Content |
The components are a 3” woofer and a coaxial dome tweeter that ensure a wide angle of coverage.
The speaker faithfully reproduces announcements and provides a good music background where included.
Combined with a subwoofer, the MQ30P allows high quality music distribution with high output levels.
An important feature of the MQ30P is that it provides consistent reproduction of all the frequencies involved in voice transmission and therefore, alone or in combination with a subwoofer, makes it possible to attain a high level of vocal intelligibility.
The MQ30P has been designed to adhere closely to the wall or ceiling and thus it has a limited protrusion.
The built-in hinged support makes the speaker easy to install and orient in any direction.
Like the other Monitor Q products, MQ30P installation is simple and flexible.
First, the support is mounted on the wall and the connector is wired; then, when the premises is completely furnished, the installation, orientation, and connection of the mini-speaker are immediate.
Acoustical Specifications |
---|
Type Of Speaker: | 2 way coaxial speaker | | Frequency Response: | 150 Hz | ÷ 20 kHz | Max SPL @ 1m: | 102 dB | | Horizontal coverage angle: | 120° | | Power Handling: | 12 Watt RMS | | Peak Power Handling: | 24 Watt PEAK | | System Sensitivity: | 88 dB | | Impedance: | 16 Ω | | Crossover frequencies: | 5.4 Hz | |
TRANSDUCERS |
---|
Speaker: | 3“ | | Coaxial: | 0.75“ | |
INPUT SECTION |
---|
Input connector: | 2 euroblock | | Constant voltage: | 100 V, 70 V V | | Power Selection: | 12 - 6 W (100 V) | |
CABINET |
---|
Hardware: | Body in self-extinguishing plastic | | Colour: | White / Silver / Black | | Grille: | Steel | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 104 / 4.09 | | Width: | 100 / 3.93 | | Depth: | 170 / 6.69 | | Net Weight: | 1.18 / 2.60 | |
SHIPPING INFORMATION |
---|
Package height: | 165 / 6.49 | | Package width: | 145 / 5.7 | | Package depth: | 275 / 10.82 | | Shipping Weight: | 1.53 / 3.37 |
|
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
| The JBL Control 128W premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.
JBL Control 128W at a Glance:
- 30 Hz - 20 kHz frequency range.
- 120W continuous program (60W cont. pink, 240W cont. peak).
- 90 dB sensitivity (1W/1m).
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
F-1000BTWP: 100V weather proof line full range speaker
Weather Proof version of the F-1000BT
IPX4 Water rated
Specification | Model F-100BTWP | Enclosure Type | Bass-reflex type | Rated Input | 15W | Impedance | 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W) | Sensitivity | 87dB (1w,1m) | Frequency Responce | 85-20,000Hz | Crossover Frequency | 5kHz | Directivity Angle | Horizontal 90°, vertical 90° | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 130(W) × 202(H) × 131(D)mm | Weight | 2 kg (3.97 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws. |
|
The BS-678 is a double-cone type speaker with a wooden cabinet that has a stylish, compact and unobtrusive design and that delivers highly cost effective performance. A push-in type input connector allows easy cable connections and bridge wiring. The selectable input impedance can be easily adjusted by changing the tap position
of the unitʼs transformer. 6" (16cm) double cone speaker unit ensures high-quality sound, making the BS-678 ideal for BGM and announcement applications. It can be installed in either a horizontal or a vertical orientation. Its structure permits direct wall installation with screws, making the speaker unit resistant to falling even if outward force is applied to it.
• Stylish, compact and unobtrusive design
• Quick and easy installation
• High cost-effectiveness
• Horizontal / vertical installation
• Ideally suited for BGM and announcements
BS-678 | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W),13kΩ (0.8W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ(0.8W),13kΩ (0.4W) | Sensitivity | (1W, 1m): 94dB (500 – 5,000Hz, pink noise) | Frequency Response: | 150 – 20,000Hz (peak –20dB) | Speaker Component: | 6" (16cm) double cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2(equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Finish: Baffle: | HIPS resin, off-white (RAL 9010 or equivalent colour) | Cabinet: | Particle board with pvc sheet, off-white(RAL 9010 or equivalent colour) | Grille: | Surface-treated steel plate net, off-white(RAL 9010 or equivalent colour) | Dimensions: | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“) | Weight: | 1.7kg (3.75 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) × 2 |
|
Reviews
There are no reviews yet.