| Content | The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.
The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.
To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive.
Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality.
This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier.
Simply switch on, sit back and enjoy!
- Input sensitivity: 5mV for 500mV output
- Input loading: 47k +100pF
- Maximum input level: 70mV @ 1kHz
- Output Impedance: 100 Ohms
- Signal to noise ratio: 78dBA ref 5mV
- Power requirements: 24VAC 85mA
- Input for full scale digital output: 7.5mV
- Dimensions W 102mm x D 125mm x H 30mm
|
Developed by our engineers, the new Ear benefits from a completely new surface mount PCB layout based on the hugely successful Brio-R amplifier. Exceptional performance is guaranteed with the convenience of independent mute, volume control and multiple connectivity options to integrate perfectly into any users system.
Power Supplies & Noise Reduction
The Ear pushes the Brio-R power amplifier circuit concept to a new level with the use of a low noise, fully regulated, supply. Noise has also been kept to a minimum by the use of an external mains transformer. The Ear exceeds the voltage requirements of IEC 268-15. This along with low output impedance makes it suitable for studio use as well as a hi-fi headphone amplifier. The Ear operates in Class A at normal listening levels.
High Quality Components
The Ear utilises the highest quality components and our engineers’ experience, to achieve the best sonic performance. Utilising the design ideals of the ‘cascaded emitter follower output stage’ with a pair of complementary Darlington output transistors, along with polyester film and Nichicon FG capacitors in critical positions, ensures it is our most advanced performing headphone amplifier to date.
Custom Case
Housed in a compact custom case, the Ear is designed to match the current range of Rega electronics with a matching, high gloss, front facia.The new Ear Headphone amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers. The Ear simply connects to the tape output of an amplifier via phono leads. The headphones are plugged into the front panel and there is a link socket in case you need your tape output sockets for other use.
Hi Fi News reviews the Rega Ear headphone amplifier:
\'The Rega Ear is lovely, in so many ways. It is beautifully made, stylish and has all the facilities you really need, plus a delightful sound that stirs the soul regardless of whatever music you put through it. Wonderfully expansive and big hearted, it makes listening a pleasure. Tonally it\'s slightly on the warm side, so suits poor quality sources down to the ground - even an iPad sounds good via the Rega!\' - January 2014.
- Maximum output level - 25 load 775mW, 32 load 685mW, 50 load 530mW, 100 load 320mW, 600 load 60mW
- Open circuit voltage 6v
- Input impedance 20K, Gain 28dB
- Frequency response 12Hz to 37kHz
- THD typically 0.003%
- Signal to noise ratio referenced to max output level -100dB (22Hz – 22kHz)
- Maximum Power requirements - 24VAC at 225mA (685mW 32)
- Dimensions: W 178mm x D 155mm x H 45mm.
|
High rigidity metal frame
• Shielded power supply
• Separated toroidals for analogue and digital
• Rubber insulated aluminium feet
• WBT and Neutrik connectors
• Fully discrete analogue design
• Motorized ALPS blue series volume
control
• Buffer and Gain cards on socket for future
upgrades
• Metal machined remote control
• Trigger signal for link to Monoblock amplifier
|
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Configurable output routing (2 channel models only) Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models |
- Input impedance : 47kohms
- Input capacitance : 120pF
- Gain : 40dB
- Output voltage(typically) : 500mV @ 1KhZ with 5mV input
- Noise floor : 88dB (A weighted)
- THD :
| Preamplifier PHONO
*Transforms phono to line
*Input stereo rca, output stereo rca & 1/4” TRS
*Power supply DC 12V included |
Reviews
There are no reviews yet.