RCF ART 935-A Two-Way 15″ 2100W Powered PA Speaker with Integrated DSP

1,080.00 incl. GR VAT

Available on backorder

EAN: 8024530019136
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Advanced DSP with 3 Presets
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • 100 x 60° Coverage Angle
  • Combination XLR-1/4″ Inputs + XLR Output
  • 45 Hz to 20 kHz Frequency Response
  • 133 dB Max SPL Output
  • True Resistive Waveguide Technology
  • 15″ Woofer + 3″ Compression Driver
  • Configurations for Floor, Stage, Flown
  • Advanced DSP with 3 Presets
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • 100 x 60° Coverage Angle
  • Combination XLR-1/4″ Inputs + XLR Output
  • 45 Hz to 20 kHz Frequency Response
  • 133 dB Max SPL Output
  • True Resistive Waveguide Technology
  • 15″ Woofer + 3″ Compression Driver
  • Configurations for Floor, Stage, Flown

 

Read more

Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15″ RCF ART 935-A is a highly flexible, easy to use, 2100W powered PA speaker for today’s working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 935-A’s is well equipped to cover an audience of up to 300.

A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 935-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.

A single combo XLR-1/4″ connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15″ woofer and 700W to the 3″ titanium/neodymium compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 935-A includes a power cord.

At a Glance
  • Up to 133 dB sound pressure level
  • 2100W Class-D bi-amplification
  • 45 Hz to 20 kHz linear frequency response
  • 3″ Titanium/Neodymium compression driver
  • 15″ woofer
  • FiRPHASE zero degrees phase technology
  • Bass Motion Control woofer excursion management
Preset Selector
  • LINEAR: This preset is recommended for all regular applications of the speaker
  • BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
  • STAGE: This preset is recommended when the speaker is used as a stage monitor
Power that Moves
  • With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
  • ART 9 is very energy-efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
  • All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight
M-Brace Cabinet Design
  • The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
  • The grille cover is heavy-duty steel protecting both transducers and vented ports
  • The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings
  • It also performs as a reinforcement structure, for greater resistance to mechanical stress
Bass Motion Control
  • When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
  • ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
  • The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
  • When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
FiRPHASE
  • The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
  • FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints.
  • The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
  • This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
True Resistive Waveguide
  • The True Resistive Waveguide is the result of several refinements in both the transducers’ and the vented ports’ design with Finite Element Analysis, and constant measurement in RCF anechoic chambers
  • Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image.
  • Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
Remarkable Transducers
  • Compression Driver: The ND840 Compression Driver in pure Titanium with a 3″ voice coil allows a crossover point at only 700 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
  • Woofer: The low-frequency transducer is a high-power 15″ woofer with a 3″ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity 2100 W
Amplifier Power Rating LF:
1400 W Peak
HF:
700 W Peak
Amplifier Class Class-D
Drivers
HF Driver 1 x 1.4″ / 35.6 mm Titanium Compression Driver
HF Voice Coil 3″ / 76.2 mm
MF Driver None
LF Driver 1 x 15″ / 381 mm Woofer
LF Voice Coil 3″ / 76.2 mm
Magnet Neodymium
Performance
Frequency Response 45 Hz to 20 kHz
Maximum SPL 133 dB (Peak)
Coverage Angle 100° H x 60° V
Protections RMS, Signal Limiter, Thermal
Connectivity
Audio I/O 1 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Input
1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O None
USB None
Wireless Connectivity None
Signal Processing
Crossover 700 Hz (Internal)
EQ None
Parametric EQ None
Semi-Parametric EQ None
Dynamic Processing Soft Limiter
Alignment Delay None
Phase Adjustment None
Digital Signal Processing FIR Filter, Venue Settings
Power
AC Input Power 100 to 120 VAC, 60 Hz
AC Power I/O 1 x IEC Input
Power Consumption 300 W
Physical
Mounting 2 x M10 Fly Point (Top)
1 x M10 Fly Point (Each Side)
1 x 1.38″ / 35 mm Pole Socket (Bottom)
Handles 1 x Top
1 x Each Side
Cooling Convection, Heat Sink
Construction Material Composite, Stainless Steel Grille
Dimensions 28.2 x 16.3 x 16.1″ / 716.3 x 414 x 408.9 mm
Weight 53.4 lb / 24.2 kg
Weight 24.2 kg

Reviews

There are no reviews yet.

