SGM POWERLIGHT 1212D ILME 16 DIMMER PACK

Powerlight 1212D is a 12-channel digital dimmer (12A), mounted in a sturdy
metal 3U rack container.All the controls and settings are accessible by means
of the buttons on the front panel and can be monitored on the built-in display.
The on-board microcomputer controls a comprehensive series of functions
(soft patch, channel mode, channel level, pre-heat, equalization curves, etc.).
Powerlight 1212D was designed paying great attention to reliability and adopts
avant-garde technical solutions, including internal self-diagnosis, forced ventilation
with air flow proportional to the temperature and output protection with a thermal
magnetic circuit-breaker on each channel.
Powerlight 1212D can also be used without an external controller: in fact, it's possible
to program 4 different chases with a maximum of 32 steps each.On-board software
can be upgraded via RS-232. Powerlight 1212D is available with a choice of 5 different
connector panels: ILME 24, ILME 16, Cabur, Socapex and Powercon. 

TECHNICAL DATA
12-channel digital dimmer, 12A per channel
Thermal magnetic circuit-breaker fo each channel
7 equalization curves per channel
4 Programmable chases
Switch-on with recoll of previous status
Filter ramp time (peak to peak) 250 micro sec
Software upgrade via DMX
DMX In and link-thru connectors
Automatic frequency selection (50/60 Hz)
110-220V single phase 50/60Hz power supply
380V three phase 50/60hz power supply
Forced air ventilation (Variable)
Overheating protection
Phase connection control
Self-testing with indication of any irregularities
Updatable with programming kit
(CABUR) (ILME 24)
(SOCAPEX) (POWERCON)
Dimensions: L 442 H 133 D400 )
Weight: 18 Kg
 

Digital Programmable dimmer. 6 DMX channels. 24 programmable scenes.LCD display.
Power failure memory.Each channel can be programmed with preheat level, maximum
output level, control curve and fade time.
Channel output (Single phase) 10A/Ch Total 60A.
Channel output (Three phases) 10 A/Ch Total 20A.

Zero88 Betapack3 CEE17 + DMX

Excellent value 6 channel dimmers for multipurpose use

The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available.

Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards.

The Betapack 3 range is available with MCB?s per channel giving you peace of mind and maximum protection.

The versatility of the Betapack 3 means it can be 19" rack or wall mounted using the brackets supplied or made portable by adding the optional "Easicarry" kit consisting of a handle and four feet. Its legendary reliability and durability make it the dimmer of choice for a huge variety of venues worldwide.

Zero88 Betapack3 H-W + DMX

Excellent value 6 channel dimmers for multipurpose use

The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available.

Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards.

The Betapack 3 range is available with MCB?s per channel giving you peace of mind and maximum protection.

The versatility of the Betapack 3 means it can be 19" rack or wall mounted using the brackets supplied or made portable by adding the optional "Easicarry" kit consisting of a handle and four feet. Its legendary reliability and durability make it the dimmer of choice for a huge variety of venues worldwide.

• Universal dimmer pack for professional use
• Can be operated 1-phase or 3-phase
• 6 x 10 A
• DMX control or analog control possible
• The DMX-starting address can be adjusted on the device
• Synchronization of several devices possible via DMX
• Adjusting the lamp pre-heat
• All modes are displayed via LEDs and the display
• With automatic circuit breaker per channel
• Channel-outputs on the rearpanel via pole connectors
• Only for professional use
• Preprogrammed 12 chasers
• Can be operated in 6 CH mode
• Controlling by Analog 0-10 V; stand-alone; DMX
• (19") 48.3 cm rack installation 2 U

DX-626 is a sophisticated DMX 6 Channel dimming pack. Its C3 liner dimming curve
ensures the accuracy of dimming effects on each fader scale. Each channel provides
20A output and is equipped with a 25A high-speed magnetic breaker. DX-626 has a
thermo-controlled fan which will activates automatically when the temperature is over
35°C (95°F). It can keep the system?s temperature in a safe range and reduce dust
accumulation. The 6 dimming sliders on the control panel are convenient for testing.
In addition to DMX input, it also has analog 0 ? 10 V DC input.

Features:
6 channels, each 20A.
C3 liner dimming curve.
Automatically detect power frequency (50Hz/60Hz) in different area and stabilizes the
dimming output.
The thermo-controlled fan will be activated automatically when the temperature is over 35°C
(95°F), stop the output when over 75°C° (167°F) and restart output when below 65°C (149°F). 
Self-testing function to test without a console. 
Each channel has individual 0-6% preheat setting for protecting loads. 
Each channel can be set as dimming or non-dimming.

 
Power supply 100?120V AC, 200?240V AC  50/60 Hz, 3?4w (1?3w optional)
Output       Maximal 20A per channel, total 20A.
DMX signal input/ output DMX512 
DMX signal connector  XLR-5pin, XLR-3pin, 6p4c phone jack connector 
Analog signal input  0 --- 10V DC 6 Channels ( 9 pin D-type, female )
Analog signal power input   DC 0-10V 
Analog signal connector   D-Type Plug 9Pin(F) 
Analog input channel   9 channels
Preheat setings 0 --- 6%
Dimension 19? 2U, 482(W) x 88(H) x 313(D) mm
Weight         8  Kg