| Content | This wired remote has been designed for direct access to the most frequently used actions and commands of TotalMix FX, being an indispensable tool in the studio's daily applications. Its extremely flexible configuration through TotalMix FX will simplify workflow and greatly increase the usability of the RME interface in most real world situations. The ARC USB is a USB 1.1 (UAC1) MIDI remote control, natively compatible to Windows and Mac OS X. As soon as it is present in the operating system TotaIMix FX will detect it and communicate with it, without disturbing other remote controls. Therefore it is also not necessary to switch the ARC USB on or off within TotalMix FX - it will just work. And because it communicates with TotalMix FX (via USB) it is compatible to all RME audio interfaces that are detected and supported by TotalMix FX. This goes back to RME interfaces released 2001!
As soon as the ARC USB is connected to a computer any button press or wheel turning will cause the respective action performed by TotalMix FX - and therefore also by the RME audio interface. With the UFX+ and UFX II the ARC USB can also be connected directly to these devices, currently the only RME interfaces having an internal USB 1.1 host with matching connector. This way of connecting is handy in stand-alone mode, where the ARC USB is also supported by the UFX+ and UFX II.The ARC USB is bus powered, but draws only little current. Also it uses USB 1.1 as bus standard, which these days is uncritical due to its lower frequency and speed demands. USB 2 cables with 5 meter to 10 meter length, and cheap USB 2 cable extensions that usually make a bus-powered interface fail will work perfectly for the ARC USB. Still at higher lengths RME recommends to use active USB 2 cables (also called extension or repeater cables), which are not expensive and work over lengths of more than 20 meters.
The ARC USB can control several interfaces simultaneously, which happens automatically as the Key Commands dialog in TotalMix FX is specific to the currently selected audio interface. Just assign only the functions that are desired for each respective interface. After that the ARC USB keys and the encoder wheel remote the respective interface where they have been assigned to, without the need to further switch or select anything in normal operation.
Remote Control
Easy operation of TotalMix FX software
Compatible with RME Fireface UFX + and UFX II (direct) and all RME devices with TotalMix FX (via computer)
Controls the DSP-based routing and effects section
USB or remote interface (stand-alone operation)
15 programmable illuminated function buttons
Programmable connection for foot switch
Jog wheel for parameter change
Compatible with RME UFX +
Parallel operation of several interfaces possible
Mac OS and Windows compatible
ARC USB AND UFX+ / UFX II IN STAND-ALONE MODE
In stand-alone mode of Fireface UFX+ / UFX II a fixed set of functions is activated on the keys:
Row 1: Setup 1-4
Row 2: Setup 5-6 x x
Row 3: Mono, Volume Phones 1, Volume Phones 2, DIM
Lower keys: DURec: Rec, Play/Pause, Stop
x = no function
The included stickers also offer the stand-alone layout.
In the UFX+ / UFX II display’s menu the way of operating the ARC USB can be configured for stand-alone mode. Those options are found under SETUP/REV, Options, Hardware/Diagnosis:
STANDALONE ARC VOLUME
Deactivates all keys. Only the encoder wheel works, with a fixed assignment to Main Volume.
This option is also a safety function in case the ARC USB is connected to the UFX+ / UFX II, but oper-ated online (with computer). When the system goes offline (computer removed, sleep state…) the functions on the keys change, because online mode changed to stand-alone mode. Operating the keys then could activate unintended functionality or changes.
STANDALONE ARC 1 S OP
Each key has to be pressed for one second to activate the programmed functionality. This safety function prevents unintentional changes. It can be stored within the Setups, activating this mode automatically when such a Setup is loaded. When loading a Setup where this function had not been active this mode is automatically deactivated at the UFX+ / UFX II. |
Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.
The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.
The 8pre as your primary audio interface
Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.
The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.
The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
The 8pre as a microphone preamp expansion interface
The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.
If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.
|
Computer Based Recording Packages
Computer-Based Recording Packages For All Players Of Musical Instruments
The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.
Size/Weight
| Dimensions | Width | 170mm (6-3/4“) | | Height | 59mm (2-3/8“) | | Depth | 192mm (7-5/8“) | | Weight | Weight | 770g (1.7 lbs.) |
General Specifications
| Sampling Frequency Rate | USB AUDIO 1.1, 16bit/44.1kHz |
Effects
| Types | Dynamic | 1-knob Compressor (COMP) x 2 |
Storage and Connectivity
| Connectivity | Headphones | Stereo Phone connector x 1 | | Microphone | Mic/Hi-Z input x 2 | | LINE IN | Phone connector x 4 (L/MONO x 2, R x 2) | | LINE OUT | Phone connector x 2 (L, R) | | USB TO HOST | USB (TO HOST) |
Power Supply
System Requirements
| Windows | PC | Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface | | CPU | 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor | | Support OS | Windows Vista / Windows XP Professional / XP Home Edition | | Memory | More than 1 GB More than 128 MB | | Macintosh | PC | Macintosh computer with built-in USB interface | | CPU | Intel CPU / Macintosh G3 processor 300 MHz or better | | Support OS | Mac OS X 10.3.3 or higher | | Memory | More than 128 MB |
Accessories | Included Accessories | Cable | USB Cable | | Others | CUBASE AI DVD, Owners Manual |
|
UA-20: Audio Capture USB Audio/MIDI Interface
Features
The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.
- Audio and MIDI in a compact unit.
- Fully equipped with I/O jacks.
- Great tool for creating music.
- Edirol's FPT Technology.
Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.
| U-CONTROL UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output and Massive Software Bundle
Behringer U-Control UCA202
- 2 In/2 Out USB Audio Interface
- Mac or PC, no drivers required
- 16-bit/48kHz converters
- Low latency
- Headphone output
- S/PDIF optical out
- USB powered
- Free Software
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Works with your PC or Mac computer—no setup or drivers required
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
- Additional S/PDIF optical output for direct digital conversion
- Powered via USB—no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The Smallest, Most Portable 2x2 USB Interface Around!Are you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCA222 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications.
High-Quality, Industry Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA222 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal -- 1/8-inch mini-jack. Again, the Behringer UCA222 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA222.
Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA222 solves this problem by placing your sound card at the end of a USB cable run far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution.
Super Simple Setup
As a USB device, the UCA222 is the textbook example of a Plug-N-Play device. Compatible with both Windows and Mac systems, the UCA222 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA222 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware.
The applications for the Behringer UCA222 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA222 is just about the easiest way to add a professional audio interface to your computer. |
- Hybrid FireWire/USB2 connectivity — connect to your computer via either bus-powered FireWire or hi-speed USB2.
- CueMix FX™ — flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
- 10 inputs / 14 outputs — there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
- Classic Reverb™ — provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
- Two forms of compression — a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler™, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
- Modeled EQ — provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
- CueMix FX cross-platform mixing software — attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
- Front-panel control — access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
- “Reverb return" stream — allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
- Stand-alone operation — program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig — no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
- Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear — with no latency.
- Two combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
- Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
- Precision Digital Trim™ — Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
- Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
- Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
- Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
- Expandable — add additional interfaces for more I/O as your needs grow.
- Separate TRS main outs with front panel volume control.
- Stereo 24-bit 96kHz S/PDIF in/out.
- Includes drivers for Mac & PC, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
- 100% compatible with all host-based effects processing in today's popular audio programs.
- Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
- Plug-and-play operation with your Mac or PC via FireWire or USB2.
- Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available.
- Front panel headphone jack with volume control.
- Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.
- Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high.
|
Reviews
There are no reviews yet.