RCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS

1,004.39 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%. A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, […]

 

Read more

This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%.

A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.  The integral soft clip limiter protects against damage to the connected loudspeakers.  The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

 

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω: 2 x 800 Watt rms  
Power output stereo 4Ω: 2 x 650 Watt rms  
Power output stereo 8Ω: 2 x 350 Watt rms  
Power output bridged 4Ω: 1600 Watt rms  
Power output bridged 8Ω: 1300 Watt rms  
Frequency Response: 20 Hz ÷ 20 kHz  
Signal/noise rate: > 103 dB  
Crosstalk: > 70 dB  
Distortion (THD+N):  
Intermodulation:  
Damping factor: 200:1 (8 Ω)  
Slew rate: 50 V/μS  
INPUT SECTION
Input connector: 2 x XLR balanced, 6,3mm jack unbalanced  
Input sensitivity: 0 / 0.775 dBm/V RMS  
Input impedance: 20.000 kΩ  
Controls: Volume control for each channel  
OUTPUT SECTION
Output connector: 2 x Neutrik Speakon 4 ways  
SYSTEM PARAMETERS
Cooling: Two-speed fan  
Protections: Temperature, DC, RFI short circuit, Soft-Start, Thermal on transformer  
POWER REQUIREMENT
Operating voltage: 220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current: 7.5 A  
Power Consumption: 2700 W  
PHYSICAL SPECIFICATIONS
Height: 88 / 3.46 mm/inch  
Width: 483 / 19.01 mm/inch  
Depth: 455 / 17.91 mm/inch  
Net Weight: 19.5 / 42.98 Kg/Lbs  
SHIPPING INFORMATION
Package height: 150 / 5.9 mm/inch  
Package width: 555 / 21.85 mm/inch  
Package depth: 525 / 20.66 mm/inch  
Shipping Weight: 20 / 44.09 Kg/Lbs

 

Weight 20.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeYAMAHA PC-4801N Power Amplifier 2x500W removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removeQSC GX-7 POWER AMPLIFIER 2x1000W RMS @ 4Ω, 2x725W RMS @ 8Ω removeYAMAHA PC-3301N Power Amplifier 2x400W remove
NameRCF HC 1600: 1600 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeYAMAHA PC-4801N Power Amplifier 2x500W removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removeQSC GX-7 POWER AMPLIFIER 2x1000W RMS @ 4Ω, 2x725W RMS @ 8Ω removeYAMAHA PC-3301N Power Amplifier 2x400W remove
Image
SKUHC1600H060.00035E15LDDP1600010002H060.00036
Rating
Price 1,004.39 incl. GR VAT 1,895.00 incl. GR VAT 2,079.48 incl. GR VAT 750.00 incl. GR VAT 695.00 incl. GR VAT 1,655.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

This professional stereo power amplifier, working in class-H mode, provides 2x800W, at an efficiency of around 85%.

A passive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.  The integral soft clip limiter protects against damage to the connected loudspeakers.  The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

 

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 800 Watt rms 
Power output stereo 4Ω:2 x 650 Watt rms 
Power output stereo 8Ω:2 x 350 Watt rms 
Power output bridged 4Ω:1600 Watt rms 
Power output bridged 8Ω:1300 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 103 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start, Thermal on transformer 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:7.5 A 
Power Consumption:2700 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:19.5 / 42.98 Kg/Lbs 
SHIPPING INFORMATION
Package height:150 / 5.9 mm/inch 
Package width:555 / 21.85 mm/inch 
Package depth:525 / 20.66 mm/inch 
Shipping Weight:20 / 44.09 Kg/Lbs

 

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 500 Watt / 8Ω RMS, 2 x 800 Watt / 4Ω RMS, 1600 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

Number of Channels: 2

Output Power: (per channel)

8 ohms     450W
4 ohms  850W
2 ohms 1550W



Output Power: (bridged)

8 ohms 1700W
4 ohms 3100W


THD%: (@1dB below max output)

@ 1kHz

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio. Product type Power Amplifiers
Type PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms) 2 x 800 W
Rated ouput power (1kHz @ 4 Ohms) 2 x 650 W
Rated ouput power (1kHz @ 8 Ohms) 2 x 450 W
Rated ouput power (1kHz @ 4 Ohms, bridged) 1600 W
Rated ouput power (1kHz @ 8 Ohms, bridged) 1300 W
Output circuitry Class H
Frequency response 20 - 20000 Hz
THD < 0.1 %
Signal-to-noise ratio 106 dB
Damping factor > 400
Crosstalk >80 dB
Gain 39 dB
Input sensitivity 0.775 V
Protection circuits clip limiter , DC protection , short circuit , thermal overload
Controls 2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)
Indicators level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs 2
Speaker output connections Speakon compatible , Terminal posts
Cooling highly efficient, automatic
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Weight 15,9 kg
Features Volex mains socket

- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon(R) combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1“/257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX7 is only 15.5 lbs (7 kg)
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail(TM) automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
- 230V 16.5 lbs (7.5 kg)

Weight20.00 kg12.50 kg12.00 kg15.90 kg7.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 20.00 kg
Weight 12.50 kg
Weight 12.00 kg
Weight 15.90 kg
Weight 7.00 kg
Weight 13.00 kg