:

    • Compression Driver: 1 x 1.0″, 1.75″ v.c
    • Woofer: 15″, 2.5″ v.c

      Input/Output:

    • Input signal: bal/unbal
    • Input connectors: XLR, Jack
    • Output connectors: XLR
    • Input sensitivity: -2 dBu/+4 dBu
    • Mic. Input Sensitivity: -32 dBu

      Processor:

    • Crossover Frequencies: 1600
    • Protections: Thermal, RMS
    • Limiter: Soft Limiter
    • Controls: Volume, Boost, MIC/Line

      Power:

    • Total Power: 1400 W Peak
    • High frequencies: 400 W Peak
    • Low frequencies: 1000 W Peak
    • Cooling: Convection
    • Connections: VDE

      Physical Specs:

    • Hardware: 2 x M10
    • Handles: 1 on top, 1 each side
    • Pole mount/Cap: Yes
    • Color: Black

      Dimensions:

    • Height: 708 mm / 27.87 inches
    • Width: 437 mm / 17.2 inches
    • Depth: 389 mm / 15.31 inches
    • Weight: 19.6 kg / 43.21 lbs

      Shipping Dimsneions:

    • Package Height: 750 mm / 29.53 inches
    • Package Width: 500 mm / 19.69 inches
    • Package Depth: 440 mm / 17.32 inches
    • Package Weight: 23 kg / 50.71 lbs
  • Item Includes:

    • 1x VDE power cord
Weight 24 kg

Reviews

There are no reviews yet.

Be the first to review “RCF ART 715-A MK5 1400W, 15″, 1,75″, ACTIVE 2-WAY SPEAKER”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF ART 715-A MK5 1400W, 15", 1,75", ACTIVE 2-WAY SPEAKER removeELECTRO VOICE ELX115P POWERED LOUDSPEAKER 400W removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeBEHRINGER B215D Active Speaker 345W RMS removeQSC KW152 2 WAY ACTIVE LOUDSPEAKER 15'' 1000 W Class D removeSAMSON dB500a Active 2-Way Speaker 500 Watts remove
NameRCF ART 715-A MK5 1400W, 15", 1,75", ACTIVE 2-WAY SPEAKER removeELECTRO VOICE ELX115P POWERED LOUDSPEAKER 400W removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeBEHRINGER B215D Active Speaker 345W RMS removeQSC KW152 2 WAY ACTIVE LOUDSPEAKER 15'' 1000 W Class D removeSAMSON dB500a Active 2-Way Speaker 500 Watts remove
ImageRCF-ART-715A-MK5 full range loudspeaker 700w artsound
SKUART 715-A MK5E002993VP 7315-DP64PE005240010117dB500a
Rating
Price 706.79 incl. GR VAT 885.00 incl. GR VAT 8,325.00 incl. GR VAT 365.00 incl. GR VAT 1,799.00 incl. GR VAT 566.69 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 130 dB Max SPL
  • 1400 WATT 2-way peak power
  • 90° x 60°, Wide dispersion constant directivity horn
  • Innovative DSP Processing
  • 1.75" Compression Driver
  • 15" Woofer
  • FiRPHASE Technology
  • XBOOST Low Frequencies Enhancer
ContentART 715-A MK5 is a unique product in its category. The 1.75" compression driver offers unique vocal clarity and sound projection. The 15” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections
Powerful Class D Amplifiers
RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. ART 7 amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the ART 7 amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.
Superior Transducers
Lightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.
High Frequencies
The new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.
Low Frequencies
Low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 7.
Responsive Image
Experience The Depths of Sound
XBoost unlocks the profound low frequencies concealed within ART speakers. With a simple activation from the speaker's rear panel, immerse yourself in a rich tapestry of bass that pounds with exceptional clarity and control. Whether you're seeking subtle background music or an enriched sonic experience for your mix, XBoost delivers an astonishing perception of deepened bass, ensuring that every note retains its pristine essence and keeping the woofer excursion under control.
Responsive Image
Your Ideal Stage Partner
The ART 7 speakers are the perfect choice for musicians and sound provider alike.
Their cabinets are molded from a proprietary polypropylene composite engineered to quell vibrations, even at the highest volume levels. This translates to exceptional reliability and resilience under rigorous stage conditions.
 
