Content |
The dB1500a is a self-powered subwoofer featuring a heavy-duty 15" low frequency driver with butyl surround, complemented by a 1000 Watt power amplifier. The dB1500a provides an active stereo crossover with high-passed output for running your satellite speakers. Constructed of solid 3/4 inch plywood, with steel corners, tough carpet covering and large casters. The sub-woofer features large metal grab handles and a 35mm pole mount receptacle. In fixed installation systems, the dB1500a provides super tight low frequency output in a relatively small, unobtrusive enclosure. Perfect for any sound reinforcement system where low-end is desired.
Heavy-duty, 15-inch Low Frequency Transducer
Built-in Amplifier Delivers 1000 watts of Program Power
Variable Stereo Crossover with Balanced High Pass Outputs for Satellite Speakers
Heavy-Duty, Rear Mounted Casters
Extra Large Grab handles and 35mm Pole mount receptacle
3/4" Internally braced, plywood construction
Covered in tough carpet, with steel corners
| Professional 500-Watt powered subwoofer for PA applications. Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass. Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact. State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection. Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers. Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance. Variable High Cut control for perfect sound alignment. Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers. Power, Signal and Clip LEDs for perfect monitoring. Intelligent limiter for maximum sound performance and woofer protection. Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Pole socket for mounting with commercial spacer poles. Ergonomically shaped handles for easy transport. Rugged steel grill for optimal speaker protection. Weight 33 Kgr. |
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 115S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 15" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 15" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 131 dB
- frequency range: 46-150 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 18.13" W x 18.25" H x 25.13" D
- weight: 52.2 lbs.
- warranty: 1 year
- MFR # THUMP115S
What's in the box:
- Powered 15" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 15-inch DVX woofer for maximum punch
- 1800 W Class-D power amplifier with integrated FIR-Drive DSP
- 134 dB peak SPL
- Special DSP preset for true cardioid performance across the full operating bandwidth
- Combo pole cup (insert and threaded) for use with the ETX Powered Loudspeaker full range models
- Removable casters
Frequency Range | 32 Hz - 180 Hz | Low Pass Frequency | Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz | Maximum SPL | 134 dB peak dB | Power Rating | 1800 W | Frequency Response | 37 Hz - 150 Hz | LF Transducer | DVX3159A 380 mm (15 in) | Connector Type | (2) XLR/TRS Combo Jack and (2) XLR link Output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 471 mm (18.54“) | Width | 576 mm (22.68“) | Depth | 825 mm (32.48“) | Weight Net | 41.7 kg (91.93 lbs) | Shipping Weight | 46.8 kg (103.18 lbs) |
|
- Powered 2.1 PA with 15" subwoofer and two 8" satellites
- Total power: 2060 W
- Integrated 6-channel mixer with EQ and reverb
- Selectable input for microphone, Hi-Z or Line
- Digital SPDIF TOSLINK stereo input
- Wireless streaming via Bluetooth
- Homogeneous dispersion thanks to newly developed waveguides
- DynX® DSP for distortion-free sound reproduction
- Selectable presets depending on the setup (stereo / cluster mode)
- Durable polyurea coating for subwoofer and satellites
General
Product type
PA Complete Systems
System output (RMS)
1030 W
System output (Peak)
2060 W
Max. SPL (Avarage)
124 dB
Frequency response (-10dB)
33 - 20000 Hz
Crossover frequency
105 Hz
Dispersion (H x V)
90° x 30 °
Subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Multiplex, 18 mm Multiplex
Subwoofer features
3 Reverb presets, 6 channel mixer, Bluetooth, Cluster / Stereo Preset, M20, SPDIF
Mid/Hi System
Midrange dimensions (mm)
203.2 mm
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.6 mm
Tweeter dimensions
2 x 0.5 "
Tweeter dimensions (mm)
2 x 12.7 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Mid/Hi system speaker connections
1
Mid/Hi system speaker connections
Speakon compatible
Cabinet construction mid/high
Bass Reflex
Carrying Handles Mid / Hi System
1
Mid/Hi system cabinet material
12 mm Multiplex, 15 mm Multiplex
Mid/Hi system cabinet surface
Polyurea
Mid/Hi system width
275 mm
Mid/Hi system height
470 mm
Mid/Hi system depth
260 mm
Mid/Hi system weight
9.7 kg
Mid/Hi system features
Dual - Tilt flange, Midrange Waveguide
Amplifier module (integrated in subwoofer)
Amplifier output subwoofer (RMS)
500 W
Amplifier Output Mid/Hi (RMS)
2 x 265 W
Protection circuits
limiter, overload, short circuit
Operating Temperature
0°C - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
Input type, Input volume, Low / High EQ, Main volume, Power, Reverb, Stereo / Cluster mode, Sub / High level
Indicators
Limit, Power, Protect, Signal
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Multi input
2 x switchable (MIC, LINE, HI-Z)
Multi input connector
Combo XLR
Line input connectors
Combo XLR, RCA
Digital input connectors
SPDIF
Speaker output connections
Speakon compatible
Bluetooth Audio Decoder
SBC
|
Wharfedale's titan sub a15 is a powerful active subwoofer system designed to produce high quality audio in any performance application. Optimised to complement the ultra portable titan series pa speakers, the sub a15 combines the newest technologies, materials and design to ensure absolute accuracy and high output of pure bass frequencies. The powerful 15" woofer is mounted on a 3" voice coil with integral signal processing, a dynamic automatic gain control circuit, stereo crossover and signal limiting all modelled round a built-n 400 watt (rms) amplifier, for an all-in-one bass enhancement system. A phase switch is included to allow for proper subwoofer signal polarity to be selected and with convenient and versatile connections, the sub a15 can easily be integrated into any set-up. A pair of balanced xlr output connections, with switchable "high-pass" mode are available for the stereo line level outputs, and they may also be used to send a high-pass, line-level stereo signal to a pair of powered, full-range speakers such as the popular wharfedale pro titan active models. The sheer functionality of the sub a15 means it can be utilised in any mobile dj or pa set-up, indoors or outdoors and even in fixed installations for clubs, bars, theatres or houses of worship.
TECHNICAL SPECIFICATIONS:
Road or installation use
400 watts (rms) active subwoofer
15" moisture proof custom woofer
Thermal, dc fault and short circuit protection
Peak limiter that protects the amplifier and speaker from clipping
Integral preset limiter prevents clipping and distortion
Power on and system agc protect led indicators
0°, 180° phase switch
Balanced xlr / 6.3mm (1/4“) jack combi inputs (summed stereo for 2.1 use)
2 x xlr / 6.3mm (1/4“) jack combi outputs
Integral crossovers (send a high-pass, balanced, line-level, stereo signal to powered satellite speakers or satellite speak amplifier)
Textured grey 18mm, 13 ply birch plywood enclosure
Rubberised over-moulded handles
Integral pole mount fitting
Weight: 50.0kg (including packaging)
Height: 74.0cm x Width: 73.0cm x Depth: 58.0cm
Warranty: 12 months
Power: 240V / 220V Only
|
Reviews
There are no reviews yet.