RCF MSW8 – 12

Discontinued
25%
All products by RCF

€638.90 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: Discontinued Discontinued SKU: MSW8 Category:
12″ SUBWOOFER FOR MONITOR SPEAKERS The MSW 8 is a professional subwoofer that has been expre ssly designed for use with the MONΙTOR 8 or 8W speaker ? The special dual load reflex configuration makes it possible to obtain a high level of efficiency, as well as a considerably extended low range frequency response and […]

 

Read more

12″ SUBWOOFER FOR MONITOR SPEAKERS

The MSW 8 is a professional subwoofer that has been expre ssly designed for use with the MONΙTOR 8 or 8W speaker
? The special dual load reflex configuration makes it possible to obtain a high level of efficiency, as well as a considerably extended low range frequency response and extremely reduced distortion.
? The ample exponential profile of the cone guarantees a linear excursion, and thus harmonic distortion at the low frequencies is reduced.
? The rear part of the 12 basket includes a finned heat sink which prevents the coil from overheating. In order to encourage air circulation
? Designed to reduce both overheating and vibration problems, the coil technology is based on a reinforced kapton support and heavy-duty adhesives (resistant up to 3000C).
? As the subwoofer range is non-directional, the unit can he situated in the most convenient place, even in a semi-hidden position.
? The MSW 8 has been designed for perfect combination with the Monitor 8, as setting this speaker unit on top of the subwoofer creates a system that is aesthetically consistent, also thanks to the uniform width. The MSW8 can also he used with the MR 5S or MR 5SW speaker.

TECHNICAL SPECIFICATIONS

SUB WOOFER

Power :

Sensitivity :

Frequency Response :

Impedance :

Maximum SPL :

Dimensions :

Weight :

 LF 12?

300W

94dB 1W @ 1m

38 Hz ? 150 Hz ± 3 dB

8 Ω

120 dB

290 x 800 x 508 mm

36 kg
Weight 36.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF MSW8 – 12”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF MSW8 - 12 removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω BLACK removeELECTRO VOICE EVID 12.1 PASSIVE 12 removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω WHITE removeTOA FB-120W LOUSPEAKER-NEW- removeDAS AUDIO Arco 12 Sub Passive 12'' 170W 8ohms remove
NameRCF MSW8 - 12 removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω BLACK removeELECTRO VOICE EVID 12.1 PASSIVE 12 removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω WHITE removeTOA FB-120W LOUSPEAKER-NEW- removeDAS AUDIO Arco 12 Sub Passive 12'' 170W 8ohms remove
Image
SKUMSW8E011449001744E011450FB-120WArco12Sub
Rating
Price €638.90 incl. GR VAT€571.37 incl. GR VAT €439.93 incl. GR VAT€571.37 incl. GR VAT €505.99 incl. GR VAT€589.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
12" SUBWOOFER FOR MONITOR SPEAKERS The MSW 8 is a professional subwoofer that has been expre ssly designed for use with the MONΙTOR 8 or 8W speaker ? The special dual load reflex configuration makes it possible to obtain a high level of efficiency, as well as a considerably extended low range frequency response and extremely reduced distortion. ? The ample exponential profile of the cone guarantees a linear excursion, and thus harmonic distortion at the low frequencies is reduced. ? The rear part of the 12 basket includes a finned heat sink which prevents the coil from overheating. In order to encourage air circulation ? Designed to reduce both overheating and vibration problems, the coil technology is based on a reinforced kapton support and heavy-duty adhesives (resistant up to 3000C). ? As the subwoofer range is non-directional, the unit can he situated in the most convenient place, even in a semi-hidden position. ? The MSW 8 has been designed for perfect combination with the Monitor 8, as setting this speaker unit on top of the subwoofer creates a system that is aesthetically consistent, also thanks to the uniform width. The MSW8 can also he used with the MR 5S or MR 5SW speaker.
TECHNICAL SPECIFICATIONS
SUB WOOFER Power : Sensitivity : Frequency Response : Impedance : Maximum SPL : Dimensions : Weight : LF 12? 300W 94dB 1W @ 1m 38 Hz ? 150 Hz ± 3 dB 8 Ω 120 dB 290 x 800 x 508 mm 36 kg

The black Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.

Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.

12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner

LF Driver 1 x 12" / 305 mm
Input Spring-loaded speaker terminals
Output Spring-loaded speaker terminals
Frequency Response 40 to 140 Hz (-10 dB)
Sensitivity 104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W)
Maximum SPL 127 dB calculated, 133 dB peak
Power Handling 800 W peak (200 W with continuous pink noise for 100 hours)
Low Impedance Yes
Nominal Impedance 8 Ohms
Dimensions (H x W x D) 16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm
Weight 39.2 lb / 17.8 kg

EVID 12.1 EVID Series Premium Surface Mount Subwoofer

To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.

Specifications
Max. SPL / 1m (calc); full space 125 dB 
System Power Handling (continuous/program/peak) 175/350/700 Watts 
Nominal Impedance 6 Ohms 
Minimum Impedance 6 Ohms 
Flying No 
Frequency Response (-10dB) 40 - 140 Hz 
Input Connections Spring Terminal 
Internal Crossover Yes 
Sensitivity 1W/1m 100 dB 
Chassis Size 12 inches 
Weight Net 18.1 kg ( 39.9 lbs ) 
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")

The white Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.

Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.

12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
LF Driver 1 x 12" / 305 mm
Input Spring-loaded speaker terminals
Output Spring-loaded speaker terminals
Frequency Response 40 to 140 Hz (-10 dB)
Sensitivity 104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W)
Maximum SPL 127 dB calculated, 133 dB peak
Power Handling 800 W peak (200 W with continuous pink noise for 100 hours)
Low Impedance Yes
Nominal Impedance 8 Ohms
Dimensions (H x W x D) 16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm
Weight 39.2 lb / 17.8 kg

FB-120W

Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W

Impedance: 8Ω

Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field

Frequency Response: 40Hz-1.2kHz (+/-10dB)

Dimensions: 16“?16“?17.75" (W?H?D)

Weight: 15kg

Features - Compact subwoofer system for installations – 12″ double coil loudspeaker – Right/Left inputs – Filtered right/left outputs – Wall mount accessory The Arco 12 Sub incorporates the new 122S dual coil 12” loudspeaker for bass reproduction which provides low frequency output to 30 Hz. The dual voice coil configuration of the loudspeaker allows the cabinet to reproduce both the left and right channel subwoofer frequencies. The Arco 12 Sub cabinet uses a band-pass configuration. The enclosure is manufactured in MDF and is available in a black paint finish. An optional mounting accessory permits wall mounting. The connector panel provides stereo inputs and high-pass filtered satellite outputs for either Arco 4 or Arco 24 systems. The Arco 12 Sub is ideal for foreground music and music/paging systems requiring bass reinforcement. Possible applications include restaurants, retail outlets, bars, music cafes, fitness centers, or any other indoor application. Technical Data
Power Handling 170 W Cont. Program/Coil
Frequency Range (-10 dB) 30 Hz-180 Hz
Nominal Impedance 8 + 8 ohms
Sensitivity 1 W/1 m 106 dB SPL
Rated Peak SPL at 1 m 134 dB
Internal Crossover In: 12dB/oct low pass 180 Hz Out: 6 dB/oct high-pass
Connectors Sping-Loaded Terminals
Enclosure Material MDF
Color/Finish Black Paint
Dimensions (H x W x D) 36 x 59.2 x 28.5 cm 14.2 x 23.3 x 11.2 in
Weight 14 kg (30.8 lb)
Weight36.00 kg17.80 kg20.00 kg17.80 kg15.00 kg14.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 36.00 kg
Weight 17.80 kg
Weight 20.00 kg
Weight 17.80 kg
Weight 15.00 kg
Weight 14.00 kg

Related products