RCF ART 935-A Two-Way 15″ 2100W Powered PA Speaker with Integrated DSP

1,080.00 incl. GR VAT

Available on backorder

EAN: 8024530019136
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Advanced DSP with 3 Presets
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • 100 x 60° Coverage Angle
  • Combination XLR-1/4″ Inputs + XLR Output
  • 45 Hz to 20 kHz Frequency Response
  • 133 dB Max SPL Output
  • True Resistive Waveguide Technology
  • 15″ Woofer + 3″ Compression Driver
  • Configurations for Floor, Stage, Flown
  • Advanced DSP with 3 Presets
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • 100 x 60° Coverage Angle
  • Combination XLR-1/4″ Inputs + XLR Output
  • 45 Hz to 20 kHz Frequency Response
  • 133 dB Max SPL Output
  • True Resistive Waveguide Technology
  • 15″ Woofer + 3″ Compression Driver
  • Configurations for Floor, Stage, Flown

 

Read more

Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15″ RCF ART 935-A is a highly flexible, easy to use, 2100W powered PA speaker for today’s working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 935-A’s is well equipped to cover an audience of up to 300.

A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 935-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.

A single combo XLR-1/4″ connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15″ woofer and 700W to the 3″ titanium/neodymium compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 935-A includes a power cord.

At a Glance
  • Up to 133 dB sound pressure level
  • 2100W Class-D bi-amplification
  • 45 Hz to 20 kHz linear frequency response
  • 3″ Titanium/Neodymium compression driver
  • 15″ woofer
  • FiRPHASE zero degrees phase technology
  • Bass Motion Control woofer excursion management
Preset Selector
  • LINEAR: This preset is recommended for all regular applications of the speaker
  • BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
  • STAGE: This preset is recommended when the speaker is used as a stage monitor
Power that Moves
  • With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
  • ART 9 is very energy-efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
  • All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight
M-Brace Cabinet Design
  • The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
  • The grille cover is heavy-duty steel protecting both transducers and vented ports
  • The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings
  • It also performs as a reinforcement structure, for greater resistance to mechanical stress
Bass Motion Control
  • When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
  • ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
  • The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
  • When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
FiRPHASE
  • The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
  • FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints.
  • The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
  • This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
True Resistive Waveguide
  • The True Resistive Waveguide is the result of several refinements in both the transducers’ and the vented ports’ design with Finite Element Analysis, and constant measurement in RCF anechoic chambers
  • Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image.
  • Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
Remarkable Transducers
  • Compression Driver: The ND840 Compression Driver in pure Titanium with a 3″ voice coil allows a crossover point at only 700 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
  • Woofer: The low-frequency transducer is a high-power 15″ woofer with a 3″ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity 2100 W
Amplifier Power Rating LF:
1400 W Peak
HF:
700 W Peak
Amplifier Class Class-D
Drivers
HF Driver 1 x 1.4″ / 35.6 mm Titanium Compression Driver
HF Voice Coil 3″ / 76.2 mm
MF Driver None
LF Driver 1 x 15″ / 381 mm Woofer
LF Voice Coil 3″ / 76.2 mm
Magnet Neodymium
Performance
Frequency Response 45 Hz to 20 kHz
Maximum SPL 133 dB (Peak)
Coverage Angle 100° H x 60° V
Protections RMS, Signal Limiter, Thermal
Connectivity
Audio I/O 1 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Input
1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O None
USB None
Wireless Connectivity None
Signal Processing
Crossover 700 Hz (Internal)
EQ None
Parametric EQ None
Semi-Parametric EQ None
Dynamic Processing Soft Limiter
Alignment Delay None
Phase Adjustment None
Digital Signal Processing FIR Filter, Venue Settings
Power
AC Input Power 100 to 120 VAC, 60 Hz
AC Power I/O 1 x IEC Input
Power Consumption 300 W
Physical
Mounting 2 x M10 Fly Point (Top)
1 x M10 Fly Point (Each Side)
1 x 1.38″ / 35 mm Pole Socket (Bottom)
Handles 1 x Top
1 x Each Side
Cooling Convection, Heat Sink
Construction Material Composite, Stainless Steel Grille
Dimensions 28.2 x 16.3 x 16.1″ / 716.3 x 414 x 408.9 mm
Weight 53.4 lb / 24.2 kg
Weight 24.2 kg

Reviews

There are no reviews yet.

