Content |
2-WAY REFLEX SYSTEM
? 6.3 high efficiency dual-cone driver
? Built-in, multi-tap constant voltage transformer
? Black
APPLICATION: Indoor - outdoor
Technical Specifications:
2-Way Speaker System: LF 6,3? ? HF 1,5? Coaxial
Power : 50 W , 200W peak 10 / 25 / 50 W @ 100V
Sensitivity : 95 dB 1W @ 1m
Frequency Response : 200 Hz ? 15.000 Hz ± 3 dB
Impedance : 4 Ohms
Maximum SPL : 112,5 dB
Dimensions : 213 x 300 x 223 mm
Weight : 5 kg |
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white. |
F-1000BTWP: 100V weather proof line full range speaker
Weather Proof version of the F-1000BT
IPX4 Water rated
Specification | Model F-100BTWP | Enclosure Type | Bass-reflex type | Rated Input | 15W | Impedance | 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W) | Sensitivity | 87dB (1w,1m) | Frequency Responce | 85-20,000Hz | Crossover Frequency | 5kHz | Directivity Angle | Horizontal 90°, vertical 90° | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 130(W) × 202(H) × 131(D)mm | Weight | 2 kg (3.97 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws. |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
BS-33AT | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | Sensitivity: | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 810g (1.79 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
- 100 Hz to 21 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 5W tap at 70V, 10W tap at 100V
- Nominal maximum output: 89 dB at 70V, 92 dB at 100V
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
BS-1030B and BS-1030W Music/Paging Speakers
The TOA BS-1030 Music/Paging Speaker has exceptional sound quality and value for a wide variety of applications. Available in black and white, the versatile BS-1030 is designed for both indoor and outdoor use with a durable ABS resin enclosure and steel mesh grille. The two-way, bass-reflex design features a 4.72" (12 cm) cone woofer, 1" (2.5 cm) dome tweeter and built-in multi-tap transformer with screwdriver-adjustable power taps. A transformer bypass setting allows direct 8-ohm operation. Installation is fast and easy with the supplied mounting bracket or rear panel keyholes for horizontal or vertical surface-mounting. The BS-1030 speakers are backed with a five year warranty.
Also see the new FB-100 and HB-1 Subwoofers.
FEATURES:
Indoor and Outdoor Applications Mounting Bracket Included Paintable Enclosure Two-Way, Bass-Reflex Design 70.7/100 V and 8-Ohm Screwdriver-Adjustable Tap Settings Black (BS-1030B) and White (BS-1030W) |
Reviews
There are no reviews yet.