Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15″ RCF ART 915-A is a highly flexible, easy to use, 2100W powered PA speaker for today’s working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 915-A’s is well equipped to cover an audience of up to 300.
A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 915-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
A single combo XLR-1/4″ connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output, for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15″ woofer and 700W to the 1.75″ compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 915-A includes a power cord.
At a Glance
Up to 131 dB sound pressure level
2100W Class-D Bi-Amplification
45 Hz to 20 kHz linear frequency response
1.75″ compression driver
15″ woofer
FiRPHASE zero degrees phase technology
Bass Motion Control (BMC) woofer excursion management
Preset Selector
LINEAR: This preset is recommended for all regular applications of the speaker
BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
STAGE: This preset is recommended when the speaker is used as a stage monitor
Power that Moves
With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
ART 9 is very energy efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new, low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high efficiency with minimum weight
M-Brace Cabinet Design
The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
The grille cover is heavy-duty steel, protecting both transducers and vented ports
The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping, even at maximum volume settings
It also performs as a reinforcement structure, for greater resistance to mechanical stress
Bass Motion Control
When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
FiRPHASE
The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints
The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
True Resistive Waveguide
The True Resistive Waveguide is the result of several refinements in both the transducers’ and the vented ports’ design with Finite Element Analysis, and constant measurement in RCF anechoic chambers
Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image
Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
Remarkable Transducers
High Frequencies: The 1.75″ compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer
Low Frequencies: Low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. The woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels.
Configuration
Active 2-Way
Enclosure Type
Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity
2100 W
Amplifier Power Rating
LF: 1400 W Peak HF: 700 W Peak
Amplifier Class
Class-D
Drivers
HF Driver
1 x 1″ / 25.4 mm Titanium Compression Driver
HF Voice Coil
1.75″ / 44.45 mm
MF Driver
None
LF Driver
1 x 15″ / 381 mm Woofer
LF Voice Coil
2.5″ / 63.5 mm
Performance
Frequency Response
45 Hz to 20 kHz
Maximum SPL
131 dB (Peak)
Coverage Angle
100° H x 60° V
Protections
RMS, Signal Limiter, Thermal
Connectivity
Audio I/O
1 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Input 1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O
None
USB
None
Wireless Connectivity
None
Signal Processing
Crossover
High-Pass: 1800 Hz (Internal)
EQ
None
Parametric EQ
None
Semi-Parametric EQ
None
Dynamic Processing
Soft Limiter
Alignment Delay
None
Phase Adjustment
None
Digital Signal Processing
FIR Filter, Venue Settings
Power
AC Input Power
100 to 120 VAC, 60 Hz
AC Power I/O
1 x IEC Input
Power Consumption
300 W
Physical
Mounting
2 x M10 Fly Point (Top) 1 x M10 Fly Point (Each Side) 1 x 1.38″ / 35 mm Pole Socket (Bottom)
Handles
1 x Top 1 x Each Side
Cooling
Convection, Heat Sink
Construction Material
Composite, Stainless Steel Grille
Dimensions
28.2 x 16.3 x 16.1″ / 716.3 x 414 x 408.9 mm
Weight
48.5 lb / 22 kg
Weight
22 kg
Reviews
There are no reviews yet.
Be the first to review “RCF ART 915-A Two-Way 15″ 2100W Powered PA Speaker with Integrated DSP” Cancel reply
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15" RCF ART 915-A is a highly flexible, easy to use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 915-A's is well equipped to cover an audience of up to 300.A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 915-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.A single combo XLR-1/4" connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output, for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15" woofer and 700W to the 1.75" compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 915-A includes a power cord.
At a Glance
Up to 131 dB sound pressure level
2100W Class-D Bi-Amplification
45 Hz to 20 kHz linear frequency response
1.75" compression driver
15" woofer
FiRPHASE zero degrees phase technology
Bass Motion Control (BMC) woofer excursion management
Preset Selector
LINEAR: This preset is recommended for all regular applications of the speaker
BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
STAGE: This preset is recommended when the speaker is used as a stage monitor
Power that Moves
With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
ART 9 is very energy efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new, low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high efficiency with minimum weight
M-Brace Cabinet Design
The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
The grille cover is heavy-duty steel, protecting both transducers and vented ports
The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping, even at maximum volume settings
It also performs as a reinforcement structure, for greater resistance to mechanical stress
Bass Motion Control
When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
FiRPHASE
The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints
The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
True Resistive Waveguide
The True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers
Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image
Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
Remarkable Transducers
High Frequencies: The 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer
Low Frequencies: Low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. The woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels.