New perspective on linearity
RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.
Responsive Image
Bring ART With You
The sturdy, ergonomic cabinet is easy to carry, thanks to either the handle at the top or the practical handles on both sides.
The base of each speaker includes a steel pole socket for mounting on a stand or on a subwoofer pole.
Stability and safety are assured. The rear of the cabinet is shaped to also be used as a floor monitor.
Internal reinforcement prevents any deformation of the cabinet.
   
  • Specifications:
    • Acoustical Specs:
    • Frequency Response: 45 Hz ö 20000 Hz
    • Max SPL @ 1m: 130 dB
    • Horizontal coverage angle: 90°
    • Vertical coverage angle: 60° Transducers:
    • Compression Driver: 1 x 1.0", 1.75" v.c
    • Woofer: 15", 2.5" v.c Input/Output:
    • Input signal: bal/unbal
    • Input connectors: XLR, Jack
    • Output connectors: XLR
    • Input sensitivity: -2 dBu/+4 dBu
    • Mic. Input Sensitivity: -32 dBu Processor:
    • Crossover Frequencies: 1600
    • Protections: Thermal, RMS
    • Limiter: Soft Limiter
    • Controls: Volume, Boost, MIC/Line Power:
    • Total Power: 1400 W Peak
    • High frequencies: 400 W Peak
    • Low frequencies: 1000 W Peak
    • Cooling: Convection
    • Connections: VDE Physical Specs:
    • Hardware: 2 x M10
    • Handles: 1 on top, 1 each side
    • Pole mount/Cap: Yes
    • Color: Black Dimensions:
    • Height: 708 mm / 27.87 inches
    • Width: 437 mm / 17.2 inches
    • Depth: 389 mm / 15.31 inches
    • Weight: 19.6 kg / 43.21 lbs Shipping Dimsneions:
    • Package Height: 750 mm / 29.53 inches
    • Package Width: 500 mm / 19.69 inches
    • Package Depth: 440 mm / 17.32 inches
    • Package Weight: 23 kg / 50.71 lbs
  • Item Includes:
    • 1x VDE power cord
Case Material    9-ply, 15mm Plywood, Internally Braced, with Texured Paint Frequency Response (-3 dB)    56 Hz - 18 k Hz Frequency Response (-10 dB)    44 Hz - 20 k Hz Max. SPL/1m (calc)    134 dB Coverage (Nominal -6 dB) H°    90 ° Coverage (Nominal -6 dB) V°    50 ° LF Transducer    (1) EVS-15K, 381mm (15”) Woofer HF Transducer    DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver Crossover Frequency    1.7 k Hz Connector Type    (2) XLR/TRS Combo Jacks, (1) Stereo RCA, (1) XLR Link Output Grill    18GA Steel with Black Powdercoat Height    708 mm (27.87“) Width    432 mm (17.01“) Depth    382 mm (15.04“) Weight Net    24.3 kg (53.57 lbs) Shipping Weight    29.5 kg (65.04 lbs)

JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System

Key Features :
 
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.

2200 Watts peak output power, 1100 Watts continuous.

HiQnet? compatible; network control.

15-inch Differential Drive? low-frequency driver for
extended low-frequency output.

60° x 40°coverage.

Stylized and ergonomically designed powder-coated
die cast aluminum handles.

Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).

Optional DPCN (CobraNet?) digital audio input
module available.
 