Be the first to review “RCF ART 935-A Two-Way 15″ 2100W Powered PA Speaker with Integrated DSP”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF ART 935-A Two-Way 15" 2100W Powered PA Speaker with Integrated DSP removeELECTRO VOICE zxA5-90B 2 WAY LOUDSPEAKER 1000W removeDYNACORD A118A 2WAY 18'' ACTIVE LOUDSPEAKER 4700W removeWHARFEDALE TITAN 15 ACTIVE TWO-WAY SPEAKER removeYAMAHA DBR-15 Αctive Loudspeaker 1000W RMS removeTurbosound Milan M15 2-WAY ACTIVE LOUDSPEAKER 450W cont. @ 8Ω remove
NameRCF ART 935-A Two-Way 15" 2100W Powered PA Speaker with Integrated DSP removeELECTRO VOICE zxA5-90B 2 WAY LOUDSPEAKER 1000W removeDYNACORD A118A 2WAY 18'' ACTIVE LOUDSPEAKER 4700W removeWHARFEDALE TITAN 15 ACTIVE TWO-WAY SPEAKER removeYAMAHA DBR-15 Αctive Loudspeaker 1000W RMS removeTurbosound Milan M15 2-WAY ACTIVE LOUDSPEAKER 450W cont. @ 8Ω remove
Imagercf art 935-A active woofer 12
SKU13000682001989E009290TITAN15ACTIVEH000.00140E005677
Rating
Price 1,080.00 incl. GR VAT 1,940.00 incl. GR VAT 1,083.00 incl. GR VAT 736.75 incl. GR VAT 689.00 incl. GR VAT 606.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Advanced DSP with 3 Presets
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • 100 x 60° Coverage Angle
  • Combination XLR-1/4" Inputs + XLR Output
  • 45 Hz to 20 kHz Frequency Response
  • 133 dB Max SPL Output
  • True Resistive Waveguide Technology
  • 15" Woofer + 3" Compression Driver
  • Configurations for Floor, Stage, Flown
Content
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15" RCF ART 935-A is a highly flexible, easy to use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 935-A's is well equipped to cover an audience of up to 300. A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 935-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. A single combo XLR-1/4" connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15" woofer and 700W to the 3" titanium/neodymium compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 935-A includes a power cord.
At a Glance
  • Up to 133 dB sound pressure level
  • 2100W Class-D bi-amplification
  • 45 Hz to 20 kHz linear frequency response
  • 3" Titanium/Neodymium compression driver
  • 15" woofer
  • FiRPHASE zero degrees phase technology
  • Bass Motion Control woofer excursion management
Preset Selector
  • LINEAR: This preset is recommended for all regular applications of the speaker
  • BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
  • STAGE: This preset is recommended when the speaker is used as a stage monitor
Power that Moves
  • With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
  • ART 9 is very energy-efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
  • All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight
M-Brace Cabinet Design
  • The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
  • The grille cover is heavy-duty steel protecting both transducers and vented ports
  • The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings
  • It also performs as a reinforcement structure, for greater resistance to mechanical stress
Bass Motion Control
  • When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
  • ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
  • The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
  • When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
FiRPHASE
  • The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
  • FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints.
  • The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
  • This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
True Resistive Waveguide
  • The True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers
  • Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image.
  • Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
Remarkable Transducers
  • Compression Driver: The ND840 Compression Driver in pure Titanium with a 3" voice coil allows a crossover point at only 700 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
  • Woofer: The low-frequency transducer is a high-power 15" woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity 2100 W
Amplifier Power Rating LF: 1400 W Peak HF: 700 W Peak
Amplifier Class Class-D
Drivers
HF Driver 1 x 1.4" / 35.6 mm Titanium Compression Driver
HF Voice Coil 3" / 76.2 mm
MF Driver None
LF Driver 1 x 15" / 381 mm Woofer
LF Voice Coil 3" / 76.2 mm
Magnet Neodymium
Performance
Frequency Response 45 Hz to 20 kHz
Maximum SPL 133 dB (Peak)
Coverage Angle 100° H x 60° V
Protections RMS, Signal Limiter, Thermal
Connectivity
Audio I/O 1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input 1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O None
USB None
Wireless Connectivity None
Signal Processing
Crossover 700 Hz (Internal)
EQ None
Parametric EQ None
Semi-Parametric EQ None
Dynamic Processing Soft Limiter
Alignment Delay None
Phase Adjustment None
Digital Signal Processing FIR Filter, Venue Settings
Power
AC Input Power 100 to 120 VAC, 60 Hz
AC Power I/O 1 x IEC Input
Power Consumption 300 W
Physical
Mounting 2 x M10 Fly Point (Top) 1 x M10 Fly Point (Each Side) 1 x 1.38" / 35 mm Pole Socket (Bottom)
Handles 1 x Top 1 x Each Side
Cooling Convection, Heat Sink
Construction Material Composite, Stainless Steel Grille
Dimensions 28.2 x 16.3 x 16.1" / 716.3 x 414 x 408.9 mm
Weight 53.4 lb / 24.2 kg

