Content |
Evolution wireless D1 Instrument-Set with CL1 cable for live stage use. Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission. |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
Set composed of:
- 1 x LDWIN42R
- 1 x LDWIN42BP
- 1 x LDWS100GC
Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.
With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).
The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.
The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.
- UHF frequency range 734 - 776 MHz
- 1680 frequencies
- 20 groups with 577 fixed frequencies
- user bank with 1680 freely selectable frequencies in 25 kHz increments
- 255 addresses selectable
- channel scan
- true diversity receiver
- interchangeable microphone capsules (dynamic / condenser)
Receiver display
- volume
- radio frequency level antenna A/B
- audio level
- battery status of transmitter
- transmitter sync via infrared
- squelch setting in menu
- equalizer setting in menu
- naming template in menu
- 10 sets storable
- lockable menu
- balanced XLR output, unbalanced 6.3 mm jack
- adjustable output
- adjustable headphone output
Transmitter Display - battery status
- RF power
- AF power
- additional system information
Technical Specifications WIN42 Receiver - Model Name: LDWIN42R
- Channels: 1680 (20 groups + 1 user group)
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- THD:
- Signal/Noise ratio: >100 dB
- Audio Output: XLR balanced / 6,3 mm Jack unbalanced
- Power Supply: external power adapter 13,5 V DC, 500 mA
- Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter - Model Name: LDWIN42MD
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Power requirement: 2 x AA size batteries
- Operating time: >13 h with alkaline batteries
- Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter - Model Name: LDWIN42BP
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Input Connector: mini XLR 3-pole (phantom power for headset)
- Power requirement: 2 x AA size batteries
- Operating time: >14 h with alkaline batteries
- Dimensions (W x H x D): 87 x 25 x 63 mm
|
- The ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| Frequency Range | 480~544MHz(US & EU)
540~604MHz(US & EU)
636~700MHz(EU)
696~760MHz(EU)
760~824MHz | | | Bandwidth | 64 MHz | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | Channel Grid | 25 kHz | | | Channel Set-up | Scan & ACT sync | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | Audio Compression | 2nd Generation DSP inertial coding | | | Latency | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | S/N Ratio (analog output) | > 115dB(A) | | | T.H.D. | | | | Encryption | 256 bit | | | Receivers | | | Chassis /Channel | EIA Standard 19 " 1/2U, Single | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | Image and Spurious Rejection | > 85dB | | | Receiving Mode | Digital Diversity | | | Analog Output | Balanced XLR × 1
Unbalanced 6.3 mm (1/4 ") × 1 | | | Analog Output Switch | Mic / Line × 1 | | | Digital Audio Interface | AES3id output. BNC female × 1 | | | Digital Equalizer | 10 microphone capsule modeling presets | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | Display | Full-color VFD | | | Battery Meter | Transmitter battery status | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | Power Supply | External AC power supply, 12~15V DC, 1A; Power Consumption: 7.5W | | | Dimensions (W×H×D) | 210 × 44 × 230 mm (8.3 × 1.7 × 9 ") | | | Weight | Approx. 1.1 kg (2.4 lbs) | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | Operating Temperature | -10~+60 ℃ | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
|
Reviews
There are no reviews yet.