Content |
Powerlight 1212D is a 12-channel digital dimmer (12A), mounted in a sturdy metal 3U rack container.All the controls and settings are accessible by means of the buttons on the front panel and can be monitored on the built-in display. The on-board microcomputer controls a comprehensive series of functions (soft patch, channel mode, channel level, pre-heat, equalization curves, etc.). Powerlight 1212D was designed paying great attention to reliability and adopts avant-garde technical solutions, including internal self-diagnosis, forced ventilation with air flow proportional to the temperature and output protection with a thermal magnetic circuit-breaker on each channel. Powerlight 1212D can also be used without an external controller: in fact, it's possible to program 4 different chases with a maximum of 32 steps each.On-board software can be upgraded via RS-232. Powerlight 1212D is available with a choice of 5 different connector panels: ILME 24, ILME 16, Cabur, Socapex and Powercon.
TECHNICAL DATA 12-channel digital dimmer, 12A per channel Thermal magnetic circuit-breaker fo each channel 7 equalization curves per channel 4 Programmable chases Switch-on with recoll of previous status Filter ramp time (peak to peak) 250 micro sec Software upgrade via DMX DMX In and link-thru connectors Automatic frequency selection (50/60 Hz) 110-220V single phase 50/60Hz power supply 380V three phase 50/60hz power supply Forced air ventilation (Variable) Overheating protection Phase connection control Self-testing with indication of any irregularities Updatable with programming kit (CABUR) (ILME 24) (SOCAPEX) (POWERCON) Dimensions: L 442 H 133 D400 ) Weight: 18 Kg |
WD 1215 DMX 12 channels digital module dimmer. This dimmer has incorporated a 32 bit high power microcomputer with aa time processing unit. Each channel can be programmed with the adress, a control curve, the limitation, the preheat of the lamps and the loadcheck. 12 internal memories. Can be linked with oyher dimmers. Protections: Short circuit, power failure memory. Alarm of over voltage. Temperature with switch off. Electronic fuse and loadcheck. 10A per channel. 3 phase connection. Dimensions: 483x178x436 mm. Weight: 31 Kgs. | 2U digital Dimmer, 6 channels with 10A current each, LCD display, single or full adjusting lamp pre-heat, Softpatch, manual channel operation, Curve: Linear, Square, Switch, DMX 512 in/out 3-pin XLR or analogue 0-10V, 1-phase or 3-phase 380-230V AC, 50Hz, 10Α automatic circuit breaker per channel. Dimensions: 410x482x95mm. Weight: 8kg. (70064122). Applications: live / disco / bar / restaurant / theaters.
6x10A dimmer for DMX & analog signals, connection via terminal blocks
- Universal dimmer pack for professional use
- Can be operated 1-phase or 3-phase
- 6 x 10 A
- DMX control or analog control possible
- The DMX-starting address can be adjusted on the device
- Synchronization of several devices possible via DMX
- Adjusting the lamp pre-heat
- All modes are displayed via LEDs and the display
- With automatic circuit breaker per channel
- Channel-outputs on the rearpanel via pole connectors
- Only for professional use
- Preprogrammed 12 chasers
- Can be operated in 6 CH mode
- Controlling by Analog 0-10 V; stand-alone; DMX
- (19") 48.3 cm rack installation 2 U
Power supply: |
230/380 V AC, 50 Hz |
Output power: |
Max. 13800 W
Max. 2300 W per channal |
Output current: |
Max. 60 A |
Power connection: |
Mains input via screw terminal |
Power output: |
Screw terminal |
Power output fuse per channel: |
C 10 A Fuse resettable |
Programs: |
Preprogrammed 12 Chasers |
DMX channels: |
6 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Control: |
Analog 0-10 V; stand-alone; DMX |
Control channels: |
6 |
Color: |
Black |
Housing design: |
(19") 48.3 cm rack installation 2 U |
Dimensions: |
Width: 48,3 cm
Depth: 41 cm
Height: 8,9 cm |
|
- Universal dimmer pack for professional use
- Can be operated 1-phase or 3-phase
- 6 x 20 A
- DMX-control or analogue control possible
- The DMX-starting address can be adjusted on the device
- Synchronisation of several DPX-620 possible via DMX
- Adjusting the lamp pre-heat
- All modes are displayed via LEDs and the display
- With automatic circuit breaker per channel
- Channel-outputs on the rearpanel via pole connectors
- Only for professional use
Power supply: | 230-380 V AC, 50 Hz ~ | Max. power output: | 27600 W | Max. current: | 120 A | Number of control channels: | 6 | Max. output/channel: | 4600 W | Max. current/channel: | 20 A | Integrated programs: | 12 | Output sockets: | via pole connectors | Circuit breaker: | 6 x C 20 A | Dimensions (WxDxH): | 420 x 482 x 95 mm | | Rack installation with 2 U | Minimum mounting depth: | 500 mm | Weight: | 8 kg |
|
Zero88 Betapack3 CEE17 + DMX
Excellent value 6 channel dimmers for multipurpose use
The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available.
Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards.
The Betapack 3 range is available with MCB?s per channel giving you peace of mind and maximum protection.
The versatility of the Betapack 3 means it can be 19" rack or wall mounted using the brackets supplied or made portable by adding the optional "Easicarry" kit consisting of a handle and four feet. Its legendary reliability and durability make it the dimmer of choice for a huge variety of venues worldwide.
Features |
- MCB protection as standard
- Isolated DMX input
- Patchable per channel
- Preheat, Topset and Dimmer Law selectable per channel
- 12 programmable backup memories
- 3 programmable 99-step sequences with adjustable times
- Auto DMX termination when loop-through plug is removed
- Auto frequency tracking
|
- Lock and Reset functions
- Temperature monitoring and progressive overheat shutdown
- Convection cooled
- DMX Status indication
- 19" Rack and Wall mounting brackets included
- Easy to service- common service operations need only a screwdriver
| |
Digital 6-channel dimmer pack - Universal dimmer pack for professional use
- Can be operated 1-phase or 3-phase
- 6 x 10 A
- DMX-control or analogue control possible
- The DMX-starting address can be adjusted on the device
- Synchronisation of several DPX-610 S possible via DMX
- Adjusting the lamp pre-heat
- All modes are displayed via LEDs and the display
- With automatic circuit breaker per channel
- Channel-outputs on the rearpanel via safety sockets
|
Reviews
There are no reviews yet.