| Content | Features
- 1400 Watt Digital Amplifier
- 15" Woofer, bass reflex housing
- Stereo crossover
- Switchable crossover frequencies
- Phase-reverse switch
- Electronic equalization, soft limiter and protection
- Stereo XLR input, Stereo XLR signal output
Acoustical Specifications
- Frequency Response -3 dB: 40 Hz ÷ 120 Hz
- Max SPL: 131 dB
- Woofer: 15“, 3.0" v.c.
Input/Output Section
- Input connectors: Stereo XLR
- Output connectors: Stereo XLR
- Input sensitivity: -2 dBu / + 4 dBu
Processor Section
- Crossover frequencies: 80-110 Hz Hz
- Protections: thermal, rms
- Limiter: soft limiter
- Controls: Volume, EQ, phase, xover
Amplifier Specifications
- Total power: 1400 W PEAK
- Low frequencies: 1400 W PEAK
- Total power: 700 W RMS
- Low frequencies: 700 W RMS
- Cooling: convection
- Connections: VDE connector
Cabinet
- Cabinet Material: Baltic birch plywood
- Hardware: Pole mount
- Handles: 2 side
- Pole Mount/Cap: yes
- Grille: Steel
- Colour: Black
Physical Specifications
- Height: 568/22.36 mm/inch
- Width: 430/16.93 mm/inch
- Depth: 595/23.43 mm/inch
- Net Weight: 28.0/50.70 kg/lbs
The data are not binding; RCF reserves the right to modify the data at any time and without previous notice. |
- Two channel XLR/1/4 combination inputs
- Delay 0-150ms
- Power amp VU meter with LCD display
- Mic/line level selection
- Internal temperature monitor with variable speed cooling fan
- Auto power off
- On-board advanced digital signal processing
- Setup Wizard for easy configuration
- Heavy-duty locking casters
- Assignable crossover
- Ultra-braced cabinet assembly
- Direct-Thru output with combine function
- Power amp forced air cooling for maximum reliability
- Processed Thru output enables DSP to be used with external speaker cabinet
- Dual 15" woofers
- Ground lift
- Bass enhancement
- Pole mount
- Digital compression/limiting; 9-band EQ
- Heavy-duty steel perforated grille
- 2,000 Watts total peak power
- Weight Packed: 70.3 kg
- Width Packed: 72.39 cm
- Height Packed: 97.79 cm
- Depth Packed: 64.77 cm
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
|
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 115S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 15" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 15" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 131 dB
- frequency range: 46-150 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 18.13" W x 18.25" H x 25.13" D
- weight: 52.2 lbs.
- warranty: 1 year
- MFR # THUMP115S
What's in the box:
- Powered 15" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
| Professional 500-Watt powered subwoofer for PA applications. Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass. Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact. State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection. Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers. Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance. Variable High Cut control for perfect sound alignment. Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers. Power, Signal and Clip LEDs for perfect monitoring. Intelligent limiter for maximum sound performance and woofer protection. Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Pole socket for mounting with commercial spacer poles. Ergonomically shaped handles for easy transport. Rugged steel grill for optimal speaker protection. Weight 33 Kgr. |
15" Powered Subwoofer
- QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
- Cardioid Control Technology allows output to be steered towards the audience with up to 35 dB reduction on stage when multiple subs are deployed.
- High-efficiency 1300 W Class D power amplifier delivers up to 133 dB peak SPL on the EKX-15SP utilizing high-sensitivity transducers designed and engineered by EV.
- Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions.
- Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate.
| Width |
530mm (20.87“) |
| Height |
455mm (17.91“) |
| Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
| Enclosure Material |
15 mm, plywood with EVCoat |
| Family |
EKX |
| Frequency Response (-3 dB) |
45 Hz - 150 HzkHz (Half Space Measurement) |
| Grille |
18 AWG steel with powdercoat |
| LF Transducer |
EVS-15C 381 mm (15 in) |
| Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
| Max. SPL/1m (calc) |
133dB |
| Maximum SPL |
133 dB peakdB (Maximum SPL is measured at 1 m using broadband pink noise at maximum output) |
| Power Consumption |
1.8 A (Current rating is 1/8 power) |
| Power Rating |
1300W |
| Powered or Passive |
Powered |
| Shipping Weight |
32.6kg (71.87 lbs) |
| Speaker Type |
Subwoofer |
| Woofer Size |
15inch |
| requency Range (-10 dB) |
40 Hz - 180 HzkHz (Half Space Measurement) |
| Weight Net |
26.2kg (57.76 lbs) |
| Depth |
551mm (21.69“) |
|
Specifications
|
|
Reviews
There are no reviews yet.