RODE VIDEOMIC GO DVCAM DIRECTIONAL CONDESER MICROPHONE

73.15 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Clear, directional audio on the GO! Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise. The integrated Rycote® Lyre® […]

 

Read more

Clear, directional audio on the GO!

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera’s external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

Acoustic Principle Line Gradient
Frequency Range 100Hz ~ 16,000Hz
Equivalent Noise 34dBA SPL (A – weighted per IEC651)
Signal Noise 60dB SPL (A – weighted per IEC651)
Power Required Plug-in power required (330uA @ 2.5V)
Dimensions 167mmL x 79mmH x 70mmD
Directional Pattern Super-Cardioid
Sensitivity -35dB re 1V/Pa (17.8mV @ 94dB SPL) ±2dB @ 1kHz
Maximum SPL 120dB (@ 1kHz, 1% THD into 1kΩ load)
Dynamic Range 96dB (per IEC651)
Output Connection 3.5mm stereo mini-jack
Weight 73g

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “RODE VIDEOMIC GO DVCAM DIRECTIONAL CONDESER MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE VIDEOMIC GO DVCAM DIRECTIONAL CONDESER MICROPHONE removesE ProMic Laser DSLR On-Camera Shotgun Microphone removeAUDIO TECHNICA BP4071L BROADCASTING MICROPHONE 21.22" long removeRODE NTG4 SUPER CARDIOID SHOTGUN MICROPHONE removeAUDIO TECHNICA AT8015 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE NTG4+ SUPER CARDIOID SHOTGUN MICROPHONE -USB RECHARGEABLE- remove
NameRODE VIDEOMIC GO DVCAM DIRECTIONAL CONDESER MICROPHONE removesE ProMic Laser DSLR On-Camera Shotgun Microphone removeAUDIO TECHNICA BP4071L BROADCASTING MICROPHONE 21.22" long removeRODE NTG4 SUPER CARDIOID SHOTGUN MICROPHONE removeAUDIO TECHNICA AT8015 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE NTG4+ SUPER CARDIOID SHOTGUN MICROPHONE -USB RECHARGEABLE- remove
Image
SKUH11RD00042ProMic LaserBP4071LH11RD00046AT8015H11RD00047
Rating
Price 73.15 incl. GR VAT 126.29 incl. GR VAT 1,134.00 incl. GR VAT 269.00 incl. GR VAT 368.00 incl. GR VAT 279.00 incl. GR VAT
Stock

Only 1 left in stock

In stock

In stock

Only 1 left in stock

In stock

Only 1 left in stock (can be backordered)

AvailabilityOnly 1 left in stockIn stockIn stockOnly 1 left in stockIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Clear, directional audio on the GO!

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

Acoustic Principle Line Gradient
Frequency Range 100Hz ~ 16,000Hz
Equivalent Noise 34dBA SPL (A - weighted per IEC651)
Signal Noise 60dB SPL (A - weighted per IEC651)
Power Required Plug-in power required (330uA @ 2.5V)
Dimensions 167mmL x 79mmH x 70mmD
Directional Pattern Super-Cardioid
Sensitivity -35dB re 1V/Pa (17.8mV @ 94dB SPL) ±2dB @ 1kHz
Maximum SPL 120dB (@ 1kHz, 1% THD into 1kΩ load)
Dynamic Range 96dB (per IEC651)
Output Connection 3.5mm stereo mini-jack
Weight 73g

ProMic Laser is our first ever DSLR on-camera microphone - a shotgun condenser microphone with a precision-tuned capsule for capturing professional-quality audio direct to camera.

With more and more video recording enthusiasts taking an increased interest in the quality of the audio of their videos, ProMic Laser provides the high-quality audio to match the high-definition video capabilities of todayʼs DSLR cameras.

Laser, the first release in the ProMic series, is a truly professional solution. It has a rugged aluminium design and comes with a removable wind shield and a custom shockmount for hot-shoe mounting directly onto a DSLR camera.

Laser is battery-powered using a single AAA battery (not included), which means that the microphone has an increased sensitivity level, and a lower noise floor, but the inclusion of a -10dB Pad allows you to reduce the level of the mic for recording louder sources.

The microphone also features a Bass Cut, which gives you the option of removing unwanted low frequency rumble, such as traffic or noise from the camera itself, and this can be used in tandem with the -10dB Pad.

As with all sE Electronics products, ProMic Laser comes with a three-year free replacement warranty, which means if it lets you down, weʼll simply give you a new one.

ProMic Laser comes with a protective carry bag and a 3.5mm coiled jack-to-jack cable to connect the microphone to your camera. Laser is compatible with the upcoming ProMic accessories series, which includes boom poles and fur windshields.

Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 4.8 mA typical
Weight: 175 g (6.2 oz)
Dimensions: 539.0 mm (21.22“) long, 21.0 mm (0.83“) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case


Broadcast sound quality
Low noise circuitry
Rugged metal construction
Convenient digital switching
High Frequency Boost
High Pass Filter (Flat/75Hz)
PAD (-10db)
Ten year extended warranty with online registration
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.

Visit the NTG4 feature page

NTG4 Specifications
Acoustic Principle    Line Gradient
Capsule    0.50“
Polar Pattern    Supercardioid
Address Type    End
Frequency Range    20Hz - 20kHz(selected HPF @75Hz)
Output Impedance    200Ω
Maximum SPL    135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    16dB-A
Power Options    +12V phantom power+24V phantom power+48V phantom power
Weight    126gm
Dimensions    225mmH x 22mmW x 22mmD
Output    XLR Output
Warranty    1 year with free extension to 10 years following registration

Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
Impedance: Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off
Weight: 195 g (6.9 oz)
Dimensions: 460.0 mm (18.11“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8135 windscreen; battery; protective carrying case

Broadcast sound quality Low noise circuitry Internal rechargeable lithium battery, supplying over 150 hours operation Fully charged in under two hours via MicroUSB Rugged metal construction Convenient digital switching High Frequency Boost High Pass Filter (Flat/75Hz) PAD (-10db) MicroUSB cable included Ten year extended warranty with online registration Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching. The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging. Visit the NTG4+ feature page NTG4+ Specifications Acoustic Principle    Line Gradient Capsule    0.50“ Polar Pattern    Supercardioid Address Type    End Frequency Range    20Hz - 20kHz(selected HPF @75Hz) Output Impedance    200Ω Maximum SPL    135dB SPL (@ 1kHz, 1% THD into 1KΩ load) Sensitivity    -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted)    16dB-A Power Options    +12V phantom power+24V phantom power+48V phantom powerInternal battery Weight    176gm Dimensions    278mmH x 22mmW x 22mmD Output    XLR Output Warranty    1 year with free extension to 10 years following registration
Weight0.10 kg1.00 kg0.30 kg0.20 kg0.30 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 1.00 kg
Weight 0.30 kg
Weight 0.20 kg
Weight 0.30 kg
Weight 0.20 kg