Rode Lavalier GO White Condenser Omni-directional Microphone

65.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Perfectly matched to Rode Wireless GO Compatible e.g. with notebooks, DSLR cameras and mobile recorders Broadcastable sound quality Sound pressure level limit: 110 dB 3.5 mm TRS jack plug with gold-plated contacts Weight: 12 g  

 

Read more

Perfectly matched to Rode Wireless GO
  • Compatible e.g. with notebooks, DSLR cameras and mobile recorders
  • Broadcastable sound quality
  • Sound pressure level limit: 110 dB
  • 3.5 mm TRS jack plug with gold-plated contacts
  • Weight: 12 g

 

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “Rode Lavalier GO White Condenser Omni-directional Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Rode Lavalier GO White Condenser Omni-directional Microphone removeShure WL51B & WL51W Lavalier Condenser Microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeAUDIO TECHNICA PRO70 CONDENSER LAVALIER MICROPHONE removeLD SYSTEMS LDWS100ML Lavallier microphone for LDWS100 removeAKG C 417L professional miniature condenser microphone remove
NameRode Lavalier GO White Condenser Omni-directional Microphone removeShure WL51B & WL51W Lavalier Condenser Microphone removeShure WL93 & WL93T Lavalier Omni Condenser Microphone removeAUDIO TECHNICA PRO70 CONDENSER LAVALIER MICROPHONE removeLD SYSTEMS LDWS100ML Lavallier microphone for LDWS100 removeAKG C 417L professional miniature condenser microphone remove
Image
SKUH11RD00079WL51B & WL51WWL93 & WL93TPRO70LDWS100MLC 417L
Rating
Price 65.00 incl. GR VAT 291.00 incl. GR VAT 198.00 incl. GR VAT 145.00 incl. GR VAT 54.03 incl. GR VAT 123.00 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPerfectly matched to Rode Wireless GO
  • Compatible e.g. with notebooks, DSLR cameras and mobile recorders
  • Broadcastable sound quality
  • Sound pressure level limit: 110 dB
  • 3.5 mm TRS jack plug with gold-plated contacts
  • Weight: 12 g
 





    All models include foam windscreen, swiveling lapel clip, dual tie clip, pin mount, magnet mount
    Subminiature size (5.8 mm diameter x 11 mm height)
    Electret condenser cartridge
    Unidirectional pattern
    One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
    High Boost equalization caps included for optimal clarity and response
        Provides a 10 dB boost centered at 12 kHz

    Used in applications that require a chest-worn microphone

Black and white models available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens and carry case
requency response: 20-20,000 Hz
Low visibility with a variety of options for mounting
Low handling noise
Legendary Shure quality, ruggedness, and reliability



Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Response Curve Image Small SM93 WL93 View Larger Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)

This miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
Natural and articulate vocal reproduction when used as a clip-on lavalier - clothing clip included
Excels in pickup of acoustic guitar with included instrument adapter
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Switchable low-frequency roll-off
Corrosion-resistant contacts from gold-plated XLRM-type connector
Operates on battery or phantom power
6\' (1.8 m) cable permanently attached between microphone and power module

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 100-14,000 Hz
Low Frequency Roll Off: 80 Hz, 8 dB/octave
Open Circuit Sensitivity: Phantom: -45 dB (5.6 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 200 ohms
Maximum Input Sound Level: Phantom: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Output Connector: Integral 3-pin XLRM-type
Cable: Integral 6\' (1.8 m), permanently attached between microphone and power module
Accessories: AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch

Lavaliere Microphone for WS 100 BP Belt Pack and for WS 1616 BP Belt Pack

  • Uni-directional Electret Condenser Lavaliere Microphone
  • Impedance
  • Frequency range : 20 Hz – 20 KHz
  • Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type Wireless Microphone System Accessories
Type Microphones
Frequency response 20 - 20.000 Hz
Directivity cardioid
Nominal impedance 680 Ohm(s)
Phantom power requierements 5 V
Microphone input mini-XLR (3-pin, female)
Accessories (included) attaching clip , Foam windscreen
Weight 0,04 kg

Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.

Weight0.50 kg0.20 kg0.20 kg0.30 kg0.03 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.30 kg
Weight 0.03 kg
Weight 0.30 kg