Configuration
Active 2-Way
Enclosure Type
Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity
2100 W
Amplifier Power Rating
LF:1400 W PeakHF:700 W Peak
Amplifier Class
Class-D
Drivers
HF Driver
1 x 1" / 25.4 mm Titanium Compression Driver
HF Voice Coil
1.75" / 44.45 mm
MF Driver
None
LF Driver
1 x 15" / 381 mm Woofer
LF Voice Coil
2.5" / 63.5 mm
Performance
Frequency Response
45 Hz to 20 kHz
Maximum SPL
131 dB (Peak)
Coverage Angle
100° H x 60° V
Protections
RMS, Signal Limiter, Thermal
Connectivity
Audio I/O
1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O
None
USB
None
Wireless Connectivity
None
Signal Processing
Crossover
High-Pass:1800 Hz (Internal)
EQ
None
Parametric EQ
None
Semi-Parametric EQ
None
Dynamic Processing
Soft Limiter
Alignment Delay
None
Phase Adjustment
None
Digital Signal Processing
FIR Filter, Venue Settings
Power
AC Input Power
100 to 120 VAC, 60 Hz
AC Power I/O
1 x IEC Input
Power Consumption
300 W
Physical
Mounting
2 x M10 Fly Point (Top)1 x M10 Fly Point (Each Side)1 x 1.38" / 35 mm Pole Socket (Bottom)
Handles
1 x Top1 x Each Side
Cooling
Convection, Heat Sink
Construction Material
Composite, Stainless Steel Grille
Dimensions
28.2 x 16.3 x 16.1" / 716.3 x 414 x 408.9 mm
Weight
48.5 lb / 22 kg
High-power 550-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Integrated sound processor for ultimate system control and speaker protection
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-low noise Mic/Line input with Volume control and Clip LED
Dedicated 2-band EQ for perfect sound adjustment
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Thanks to our revolutionary Class-D amplifier technology and internal switch-mode power supplies, EUROLIVE D Series loudspeakers provide a much better power-to-weight ratio than competing active speakers. Put simply, you get all the power without the back-breaking weight. And the sound quality of these lightweight loudspeakers exceeds that of our extremely popular EUROLIVE B212A and B215A systems — plus we've included two 200-Watt models, the B210D (10“) and B208D (8“) for less demanding applications. Due to their high-efficiency design, they crank out 550/200 of the cleanest, punchiest audio Watts you've ever heard from a compact loudspeaker system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion — even at extreme operating levels. In addition, all four models feature an Ultra-Low Noise (ULN) Mic/Line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control. Intelligent by Design One of the coolest things about active loudspeakers is the lack of back-breaking racks of amps, crossovers and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off — that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand. BEHRINGER's D Series' "Intelligent-Design" merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class-D amplifi er topology. Hidden deep inside each enclosure is the equivalent of an active 2-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter and two Class-D power amplifiers, yet overall weight is less than comparable loudspeaker systems! These components work together seamlessly to provide optimum sound quality — and it all takes place automatically, without you having to touch a single knob. Class D Amplifier Technology Delivers High Power With Low Weight. Instead of operating relatively continuously like Class AB circuits, Class D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces the power losses in the output devices. This is easy in theory and complex in practice, which is why there are so many different Class D designs. Without boring you with terms like PWM Generation and Gate Drivers, let's just say that to realize the benefits of a Class D design requires compensating for a lot of potential problems that can cause audible distortion. BEHRINGER didn't invent Class D technology, but our R&D Department has been working for years to perfect our own version with all the benefits of reduced weight and cool running, and none of the drawbacks. That's why we invested over a solid year of research time eliminating pitfalls like quantizing errors and excess dead time, selecting just the right switching frequency (and other equally tech-y terms). And why we spent an equally long time testing individual components to ensure they will stand up to the rigors of the real world. When combined with switching-mode power supplies that replace heavy toroid transformers, our new designs provide more dynamic punch since the higher switching frequency reloads the supply's capacitors much faster. And, because they are so much more efficient, the D Series runs cooler and doesn't require huge, heavy heat sinks. The resulting speakers systems are much lighter, making them easy to transport and set up. Our no-compromise design means your D Series active loudspeakers will deliver full power and incredible fidelity all night long, with no need for rest cycles. Instant PA System With just a single D Series loudspeaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers. Stereo Music System You can even use two D Series enclosures for stereo playback of your MP3, CD or old-skool cassette deck without any additional hardware. Just plug the appropriate stereo "breakout" adapter into your deck's output jack and run the cables to the 1/4" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voilà, instant party! Marvelous Monitoring Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and, of course, power. Additional monitors can be chained together via the XLR LINK OUTPUT jack on the rear panel. Custom-Designed Transducers Let's face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don't cut any corners. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components, like the long-excursion LF transducers and state-of-the-art 1.35" compression drivers we deploy in each and every EUROLIVE enclosure. Low Frequency Response The EUROLIVE D Series was built with extended low frequency handling in mind. With a tuned port, internally braced, injection molded enclosure, each model's custom-designed LF transducer (woofer) really cranks out tight low end. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate. Accurate Non-Fatiguing Midrange and Treble Even if your particular application doesn't include booming bass, you'll love the sheer accuracy of these loudspeakers. Over a year of design went into a exponential horn/aluminum dome compression driver combination that could do justice to loud hard rock or dance music — yet could also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing or acoustical instruments, they are un-matched for being able to articulate complex harmonic details. In fact, many customers think it's the most natural-sounding speaker they've ever heard at anywhere near the price. Processor Controlled Output Dynamic processing is one of the best ways to maximize output without sacrificing sound quality. The D Series' built-in circuitry automatically adjusts program content, allowing the loudspeaker to operate at extreme levels. It accomplishes this by reducing bass output slightly as you approach the limit of the transducers. This frees up LF amp and transducer resources, so that higher overall volume can be realized. It's like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters. By making subtle changes to the crossover frequency and the audio content, the system is able to crank out more sound — without the slightest hint of distortion. Massive Power to Size Ratio Cutting-edge technology and high-fidelity speakers are not all it takes to get your message across — you need power, and lots of it. At the heart of each EUROLIVE D Series loudspeaker are two high-current amplifiers with a total output of 550-Watts for the B212D/B215D and 200-Watts for the B210D/B208D. They're capable of driving the speakers to their maximum with no distortion — and without speaker damage, thanks to active internal protection circuits. Put simply, they will astound you with their massive punch, smooth mids and articulate top-end! Which Speaker do I Need? As you've probably noticed, we make these active loudspeakers in four different woofer sizes. Which one is right for you? Well, let's start with your application. Is it spoken word in a hotel ballroom? Hard rock in a park? A folk singer or a drum 'n' bass DJ? Loud enough for an 18-year old or loud enough for your grandmother? A huge auditorium or a tiny club? Physics are physics and a 15" low frequency transducer has almost 40% more surface area with which to move air than a 12“. A 12" has 30% more area than a 10“, and a 10" has 35% more than an 8“. So the easiest answer is "Whether to choose one speaker cabinet over another depends on your bass requirements." If you're addressing a small meeting, or demoing the latest "slice-o-chop-o-vegamatic" at the swap meet or county fair, the B208D might be all the speaker you'll need. But if you're providing disco to the masses at a standing room only nightclub — or you just need to crank it up louder, then the B215D may be a better choice. As you can see, "Bass requirements" isn't quite as easy an answer as it sounds. The larger a room's cubic volume, the more energy is required to achieve a given level of bass. In other words, when playing the same tune in a big room versus a small room, big room = less bass; small room = more bass. Confused yet? We suggest that you consult your BEHRINGER dealer for more advice on this subject, which is also a good time to do a listening test —against their competition and against each other. Judge for yourself. And then own BEHRINGER with money to spare. Maximum Amplifier Output Capability, IHF-A 500 W Amplifier Power RMS 420 W Max. SPL 1m / calc. 124 dB Frequency Range (-10 dB) 50 Hz to 17 kHz Nominal Coverage Angle 90° x 50° (Horizontal x Vertical) Audio Input (LINE 1 or MIC/LINE 2) XLR and 1/4" TRS combination Audio Input (AUX) Stereo RCA, unbalanced Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 1.7 kHz Product Dimensions (W x H x D) 708 x 432 x 382 mm Net Weight 22.5 kg Optional Accessories --- SH-115A, Dust Cover F01U270396 VPM 1500, variable speaker pole F01U141047 BS 35, speaker stand F01U141046
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 133dB
Horizontal Coverage Angle 60 Degrees Axisymmetric
Vertical Coverage Angle 60 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 32.1“
Width 17.5“
Depth 15.2“
Weight 64 lbs.
Manufacturer Part Number KW152
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
Composite cabinet makes this powerful speaker strong and lightweight
Flexible input options for virtually any application
Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
Active PA speaker with 15" LF driver and 1,100W Class-D power amp
Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
Bass and Treble EQ controls let you fine-tune your sound
Dual-angle pole mount socket makes it easy to position for optimum sound coverage
Injection-molded polypropylene enclosure is strong and lightweight
Recessed carry handle makes transport and setup easier
Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.