Be the first to review “RCF ART 935-A Two-Way 15″ 2100W Powered PA Speaker with Integrated DSP”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF ART 935-A Two-Way 15" 2100W Powered PA Speaker with Integrated DSP removeMONTARBO SPOT2500 ACTIVE SPOT 2x 15'' 2500W removeRCF ART 425-A Active speaker system 15" + 2", 400W removeRCF ART 415-A Active speaker system 15" + 1", 400W removeELECTRO VOICE zxA5-90B 2 WAY LOUDSPEAKER 1000W removeELECTRO VOICE ELX115P POWERED LOUDSPEAKER 400W remove
NameRCF ART 935-A Two-Way 15" 2100W Powered PA Speaker with Integrated DSP removeMONTARBO SPOT2500 ACTIVE SPOT 2x 15'' 2500W removeRCF ART 425-A Active speaker system 15" + 2", 400W removeRCF ART 415-A Active speaker system 15" + 1", 400W removeELECTRO VOICE zxA5-90B 2 WAY LOUDSPEAKER 1000W removeELECTRO VOICE ELX115P POWERED LOUDSPEAKER 400W remove
Imagercf art 935-A active woofer 12
SKU13000682MONTARBO SPOT2500ART425AART415A001989E002993
Rating
Price 1,080.00 incl. GR VAT 3,920.88 incl. GR VAT 906.29 incl. GR VAT 764.15 incl. GR VAT 1,940.00 incl. GR VAT 885.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Advanced DSP with 3 Presets
  • FiRPHASE Filters for Coherent Sound
  • Bass Motion Control Low-Freq Management
  • 100 x 60° Coverage Angle
  • Combination XLR-1/4" Inputs + XLR Output
  • 45 Hz to 20 kHz Frequency Response
  • 133 dB Max SPL Output
  • True Resistive Waveguide Technology
  • 15" Woofer + 3" Compression Driver
  • Configurations for Floor, Stage, Flown
Content
Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15" RCF ART 935-A is a highly flexible, easy to use, 2100W powered PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of ART 935-A's is well equipped to cover an audience of up to 300. A push button on the back of the speaker allows you to physically switch between three preset modes: Linear, for standard applications; Boost, which provides loudness equalization for background music played at low volumes; and Stage, for using the speaker as a stage monitor. The ART 935-A employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. A single combo XLR-1/4" connector can accept both unbalanced and balanced signals. There is also an XLR Thru-Output for daisy-chaining to additional speakers or other audio equipment. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15" woofer and 700W to the 3" titanium/neodymium compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 935-A includes a power cord.
At a Glance
  • Up to 133 dB sound pressure level
  • 2100W Class-D bi-amplification
  • 45 Hz to 20 kHz linear frequency response
  • 3" Titanium/Neodymium compression driver
  • 15" woofer
  • FiRPHASE zero degrees phase technology
  • Bass Motion Control woofer excursion management
Preset Selector
  • LINEAR: This preset is recommended for all regular applications of the speaker
  • BOOST: This preset creates a loudness equalization recommended for background music applications when the system plays at a low level
  • STAGE: This preset is recommended when the speaker is used as a stage monitor
Power that Moves
  • With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
  • ART 9 is very energy-efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
  • All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight
M-Brace Cabinet Design
  • The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
  • The grille cover is heavy-duty steel protecting both transducers and vented ports
  • The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings
  • It also performs as a reinforcement structure, for greater resistance to mechanical stress
Bass Motion Control
  • When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
  • ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
  • The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
  • When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.
FiRPHASE
  • The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
  • FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints.
  • The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
  • This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.
True Resistive Waveguide
  • The True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers
  • Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image.
  • Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.
Remarkable Transducers
  • Compression Driver: The ND840 Compression Driver in pure Titanium with a 3" voice coil allows a crossover point at only 700 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.
  • Woofer: The low-frequency transducer is a high-power 15" woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity 2100 W
Amplifier Power Rating LF: 1400 W Peak HF: 700 W Peak
Amplifier Class Class-D
Drivers
HF Driver 1 x 1.4" / 35.6 mm Titanium Compression Driver
HF Voice Coil 3" / 76.2 mm
MF Driver None
LF Driver 1 x 15" / 381 mm Woofer
LF Voice Coil 3" / 76.2 mm
Magnet Neodymium
Performance
Frequency Response 45 Hz to 20 kHz
Maximum SPL 133 dB (Peak)
Coverage Angle 100° H x 60° V
Protections RMS, Signal Limiter, Thermal
Connectivity
Audio I/O 1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input 1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O None
USB None
Wireless Connectivity None
Signal Processing
Crossover 700 Hz (Internal)
EQ None
Parametric EQ None
Semi-Parametric EQ None
Dynamic Processing Soft Limiter
Alignment Delay None
Phase Adjustment None
Digital Signal Processing FIR Filter, Venue Settings
Power
AC Input Power 100 to 120 VAC, 60 Hz
AC Power I/O 1 x IEC Input
Power Consumption 300 W
Physical
Mounting 2 x M10 Fly Point (Top) 1 x M10 Fly Point (Each Side) 1 x 1.38" / 35 mm Pole Socket (Bottom)
Handles 1 x Top 1 x Each Side
Cooling Convection, Heat Sink
Construction Material Composite, Stainless Steel Grille
Dimensions 28.2 x 16.3 x 16.1" / 716.3 x 414 x 408.9 mm
Weight 53.4 lb / 24.2 kg

Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.


SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.


5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.


- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.


APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.

Features

    400 Watt digital bi-amplification
    129 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    15" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 129 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 15" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Cabinet Material: Composite PP
    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 708/27.8 mm/inch
    Width: 437/17.2 mm/inch
    Depth: 389/15.3 mm/inch
    Net Weight: 26/57.32 kg/lbs

Features 400 Watt digital bi-amplification 128 dB max spl Wide dispersion 90 x 60 constant directivity horn 15" High power woofer, 2.5" voice coil 1" Mylar dome, high frequency driver DSP processing, boost eq, soft limiter and protection Xlr/jack input, xlr signal output Acoustical Specifications Frequency Response -3 dB: 50 Hz ÷ 20 kHz Max SPL: 128 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression Driver: 1" 1.4" voice coil Woofer: 15" 2.5" voice coil Input/Output Section Input signal: bal/unbal Input connectors: xlr-Jack Output connectors: xlr Processor Section Crossover frequencies: 1800 Hz Limiter: Fast limiter, RMS limiter Controls: Flat, Boost Amplifier Specifications Total power: 400 W High frequencies: 100 W Low frequencies: 300 W Connections: VDE Cabinet Cabinet Material: Composite PP Hardware: 2 x M10 flying points Handles: 1 on top, 2 on sides Pole Mount/Cap: yes Grille: steel Colour: Anthracite grey Physical Specifications Height: 708/27.8 mm/inch Width: 437/17.2 mm/inch Depth: 389/15.3 mm/inch Net Weight: 18.2/40.12 kg/lbs

Specifications

  • LF Amplifier Power (RMS): 1000 watts
  • HF Amplifier Power (RMS): 250 watts
  • Frequency Response (-3dB): 58-18000 Hz
  • Frequency Response (-10dB): 50-20000 Hz
  • Max. SPL/1m (calc); half space: 133 dB
  • Coverage (nominal -6dB) Horizontal: 90°
  • Coverage (nominal -6dB) Vertical: 50°
  • LF Transducer: DVX3150
  • HF Transducer: ND2
  • Crossover Frequency: 1500 Hz
  • Enclosure Material: Polypropylene
  • Flying: Yes
  • Input Connections: XLR
  • Chassis Size: 15“
  • Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
  • Weight (net): 50.49 lbs
  • Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
Case Material    9-ply, 15mm Plywood, Internally Braced, with Texured Paint Frequency Response (-3 dB)    56 Hz - 18 k Hz Frequency Response (-10 dB)    44 Hz - 20 k Hz Max. SPL/1m (calc)    134 dB Coverage (Nominal -6 dB) H°    90 ° Coverage (Nominal -6 dB) V°    50 ° LF Transducer    (1) EVS-15K, 381mm (15”) Woofer HF Transducer    DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver Crossover Frequency    1.7 k Hz Connector Type    (2) XLR/TRS Combo Jacks, (1) Stereo RCA, (1) XLR Link Output Grill    18GA Steel with Black Powdercoat Height    708 mm (27.87“) Width    432 mm (17.01“) Depth    382 mm (15.04“) Weight Net    24.3 kg (53.57 lbs) Shipping Weight    29.5 kg (65.04 lbs)
Weight24.2 kg35.00 kg26.00 kg18.20 kg22.60 kg29.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 24.2 kg
Weight 35.00 kg
Weight 26.00 kg
Weight 18.20 kg
Weight 22.60 kg
Weight 29.50 kg