| Content | Features
- 1400 Watt Digital Amplifier
- 15" Woofer, bass reflex housing
- Stereo crossover
- Switchable crossover frequencies
- Phase-reverse switch
- Electronic equalization, soft limiter and protection
- Stereo XLR input, Stereo XLR signal output
Acoustical Specifications
- Frequency Response -3 dB: 40 Hz ÷ 120 Hz
- Max SPL: 131 dB
- Woofer: 15“, 3.0" v.c.
Input/Output Section
- Input connectors: Stereo XLR
- Output connectors: Stereo XLR
- Input sensitivity: -2 dBu / + 4 dBu
Processor Section
- Crossover frequencies: 80-110 Hz Hz
- Protections: thermal, rms
- Limiter: soft limiter
- Controls: Volume, EQ, phase, xover
Amplifier Specifications
- Total power: 1400 W PEAK
- Low frequencies: 1400 W PEAK
- Total power: 700 W RMS
- Low frequencies: 700 W RMS
- Cooling: convection
- Connections: VDE connector
Cabinet
- Cabinet Material: Baltic birch plywood
- Hardware: Pole mount
- Handles: 2 side
- Pole Mount/Cap: yes
- Grille: Steel
- Colour: Black
Physical Specifications
- Height: 568/22.36 mm/inch
- Width: 430/16.93 mm/inch
- Depth: 595/23.43 mm/inch
- Net Weight: 28.0/50.70 kg/lbs
The data are not binding; RCF reserves the right to modify the data at any time and without previous notice. |
- Two channel XLR/1/4 combination inputs
- Delay 0-150ms
- Power amp VU meter with LCD display
- Mic/line level selection
- Internal temperature monitor with variable speed cooling fan
- Auto power off
- On-board advanced digital signal processing
- Setup Wizard for easy configuration
- Heavy-duty locking casters
- Assignable crossover
- Ultra-braced cabinet assembly
- Direct-Thru output with combine function
- Power amp forced air cooling for maximum reliability
- Processed Thru output enables DSP to be used with external speaker cabinet
- Dual 15" woofers
- Ground lift
- Bass enhancement
- Pole mount
- Digital compression/limiting; 9-band EQ
- Heavy-duty steel perforated grille
- 2,000 Watts total peak power
- Weight Packed: 70.3 kg
- Width Packed: 72.39 cm
- Height Packed: 97.79 cm
- Depth Packed: 64.77 cm
| The JBL PRX815XLFW is a self-powered extended low-frequency subwoofer system. Featuring a JBL 15-inch woofer powered by a 1500-watt class-D amplifier, PRX815XLFW delivers incredible output in a lightweight and compact form factor. |
15" Powered Subwoofer
- QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
- Cardioid Control Technology allows output to be steered towards the audience with up to 35 dB reduction on stage when multiple subs are deployed.
- High-efficiency 1300 W Class D power amplifier delivers up to 133 dB peak SPL on the EKX-15SP utilizing high-sensitivity transducers designed and engineered by EV.
- Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions.
- Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate.
| Width |
530mm (20.87“) |
| Height |
455mm (17.91“) |
| Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
| Enclosure Material |
15 mm, plywood with EVCoat |
| Family |
EKX |
| Frequency Response (-3 dB) |
45 Hz - 150 HzkHz (Half Space Measurement) |
| Grille |
18 AWG steel with powdercoat |
| LF Transducer |
EVS-15C 381 mm (15 in) |
| Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
| Max. SPL/1m (calc) |
133dB |
| Maximum SPL |
133 dB peakdB (Maximum SPL is measured at 1 m using broadband pink noise at maximum output) |
| Power Consumption |
1.8 A (Current rating is 1/8 power) |
| Power Rating |
1300W |
| Powered or Passive |
Powered |
| Shipping Weight |
32.6kg (71.87 lbs) |
| Speaker Type |
Subwoofer |
| Woofer Size |
15inch |
| requency Range (-10 dB) |
40 Hz - 180 HzkHz (Half Space Measurement) |
| Weight Net |
26.2kg (57.76 lbs) |
| Depth |
551mm (21.69“) |
|
Specifications
|
| Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
|
- Powered 2.1 PA with 15" subwoofer and two 8" satellites
- Total power: 2060 W
- Integrated 6-channel mixer with EQ and reverb
- Selectable input for microphone, Hi-Z or Line
- Digital SPDIF TOSLINK stereo input
- Wireless streaming via Bluetooth
- Homogeneous dispersion thanks to newly developed waveguides
- DynX® DSP for distortion-free sound reproduction
- Selectable presets depending on the setup (stereo / cluster mode)
- Durable polyurea coating for subwoofer and satellites
General
Product type
PA Complete Systems
System output (RMS)
1030 W
System output (Peak)
2060 W
Max. SPL (Avarage)
124 dB
Frequency response (-10dB)
33 - 20000 Hz
Crossover frequency
105 Hz
Dispersion (H x V)
90° x 30 °
Subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Multiplex, 18 mm Multiplex
Subwoofer features
3 Reverb presets, 6 channel mixer, Bluetooth, Cluster / Stereo Preset, M20, SPDIF
Mid/Hi System
Midrange dimensions (mm)
203.2 mm
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.6 mm
Tweeter dimensions
2 x 0.5 "
Tweeter dimensions (mm)
2 x 12.7 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Mid/Hi system speaker connections
1
Mid/Hi system speaker connections
Speakon compatible
Cabinet construction mid/high
Bass Reflex
Carrying Handles Mid / Hi System
1
Mid/Hi system cabinet material
12 mm Multiplex, 15 mm Multiplex
Mid/Hi system cabinet surface
Polyurea
Mid/Hi system width
275 mm
Mid/Hi system height
470 mm
Mid/Hi system depth
260 mm
Mid/Hi system weight
9.7 kg
Mid/Hi system features
Dual - Tilt flange, Midrange Waveguide
Amplifier module (integrated in subwoofer)
Amplifier output subwoofer (RMS)
500 W
Amplifier Output Mid/Hi (RMS)
2 x 265 W
Protection circuits
limiter, overload, short circuit
Operating Temperature
0°C - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
Input type, Input volume, Low / High EQ, Main volume, Power, Reverb, Stereo / Cluster mode, Sub / High level
Indicators
Limit, Power, Protect, Signal
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Multi input
2 x switchable (MIC, LINE, HI-Z)
Multi input connector
Combo XLR
Line input connectors
Combo XLR, RCA
Digital input connectors
SPDIF
Speaker output connections
Speakon compatible
Bluetooth Audio Decoder
SBC
|
Reviews
There are no reviews yet.