Specifications

  • LF Amplifier Power (RMS): 1000 watts
  • HF Amplifier Power (RMS): 250 watts
  • Frequency Response (-3dB): 58-18000 Hz
  • Frequency Response (-10dB): 50-20000 Hz
  • Max. SPL/1m (calc); half space: 133 dB
  • Coverage (nominal -6dB) Horizontal: 90°
  • Coverage (nominal -6dB) Vertical: 50°
  • LF Transducer: DVX3150
  • HF Transducer: ND2
  • Crossover Frequency: 1500 Hz
  • Enclosure Material: Polypropylene
  • Flying: Yes
  • Input Connections: XLR
  • Chassis Size: 15“
  • Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
  • Weight (net): 50.49 lbs
  • Dimensions (H x W x D): 27.24" x 17.56" x 16.18“

Features:

    EVS-18K 18-inch Woofer
    123 dB max. SPL
    400 W Class-D Amplifier
    Integrated DSP

 
Cabinet
Powered subwoofer 1 x 18“, vented design
Maximum Amplifier Output Capability, IHF-A
400 W
Amplifier Power RMS
305 W
Max. SPL 1m / calc.
123 dB
Frequency Range (-10 dB)
40 Hz to 130 Hz
Nominal Coverage Angle
Omnidirectional
Audio Input
XLR and 1/4" TRS combination
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
100 Hz
Product Dimensions (W x H x D)
661 x 507 x 574 mm
Net Weight
31.3 kg
Optional Accessories
---
SH-118A, Dust Cover
F01U270397


User's Manual

The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.

The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.

The speaker stand receptacle features a locking screw to ensure stability.

Ten M8 threaded rigging points are provided for a variety of safe flying

configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.

Mixer and Controls

The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.