Specifications:

Frequency Range

:

34 Hz to 20 kHz (-10 dB)

Frequency Response

:

43 Hz to 18 kHz ( ± 3 dB)

Coverage Pattern

:

60°x 40° rotatable waveguide

Directivity Factor (Q)

:

15.85

Directivity Index (DI)

:

12 dB

Maximum Peak Output1

:

138 dB SPL 1m

Transducer Section

   

Low Frequency Section

:

JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled

Bandpass
Nominal Impedance

:

4 ohms

Mid/High
Frequency Section

:

 

Mid Frequency

:

JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer

High Frequency

:

JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit

Waveguide

:

JBL PT-K64-MHF

Bandpass
Nominal Impedance

:

8 ohms

System

 

DP2 Internal
Amplification Output
(at nominal load)

:

2200 Watts Peak,
1100 Watts Continuous

DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance)

:

750LF/350HF Watts

DP2 Output Section

:

2-Channel, Class I

Audio Input connector:

:

XLR with loop-through

Network
Control Connector

:

Ethernet, RJ45

Signal Processing

:

DSP Based, resident in
Input Module

System Management

:

DSP based limiters for mechanical
and thermal protection

AC Power
Operating Range

:

Auto Select 90-132VAC/
216-264VAC, 50/60Hz

AC Line Voltage

:

50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%)

AC Input Connector

:

Neutrik PowerCon

AC Loop-Thru

:

Neutrik PowerCon

AC Current Requirement

:

6A per system at 120V, 3A per
system at 240V

Enclosure

 

Box Construction

:

5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.

Suspension System

:

6 standard air-cargo 3 in. track
and 12 M10 fittings

Grille

:

14 Gauge Black powder-coated
perforated steel with foam backing

Dimensions
(H x W x D)

:

914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in)

Net Weight

:

44 kg (97 lb)

