SAMSON SX1800 Power Amplifier 2X600W

Discontinued

435.56 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The SX-1800 produces 1800 Watts of power from a class AB amplifier design. Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks to the internal amplifier design and variable-speed fan cooling.    FEATURES;  Professional […]

 

Read more

The SX-1800 produces 1800 Watts of power from a class AB amplifier design.
Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at
a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks
to the internal amplifier design and variable-speed fan cooling. 
 
FEATURES;

 Professional Class AB Power Amplifier
 400 Watts per side @ 8 Ohms
 600 Watts per side @ 4 Ohms
 900 Watts per side @ 2 Ohms
 1800 Watts bridged mono @ 4 Ohms
 Dual Variable-speed Fan Cooling System
 Signal, Peak, and Protection Circuit Indicators
 5-way Binding Post and Speakon Speaker Outputs
 XLR and TRS Input connections
 Dual Rack Space Design 
 

Weight 19.00 kg

Reviews

There are no reviews yet.

Be the first to review “SAMSON SX1800 Power Amplifier 2X600W”

Your email address will not be published. Required fields are marked *

Quick Comparison

SAMSON SX1800 Power Amplifier 2X600W removeInterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm removeQSC GX-5 POWER AMPLIFIER 2x700W RMS @ 4Ω, 2x500W RMS @ 8Ω removeYAMAHA PC-4801N Power Amplifier 2x500W removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeINTERM L-2400 AMPLIFIER 2X750W remove
NameSAMSON SX1800 Power Amplifier 2X600W removeInterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm removeQSC GX-5 POWER AMPLIFIER 2x700W RMS @ 4Ω, 2x500W RMS @ 8Ω removeYAMAHA PC-4801N Power Amplifier 2x500W removeMC2 Audio E15 POWER AMPLIFIER 2 x 850w 4ohm removeINTERM L-2400 AMPLIFIER 2X750W remove
Image
SKUSX 1800V-2000010001H060.00035E15L-2400
Rating
Price 435.56 incl. GR VAT 504.06 incl. GR VAT 589.00 incl. GR VAT 1,895.00 incl. GR VAT 2,079.48 incl. GR VAT 1,198.00 incl. GR VAT
Stock

Out of stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The SX-1800 produces 1800 Watts of power from a class AB amplifier design.
Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at
a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks
to the internal amplifier design and variable-speed fan cooling. 
 
FEATURES;

 Professional Class AB Power Amplifier
 400 Watts per side @ 8 Ohms
 600 Watts per side @ 4 Ohms
 900 Watts per side @ 2 Ohms
 1800 Watts bridged mono @ 4 Ohms
 Dual Variable-speed Fan Cooling System
 Signal, Peak, and Protection Circuit Indicators
 5-way Binding Post and Speakon Speaker Outputs
 XLR and TRS Input connections
 Dual Rack Space Design 
 

InterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm bridge 1900W/4ohm

- Signal to Noise (20 Hz - 20 kHz): 100 dB
- Input Sensitivity: 1.2 Vrms
- Voltage Gain (8 Ohms): 34.4 dB
- Output Circuitry: 2-tier Class H
- Power Requirements: 6A
- Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
- Dynamic Headroom (4 Ohms): 2 dB
- Damping Factor: 100
- Input Impedance: Greater than 20k (balanced)
- Maximum Input Level: +24 dB (16 Vrms)
- Input Connectors (each channel): 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
- Output Connectors (each channel): Speakon, 1/4-inch, Binding Posts
- Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults
- Rear Panel Controls: Full Range / Crossover switch
- Dimensions (H x W x D): 3.5 x 19 x 10.1 inches (89 mm x 483 mm x 257 mm)
- Weight: 26 lbs (12 kg)

Front Panel Controls and Indicators:
- Gain controls, 21 detents
- Red Clip LEDs, proportional, 0.1% THD threshold
- Green Signal LEDs, threshold -35 dB
- Blue Power LED, AC on


Stereo Mode:
- 8 Ohms / both channels driven: 500 Watts
- 8 Ohms / single channel driven: 600 Watts
- 4 Ohms / both channels driven: 700 Watts
- 4 Ohms / single channel driven: 850 Watts

Distortion:
- 8 Ohms: less than 0.05%
- 4 Ohms: less than 0.1%

Dimensions and Weight in Packaging
Shipping Weight: 31 lbs
Shipping Dimensions: 24 x 15 x 7 in

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 500 Watt / 8Ω RMS, 2 x 800 Watt / 4Ω RMS, 1600 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.

Number of Channels: 2

Output Power: (per channel)

8 ohms     450W
4 ohms  850W
2 ohms 1550W



Output Power: (bridged)

8 ohms 1700W
4 ohms 3100W


THD%: (@1dB below max output)

@ 1kHz

L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.
Weight19.00 kg10.50 kg12.60 kg12.50 kg12.00 kg15.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.00 kg
Weight 10.50 kg
Weight 12.60 kg
Weight 12.50 kg
Weight 12.00 kg
Weight 15.60 kg