RCF ART310 MKIII PASSIVE 300 WATT TWO-WAY SPEAKER

ART 310 is a 10” passive speaker ideal for installation purposes.


Thanks to its high quality neodymium transducers and very compact sized cabinet, it is the perfect speaker in all the situations where the output of a PA system and the size of a monitor are important.
The 10” woofer features a 2.5” voice coil and delivers very high efficiency and controlled bass reproduction.
The ART 310  is very easy to install due to it being incredibly lightweight and the two M10 fly points.

• 300 Watt power handling
• 127 dB max spl
• 90 x 70, Wide dispersion constant directivity horn
• 10" woofer, high power 2" voice coil
• 1" HF driver, titanium dome, neodymium 1.5" voice coil

• Frequency Response -10 dB: 50 Hz ÷ 20 kHz
• Max SPL @ 1m: 127 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 70°
• Nominal Impedance: 8 Ω
• Power Handling: 300 W
• Peak Power Handling: 1200 W
• Protections: Elettronic
• Crossover frequencies: 1800 Hz

• Compression Driver: 1" neo, 1.5" v.c.
• Woofer: 10“, 2" v.c.

• Input connector: Speakon
• Output connector: Speakon

• Cabinet Material: Composite PP
• Hardware: 2xM10 flying p.
• Handles: 1 top
• Pole Mount/Cap: Yes
• Colour: Black

• Height: 537 / 21.14 mm/inch
• Width: 337 / 13.26 mm/inch
• Depth: 314 / 12.36 mm/inch
• Net Weight: 12 / 22.04 kg/lbs

Specifications

Technical data

Speaker Type    2-Way Passive Speaker
Acoustical data

Nominal Power Rating    300 W/RMS
Program Power Rating    600 W/RMS
Peak Power Rating    900 W/RMS
Impedance    8 Ohms
Sensitivity 1W@1m    96 dB
Frequency Response [-10dB]    70 - 20.000 Hz
Frequency Response [+/- 3dB]    90 - 19.000 Hz
Max SPL    127 dB
HF    1 "
Type HF  Compression Driver
Voice Coil HF    1.5 "
Driver Protection    PTC
Directivity    90X70 °
Horn    CD Horn Aluminium
Rotatable Horn    Yes
Crossover Frequency (passive)    1800 Hz
Slope MF-HF    18 dB/Octave
LF    10 "
Voice Coil LF    2 "
Input Section

Signal Input    1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output    1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics

Housing    Multiplex birch plywood
Housing Design    Multifunctional
Color    Black
Surface Texture    Textured acrylic lacquer
Handles    1x on back
Pole Mount    36mm
Angles Up    Monitore use 45 °
Front Grille    1.5 mm metall grille with acoustic foam in back
Rigging Points    12 x M8
Width    320 mm (12.8 in)
Height    508 mm (20.32 in)
Depth    320 mm (12.8 in)
Weight    14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components

User\'s manual
Technical drawing

• Passive 2-way bass-reflex installation speaker
• 200 W permanent load capacity
• 118 dB maximum sound-level pressure
• 10" custom woofer and 1" Celestion high-frequency driver
• Rotating CD horn with 80° x 60° dispersion
• For vertical or horizontal use
• speakON-compatible and terminal block input
• 4 x M8 mounting holes
• Shock-resistant front grille for optimum speaker protection
• Extensive range of smart accessories for installation
• Available in black or white

With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.

The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.

Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).

• 38 Hz to 17 kHz frequency range
  (-10 dB)
• 250W pink noise, 500 watts continuous program power capacity
• 120 x 110 degree coverage horn
• 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
• 4 Ohm Bypass
• Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
• Available in black or white (Control 30-WH)
• Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
• Net Weight: 18.9 kg (42 lb)

Passive Reinforcement speaker 300W / 8ohm – 127dB SPL

FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.

The PROMAXX feature-set is matched by the enclosure’s versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.

Common features:

• bass reflex design cabinet
• 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
• 90°H x 60°V constant directivity horn
• Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles

• Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
• Speakon NL-4 IN and LINK OUT connectors

Description

• Superior, crystal clear, sound quality from a compact full range speaker cabinet.
• The VIBE10 Mk2 can be easily upgraded to an active (powered) cabinet: just plug-in the optional AVM-1 amplifier module, a matter of minutes!
• Remarkable low frequency reproduction for a small sized cabinet
• Perfect for permanent installation in bars, clubs and all kinds of venues where small cabinet size and sound quality at high SPL are important!
• Perfect for portable use: DJ, hiring companies, …
• VIBE10 Mk2 and VIBE15-SUB Mk2 make a perfect couple for more demanding situations.
• Solid, high strength, MDF enclosure
• Scratch resistant polyurethane painting
• Strong Metal grill with acoustic foam on the inside: improved look and better protection the speaker components against dust and splashing water.
• Strong M8 Rigging Points
• Built-in 35mm Speaker stand adapter
• High Power 10inch (25cm) Woofer
• High Power 1,5inch Titanium Driver
• 2 Neutrik Speakon® connectors
• Specially designed Glass fiber horn
• Built-in heavy duty carrying handles
• Heavy duty rubber feet

• Power Capacity: 200Wrms (400Wpeak)
• Input impedance: 8Ω
• Input Sensitivity: 95dB 1W/1m
• Max. SPL: 120dB
• Frequency response: 65 - 20.000Hz
• Nominal dispersion: 100° x 70° (HxV)
• Dimensions: 330 x 510 x 302 mm
• Weight: 15kg