  • High-power 550-Watt 2-way PA sound reinforcement speaker system for live and playback applications
  • Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
  • Integrated sound processor for ultimate system control and speaker protection
  • Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
  • State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
  • Ultra-wide dispersion, large-format exponential horn
  • Ultra-low noise Mic/Line input with Volume control and Clip LED
  • Dedicated 2-band EQ for perfect sound adjustment
  • Additional Line output allows linking of additional speaker systems
  • Versatile trapezoidal enclosure design allows different positioning:
  • - Stand mounting with 35-mm pole socket
  • - Tilts on its side for use as a floor monitor
  • Ergonomically shaped handles for easy carrying and setup
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
Thanks to our revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers. Put simply, you get all the power without the back-breaking weight. And the sound quality of these lightweight loudspeakers exceeds that of our extremely popular EUROLIVE B212A and B215A systems — plus we've included two 200-Watt models, the B210D (10“) and B208D (8“) for less demanding applications.
Due to their high-efficiency design, they crank out 550/200 of the cleanest, punchiest audio Watts you've ever heard from a compact loudspeaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion — even at extreme operating levels. In addition, all four models feature an Ultra-Low Noise (ULN) Mic/Line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control.
Intelligent by Design One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off — that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand.
BEHRINGER's D Series' "Intelligent-Design" merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class-D amplifi er topology.
Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems! These components work together seamlessly to provide optimum sound quality — and it all takes place automatically, without you having to touch a single knob.
Class D Amplifier Technology Delivers High Power With Low Weight. Instead of operating relatively continuously like Class AB circuits, Class D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces the power losses in the output devices. This is easy in theory and complex in practice, which is why there are so many different Class D designs. Without boring you with terms like PWM Generation and Gate Drivers, let's just say that to realize the benefits of a Class D design requires compensating for a lot of potential problems that can cause audible distortion. BEHRINGER didn't invent Class D technology, but our R&D Department has been working for years to perfect our own version with all the benefits of reduced weight and cool running, and none of the drawbacks. That's why we invested over a solid year of research time eliminating pitfalls like quantizing errors and excess dead time, selecting just the right switching frequency (and other equally tech-y terms). And why we spent an equally long time testing individual components to ensure they will stand up to the rigors of the real world.
When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supply's capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesn't require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles.
Instant PA System With just a single D Series loudspeaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers. Stereo Music System You can even use two D Series enclosures for stereo playback of your MP3, CD or old-skool cassette deck without any additional hardware. Just plug the appropriate stereo "breakout" adapter into your deck's output jack and run the cables to the 1/4" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voilà, instant party!
Marvelous Monitoring Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel.
Custom-Designed Transducers Let's face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don't cut any corners. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components, like the long-excursion LF transducers and state-of-the-art 1.35" compression drivers we deploy in each and every EUROLIVE enclosure. Low Frequency Response The EUROLIVE D Series was built with extended low frequency handling in mind. With a tuned port, internally braced, injection molded enclosure, each model's custom-designed LF transducer (woofer) really cranks out tight low end. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate. Accurate Non-Fatiguing Midrange and Treble Even if your particular application doesn't include booming bass, you'll love the sheer accuracy of these loudspeakers. Over a year of design went into a exponential horn/aluminum dome compression driver combination that could do justice to loud hard rock or dance music — yet could also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing or acoustical instruments, they are un-matched for being able to articulate complex harmonic details. In fact, many customers think it's the most natural-sounding speaker they've ever heard at anywhere near the price.
Processor Controlled Output Dynamic processing is one of the best ways to maximize output without sacrificing sound quality. The D Series' built-in circuitry automatically adjusts program content, allowing the loudspeaker to operate at extreme levels. It accomplishes this by reducing bass output slightly as you approach the limit of the transducers. This frees up LF amp and transducer resources, so that higher overall volume can be realized. It's like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters. By making subtle changes to the crossover frequency and the audio content, the system is able to crank out more sound — without the slightest hint of distortion.
Massive Power to Size Ratio Cutting-edge technology and high-fidelity speakers are not all it takes to get your message across — you need power, and lots of it. At the heart of each EUROLIVE D Series loudspeaker are two high-current amplifiers with a total output of 550-Watts for the B212D/B215D and 200-Watts for the B210D/B208D. They're capable of driving the speakers to their maximum with no distortion — and without speaker damage, thanks to active internal protection circuits. Put simply, they will astound you with their massive punch, smooth mids and articulate top-end! Which Speaker do I Need? As you've probably noticed, we make these active loudspeakers in four different woofer sizes. Which one is right for you?
Well, let's start with your application. Is it spoken word in a hotel ballroom? Hard rock in a park? A folk singer or a drum 'n' bass DJ? Loud enough for an 18-year old or loud enough for your grandmother? A huge auditorium or a tiny club? Physics are physics and a 15" low frequency transducer has almost 40% more surface area with which to move air than a 12“. A 12" has 30% more area than a 10“, and a 10" has 35% more than an 8“. So the easiest answer is "Whether to choose one speaker cabinet over another depends on your bass requirements." If you're addressing a small meeting, or demoing the latest "slice-o-chop-o-vegamatic" at the swap meet or county fair, the B208D might be all the speaker you'll need. But if you're providing disco to the masses at a standing room only nightclub — or you just need to crank it up louder, then the B215D may be a better choice.
As you can see, "Bass requirements" isn't quite as easy an answer as it sounds. The larger a room's cubic volume, the more energy is required to achieve a given level of bass. In other words, when playing the same tune in a big room versus a small room, big room = less bass; small room = more bass. Confused yet? We suggest that you consult your BEHRINGER dealer for more advice on this subject, which is also a good time to do a listening test —against their competition and against each other. Judge for yourself. And then own BEHRINGER with money to spare.

The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.

The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.


 

Weight24 kg29.50 kg44.00 kg21.00 kg28.00 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 24 kg
Weight 29.50 kg
Weight 44.00 kg
Weight 21.00 kg
Weight 28.00 kg
Weight 15.00 kg