SPECIFICATIONS
MODEL TITAN 15 ACTIVE
GENERAL INFO
System type Active 15" 2-way Bi-Amplified
Frequency response +/- 3db 50-20kHz
HF SECTION
Hf type Titanium Compression Driver
Horn dispersion (H x V) 90° x 60°
Hf exit size mm / inches 25mm / 1“
PHYSICAL FEATURES
Enclosure Material Injection Moulded Polypropylene
Enclosure Colour Grey or White or Black
Size (mm/inches) 381mm / 15“
IN / OUT PANEL (speaker Level)
Input connector XLR - 1/ 4" Combo jack
AMPLIFIER POWER
Power On Protection Power switch on / off mute
Thermal Protection Amplifier shutdown, auto reset
Low Line Voltage Shut Down 60% Nominal line voltage
Driver Protection Independent LF and HF limiters
DC Protection Yes
Short Protection Yes
Controls High (±10dB) 10kHz Shelving
Dimensions (HxWxD)
mm 708.3mm x 477.8mm x 401.77mm
inches 27.9" x 18.8" x 15.8“
Microphone / Transmitter
Maximum Input Level +22dBu
Impedance 4 Ω
MIXER MODEL
INPUT IMPEDANCE Balanced: 20k ohms Unbalanced: 10k ohms
Clip Limiter Turns on approx 350W output
Limiter Indicator Red LED
Power Indicator Red LED
AC Power details
Power Supply High Efficiency Switching Mode Power Supply
AC Power Options AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator LED
Rigging / Bracket / 10 M8 threaded inserts including 4
Mounting Options M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket
Impedance Balanced Balanced: 1k ohm - Unbalanced: 500 ohm
Line Output
Line Output Connector Switchable LOOP / MIX Balanced Male XLR
Input A - type Switchable balanced mic or line level input
Input Sensitivity Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level +22dBu
Input Connector XLR - 1/ 4" Combo jack
Input Impedance Balanced: 20k ohms Unbalanced: 10k ohms
Input B - type Line level input
Input Sensitivity XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
Maximum Input Level +22dBu
Input Connectors Combo jack: 1/4" - XLR / Summed dual RCA jacks
Bass Response Optimizer
(“BRO“™) circuit +5dB at 60Hz
Subsonic Filter 30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D) Rated 350W RMS, 700W Peak
High- Frequency (Class A/B) Rated 70W RMS, 140W Peak
Electronic Crossover 24dB/octave Linkwitz-Riley
Crossover Frequency 1.8kHz
Controls High (±10dB) 10kHz Shelving
Equalization Low (±10dB) 100Hz Shelving
DIMENSIONS & WEIGHT
Net weight ( kg / lbs ) 23.7kg / 52.67lbs
Gross weight ( kg / lbs ) 26.94kg / 59.27lbs

The DBR15 achieves best-in-class SPL of up to132dB and delivers the lowest frequency in its lineup. The DBR15 delivers outstanding performance for the main front-of-house sound for the live performance or DJ events that require highly prominent low and more power.

Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.

Turbosound Milan M15 Powered PA Speaker at a Glance:

  • Composite cabinet makes this powerful speaker strong and lightweight
  • Flexible input options for virtually any application
  • Designed to serve double-duty as a floor monitor too

Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.

Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.

Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.

Turbosound Milan M15 Powered PA Speaker Features:
  • Active PA speaker with 15" LF driver and 1,100W Class-D power amp
  • Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
  • Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
  • Bass and Treble EQ controls let you fine-tune your sound
  • Dual-angle pole mount socket makes it easy to position for optimum sound coverage
  • Injection-molded polypropylene enclosure is strong and lightweight
  • Recessed carry handle makes transport and setup easier
  • Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping

Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 1,000W (peak) Class-D
HF Driver Size 1“
HF Driver Power Amp 100W (peak) Class-D
Frequency Range 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB)
Maximum Peak SPL 130 dB
Horizontal Coverage Angle 90 degrees
Vertical Coverage Angle 60 degrees
Enclosure Material Polypropylene
Mounting Options Pole, Floor Wedge, Fly
Inputs 2 x XLR/TRS combo
Outputs 1 x XLR
Height 28.3“
Width 18“
Depth 14.5“
Weight 60.9 lbs.
Manufacturer Part Number M15UL
Weight24.2 kg22.60 kg31.30 kg26.94 kg20.00 kg22.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 24.2 kg
Weight 22.60 kg
Weight 31.30 kg
Weight 26.94 kg
Weight 20.00 kg
Weight 22.00 kg